Copy · IAE V2500-ENG-72-A0706 R2 · 26 pages

© IAE International Aero Engines AG. Filed by the FAA in regulations.gov docket FAA-2020-0700; AD 2021-05-18 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '4cecf363bbc85f49edeb57192bf5fe49841e2191ffcd0edebc6796bdae8edb87'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

██ ██ ALERT SER VICE

BULLETIN

REVISION NOTICE

NON-MODIFICA TION ALER T SER VICE

BULLETIN — ENGINE —

DIFFUSER CASE REAR OUTER FLANGE —

DIFFUSER CASE “M” FLANGE

REPETITIVE VISUAL

INSPECTION FOR CRACKS T urbojet Engine Service Bulletin No.

V2500-ENG-72-A0706 Revision No.

2 dated November 8, 2019 .

Revision History Original Issue February 14, 2019 Revision 1 dated June 28, 2019 Revision 2 dated November 8, 2019 Reason for the Revision T o reduce the initial inspection criteria for T able 1 from 19,500 cycles to 19,000 cycles for engines installed on aircraft.

T o reduce the initial cyclic inspection limit in T able 1 from 20,800 cycles to 20,300 cycles.

T o add a note in T able 1 that this inspection is not applicable to dif fuser case rear outer flanges in shop with less than 19,000 cycles.

T o add requirements in T able 1 that it is necessary to replace the dif fuser case rear outer flange with 20,000 cycles or more at the start of April 1, 2020 as specified.

T o add the statement in T able 1 that the dif fuser case rear outer flanges that have been replaced by VRS 3633 resets the flange cycles to zero

(0), as long as done before April 1, 2020.

T o add Flourescent Penetrant Inspection procedure to the Accomplishment Instructions if indication can not be confirmed as a crack.

Ef fect of Revision on Prior Compliance None.

This is a Complete Revision (Not Applicable to the SGML version) The contents are in accordance with the list of ef fective pages.

All pages have the current revision number .

T echnical changes are marked with black bars.

MODEL

APPLICA TION V2500-A1, V2522-A5, V2524-A5, V2527-A5, V2527E-A5, V2527M-A5, V2530-A5, V2533-A5, V2525-D5, V2528-D5

BULLETIN ISSUE

SEQUENCE V2500 Series 72-A0706 Page Revision No.

Date 1 thru 24 2 November 7/19 A copy of this Revision Notice and any future revision notices must be filed as a permanent record with your copy of the subject bulletin.

V2500-ENG-72-A0706 Page 1 of 1 IAE

PROPRIET AR Y

INFORMA TION © IAE International Aero Engines AG (date as above).

All rights reserved.

No text on this page: it may be a figure. Open the PDF to see it.

██ ██ ALERT SER VICE

BULLETIN

NON-MODIFICA TION ALER T SER VICE

BULLETIN — ENGINE —

DIFFUSER CASE REAR OUTER FLANGE —

DIFFUSER CASE “M” FLANGE

REPETITIVE VISUAL

INSPECTION FOR CRACKS MODEL

APPLICA TION V2500-A1, V2522-A5, V2524-A5, V2527-A5, V2527E-A5, V2527M-A5, V2530-A5, V2533-A5, V2525-D5, V2528-D5

BULLETIN ISSUE

SEQUENCE V2500 Series 72-A0706 A T A NUMBER 72-42-1 1 IAE

PROPRIET AR Y

INFORMA TION This document is the property of International Aero Engines (IAE).

Y ou may not possess, use, copy or disclose this document or any information in it, for any purpose, including without limitation to design, manufacture, or repair parts, or obtain F AA or other government approval to do so, without IAE’ s express written permission.

Neither receipt nor possession of this document alone, from any source, constitutes such permission.

Possession, use, copying or disclosure by anyone without IAE’ s express written permission is not authorized and may result in criminal and/or civil liability .

Export Classification:

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

F AA Airworthiness Directive Directive No.

2019-06-06 Compliance Category Category 3 P&W Distribution Code V2500 l February 14/19 V2500-ENG-72-A0706

REVISION NO.

2 - November 7/19 Page 1 of 24 © IAE International Aero Engines AG (date as above).

All rights reserved.

