Copy · Honeywell Maintenance Manual Temporary Revision No 165 · 3 pages

© Honeywell International Inc. Filed by the FAA in regulations.gov docket FAA-2021-1185; AD 2022-10-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'b7221819ee3cc5e2ac99fc5825ea562c275449f593c62ca8671133cf7a6cb5f0'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

MAI

NTENANCE MANUAL T5313B, T5317A, T5317A-1, T5317B, T5317BCV TEMPORARY REVISION NO. 165

330.2 Page 1 of 3 29 Jul 2020 © Honeywell International Inc. Do not copy without express permission of Honeywell.

TO HOLDERS OF GAS TURBINE ENGINE MAINTENANCE MANUAL 330.2, REVISION 7, DATED 15 MAY 2020.

WARNING: READ EACH PAGE CAREFULLY. PUT THE PAGE INTO THE APPLICABLE SECTION AS SHOWN. THIS TEMPORARY REVISION CAN CONTAIN PAGES THAT REFER TO DIFFERENT SECTIONS OF THIS CHAPTER. MAKE SURE THAT THE TEMPORARY REVISION IS CORRECTLY ADDED INTO THE MANUAL. IF YOU DO NOT OBEY THESE

INSTRUCTIONS, THERE IS A RISK THE MAINTENANCE PROCEDURE WILL NOT BE DONE CORRECTLY.

IN SERT THIS PAGE AS THE FIRST PAGES OF THE MANUAL.

Temporary Revision Number Applicable Chapter/Section/Subject Number, Page Number 165 71-00-00, 57 Exp ort Control These items are controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.

ECCN: 9E991 Honeywell – Confidential

THIS DOCUMENT AND ALL INFORMATION AND EXPRESSION CONTAINED HEREIN ARE THE PROPERTY OF HONEYWELL INTERNATIONAL INC., ARE PROVIDED IN CONFIDENCE, AND MAY BE USED BY PERSONS REQUIRED BY FEDERAL AVIATION REGULATION PART 21.50 TO COMPLY WITH ANY OF THE TERMS OF THESE INSTRUCTIONS. EXCEPT AS SET FORTH ABOVE, NO PERSON MAY,

IN WHOLE OR IN PART, USE, DUPLICATE OR DISCLOSE THIS INFORMATION FOR ANY PURPOSE WITHOUT THE PRIOR WRITTEN PERMISSION OF HONEYWELL INTERNATIONAL INC.

Copyright - Notice Copyright 2020 Honeywell International Inc. All rights reserved.

Honeywell is a registered trademark of Honeywell International Inc.

All other marks are owned by their respective companies.

RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS UP41242

MAINTENANCE MANUAL T5313B, T5317A, T5317A-1, T5317B, T5317BCV

TEMPORARY REVISION NO. 165

71-00-00 Page 2 of 3 29 Jul 2020

© Honeywell International Inc. Do not copy without express permission of Honeywell.

INSERT PAGE 2 OF 3 THRU PAGE 3 OF 3 FACING 71-00-00, PAGE 57.

Reason: To add Step 11.E.(26)(i).

Step 11.E.(26)(i) is added as follows:

11. E. (26)

(i) Engine shall be shut down in accordance with the Aircraft manual.

RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS UP41242

MAINTENANCE MANUAL T5313B, T5317A, T5317A-1, T5317B, T5317BCV

TEMPORARY REVISION NO. 165

71-00-00 Page 3 of 3 29 Jul 2020

© Honeywell International Inc. Do not copy without express permission of Honeywell.

Reason: To change Paragraph 11.F. from “Engine Shutdown” to “Special Vibration Check” and to add special vibration check procedure.

Paragraph 11.F. is changed as follows:

11.

F. Special Vibration Check

A special engine vibration check is required to determine if the engine has vibration characteristics which have been associated with N2 spur gear failures. See Service Bulletin T5313B/17-0100 or T53-0147. This check is required for all engines that have PN 1-070-062-04 or PN 1-070-062-06 spur gear installed at a schedule defined in Service Bulletin T5313B/17-0001.

(1) Mounting Bracket PN LTCT535 modification instructions if not previously modified for this special check.

(a) Locate the center of the three existing accelerometer mounting holes.

(b) Drill a 0.213-in. (No. 3 drill bit) through the bracket and deburr.

(c) Thread the hole with a 0.250-28 tap. This hole is used to hold the accelerometer flush to the bracket. Any deviation could result in false data generation during the vibration check.

(2) Follow vibration equipment manufactures instructions for warm-up and installation of the equipment.

(3) There will be one vibration sensor installed at the No. 1 pick-up location (lifting eye on top of the inlet housing). Use Mounting Bracket PN LTCT535 (it may require shimming to secure it tightly).

WARNING: A LIMIT OF 0.2 IPS HAS BEEN ESTABLISHED FOR ANY PEAK WITHIN THE RPM/FREQUENCY BANDS. IF THIS LIMIT IS EXCEEDED IN THE 225K TO 250K

RANGE THE TEST MUST BE TERMINATED AND ENGINE REMOVED FROM SERVICE.

(4) After installing the equipment, perform the vibration test using the parameters listed in Table 1.

(5) Honeywell recommends engines that pass this vibration check within the limit of 0.2 IPS be returned to service.

Table 1. Special Vibration Check Points Output Shaft RPM N2% N1% RPM/FREQ 6200 94 90 200K to 300K 6400 97 85 200K to 300K 6400 97 90 200K to 300K 6300 95.5 95 200K to 300K 6400 97 95 200K to 300K 6500 98.5 95 200K to 300K 6400 97 MAX 200K to 300K 6600 100 90 200K to 300K NOTE: CPS Freq is 3333 to 5000 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS UP41242