Summary The purpose of this Non-Modification Alert Service Bulletin (NMASB) is to provide instructions to visually inspect the dif fuser case rear outer flange using a borescope.

Cracking has been observed on the dif fuser case rear outer flange on “M” Flange.

This NMASB is to inspect for cracking on the dif fuser case rear outer flange at specified intervals.

This NMASB will also add a time requirement to remove the part numbers listed in this NMASB, at the start of April 1, 2020 and after .

IAE plans to issue a modification Service Bulletin V2500-ENG-72-0709 for flange replacement.

Planning Information Ef fectivity Data Engine Models Applicable V2500-A1 Engine Serial No.

— All Engines with Dif fuser Case Assembly , PN 2A0051, 2A2883-01, 2A2889-01, 2A2891-01 , 2A2896-01, or 2A3132 installed.

V2522-A5, V2524-A5, V2527M-A5, V2527-A5, V2527E-A5, V2530-A5, V2533-A5 Engine Serial No.

— All Engines with Dif fuser Case Assembly , PN 2A2081-01, 2A2581-01, 2A2897-01, 2A2885-01, 2A2889-01, or 2A2891-01 installed.

V2525-D5, V2528-D5 Engine Serial No.

— All Engines with Dif fuser Case Assembly , PN 2A2081-01, 2A2581-01, or 2A2885-01, 2A2889-01 , 2A2891-01, or 2A2897-01 installed.

Concurrent Requirements There are no concurrent requirements.

Reason

1.

Condition:

This inspection will lessen the possibility of the dif fuser case rear outer flange crack(s) propagating and causing a rupture of the dif fuser case.

This NMASB introduces a visual inspection using a borescope of the dif fuser case rear outer flange at intervals.

2.

Background:

A crack was observed on the dif fuser case rear outer flange that propagated from the bolt hole inner diameter into the dif fuser case wall.

3.

Objective:

Perform a visual inspection using the borescope 360 degrees around the dif fuser case rear outer flange to inspect for crack(s).

4.

Substantiation:

The inspection method provided has shown to identify crack(s) on the dif fuser case rear outer flange.

5.

Ef fects of Bulletin on:

Removal/Installation:

Not Af fected.

Disassembly/Assembly:

Not Af fected.

Cleaning:

Not Af fected.

Inspection/Check:

Not Af fected.

Repair:

Not Af fected.

T esting:

Not Af fected.

6.

Supplemental Information l February 14/19 V2500-ENG-72-A0706

REVISION NO.

2 - November 7/19 Page 2 IAE

PROPRIET AR Y

INFORMA TION © © © IAE International Aero Engines AG (date as above).

All rights reserved.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

None.

Description Do a visual inspection, using a borescope, of the dif fuser case rear outer flange, dif fuser case wall and on the OD strap of “M” Flange, which includes the dif fuser case, Nozzle Guide V ane (NGV) support and High Pressure T urbine (HPT) case for cracks.

This is a repetitive visual inspection that will initiate as shown in T able

1.

Compliance Category 3 This is an inspection for engines installed on aircraft and must be accomplished at the specified cycles as follows:

l February 14/19 V2500-ENG-72-A0706

REVISION NO.

2 - November 7/19 Page 3 IAE

PROPRIET AR Y

INFORMA TION © © © IAE International Aero Engines AG (date as above).

All rights reserved.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

T able 1:

“M” Flange Cycle Inspection Limits April 1, 2020 And After For Engines Not Installed On Aircraft For dif fuser case rear outer flanges in shop with 20,000 cycles or more:

The dif fuser case rear outer flange must be replaced as specified in the flange replacement modification.

As of April 1, 2020, the part numbers listed in this NMASB that have rear outer flanges with 20,000 cycles or more cannot return to service.

For Engines Installed On Aircraft For dif fuser case rear outer flanges on-wing with 20,000 cycles or more:

The dif fuser case rear outer flange must be inspected at the specified intervals in T able 1 and the flange must be replaced at the next shop visit as specified in the flange replacement modification.

As of April 1, 2020, the part numbers listed in this NMASB that have 20,000 cycles or more on the rear outer flange cannot return to service after their next shop visit and the dif fuser case rear outer flange must be replaced per the flange replacement modification.

For dif fuser cases with rear outer flange with 19,000 cycles or more:

Perform an initial inspection using the intervals based on the Cycles Since Last FPI (CSLFPI) of the dif fuser case rear outer flange.

Cycles Since Last Flourescent Penetrant Inspection (CSLFPI) (Cycles) Inspect within (Cycles) Re-inspection Interval For No Cracks Found (Cycles)* Greater than 30,000 250 2,100 20,000 to 29,999 500 2,100 15,000 to 19,999 1,000 2,100 1 to14,999 1,300 2,100 0 In-Shop 2,100 *If cracks are found:

Follow T able 2 for the V2500 A1/A5 Fly-On Limits and T able 4 for the V2500 D5 Fly-On Limits.

l February 14/19 V2500-ENG-72-A0706

REVISION NO.

2 - November 7/19 Page 4 IAE

PROPRIET AR Y

INFORMA TION © © © IAE International Aero Engines AG (date as above).

All rights reserved.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

For dif fuser case rear outer flanges with less than 19,000 cycles:

Perform an initial inspection of the dif fuser case rear outer flange before reaching 20,300 cycles .

Provided no cracks are found, re-inspect at an interval of 2,100 cycles.

If cracks are found, follow T able 2 for the V2500 A1/A5 Fly-On Limits and T able 4 for the V2500 D5 Fly-On Limits.

Note As Follows:

NOTE :

This inspection is not applicable to dif fuser case rear outer flanges in shop with less than 19,000 cycles.

NOTE :

Before April 1, 2020, Flange replacement of the dif fuser case rear outer flange (VRS3633, Repair-028) resets the flange cycles to zero.

NOTE :

April 1, 2020 and after , dif fuser cases with rear outer flanges that have 20,000 cycles or more:

Replace the dif fuser case rear outer flange at the next shop visit per flange replacement modification.

NOTE :

Fluorescent Penetrant Inspection (FPI) of the dif fuser case rear outer flange bolt holes would reset the CSLFPI to zero.

NOTE :

If the cycles on the dif fuser case rear outer flange cannot be determined, you must use the total cycles on the dif fuser case.

NOTE :

If the cycles on the dif fuser case cannot be determined, you must use the total engine cycles if it can be documented that the dif fuser case was always with the engine.

NOTE :

If the cycles on the dif fuser case rear outer flange cannot be determined based on any of the above criteria then you must inspect in 250 cycles.

NOTE :

A FPI of the dif fuser case would have been accomplished at a Dif fuser W orkscope Level 3, and may have been accomplished at a lower Dif fuser W orkscope level.

NOTE :

All inspections completed with References 7, 8, 9, 10, and 1 1, Special Instructions (SI) SI341F-18, SI350F-18, SI356F-18, SI372F-18, and SI04F-19, are in compliance with this NMASB .

All engines that have been previously inspected must use the limits provided in this NMASB .

Approval Data The compliance statement and the procedures described in this NMASB have been shown to comply with the applicable Federal A viation Regulations and are F

AA-APPROVED for the engine model listed.

The aircraft T ype Certificate (TC) holder has been informed of this inspection.

Manpower The estimate of man-hours of labor directly necessary to do the intent of this NMASB are as follows:

For Engines Installed On Aircraft

1.

Necessary to Gain and Close Access .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

0.8 hours.

2.

Necessary for Inspection .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

1.0 hours.

3.

T otal Necessary Man-Hours .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

1.8 hours.

l February 14/19 V2500-ENG-72-A0706

REVISION NO.

2 - November 7/19 Page 5 IAE

PROPRIET AR Y

INFORMA TION © © © IAE International Aero Engines AG (date as above).

All rights reserved.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

W eight and Balance

1.

W eight Change None.

2.

Moment Arm No Ef fect.

3.

Datum Engine Front Mount Centerline (Power Plant Station (PPS)

100) Electrical Load Data This NMASB has no ef fect on the aircraft electrical load.

Software Accomplishment Summary Not Applicable.

References NOTE :

In 2014 IAE converted the V2500 T echnical Publications to a new system.

As a result of the conversion, some manuals were consolidated.

All manuals received new P&W part numbers.

T o facilitate the use of this NMASB , a T echnical Publications conversion table is provided in the Appendix.

1.

V2500 Standard Practices and Processes, P&W Ref.

PN 2A4414, Chapter/Section 72-42-00.

2.

V2500-A1 Series Illustrated Parts Catalog, P&W Ref.

PN 2A4427, Chapter/Section 72-42-1

1.

3.

V2500-A5 Series Illustrated Parts Catalog, P&W Ref.

PN 2A4428, Chapter/Section 72-42-1

1.

4.

V2500-D5, Series Illustrated Parts Catalog, P&W Ref.

PN 2A4426, Chapter/Section 72-42-1

1.

5.

V2500 A1/A5 Aircraft Maintenance Manual (AMM).

6.

V2500-D5 Aircraft Maintenance Manual (AMM).

7.

V2500 Special Instruction (SI) SI341F-18.

8.

V2500 Special Instruction (SI) SI350F-18.

9.

V2500 Special Instruction (SI) SI356F-18.

10.

V2500 Special Instruction (SI) SI372F-18.

1.

V2500 Special Instruction (SI) SI04F-18.

12.

F AA Airworthiness Directive 2019-06-06.

Other Publications Af fected Not Applicable.

Interchangeability of Parts Not Applicable.

l February 14/19 V2500-ENG-72-A0706

REVISION NO.

2 - November 7/19 Page 6 IAE

PROPRIET AR Y

INFORMA TION © © © IAE International Aero Engines AG (date as above).

All rights reserved.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

Information in the Appendix Alternate Accomplishment Instructions (No) Progression Charts (No) Added Data (Y es) Revision to T able of Limits (No) Inspection Procedures (No) l February 14/19 V2500-ENG-72-A0706

REVISION NO.

2 - November 7/19 Page 7 IAE

PROPRIET AR Y

INFORMA TION © © © IAE International Aero Engines AG (date as above).

All rights reserved.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

Material Information Material — Price and A vailability

1.

Part prices were not available at the time of NMASB publication.

Contact IAE Spares Management & Logistics for firm quotations.

2.

There is no kit provided to do this NMASB .

3.

Part availability information is provided in material data Instructions — Disposition.

Industry Support Program Contact your local IAE Customer Field Service Representative or Customer Fleet Director .

The material data that follows is for each engine.

Not Applicable.

For V2500-A1 Engines:

New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 1 * CASE — DIFSR, ASSY OF 2A0051 (72-42-1 1-01-010)

(4)(X) 1 * CASE — DIFSR ASSY OF 2A2889-01 (72-42-1 1-01-010 A)

(4)(X) 1 * CASE — DIFSR, ASSY OF 2A2883-01 (72-42-1 1-01-010 B)

(4)(X) 1 * CASE —- ASSY OF ,

DIFFUSER 2A3132 (72-42-1 1-01-010 C)

(4)(X) 1 * CASE —- ASSY OF ,

DIFFUSER 2A2891-01 (72-42-1 1-01-010 F)

(4)(X) 1 * CASE —- ASSY OF ,

DIFFUSER 2A2896-01 (72-42-1 1-01-010 E)

(4)(X) The material data that follows is for each engine.

Not Applicable.

For V2522-A5, V2524-A5, V2527-A5, V2527E-A5, V2527M-A5, V2530-A5, V2533-A5 Engines:

New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 1 * CASE — A/O

DIFFUSER 2A2081-01 (72-42-1 1-01-010)

(4)(X) 1 * CASE — A/O

DIFFUSER 2A2581-01 (72-42-1 1-01-010 A)

(4)(X) 1 * CASE — A/O

DIFFUSER 2A2897-01 (72-42-1 1-01-010 B)

(4)(X) l February 14/19 V2500-ENG-72-A0706

REVISION NO.

2 - November 7/19 Page 8 IAE

PROPRIET AR Y

INFORMA TION © © © IAE International Aero Engines AG (date as above).

All rights reserved.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 1 * CASE — A/O

DIFFUSER 2A2885-01 (72-42-1 1-01-010 C)

(4)(X) 1 * CASE — A/O

DIFFUSER 2A2889-01 (72-42-1 1-01-010 D)

(4)(X) 1 * CASE — A/O

DIFFUSER 2A2891-01 (72-42-1 1-01-010E)

(4)(X) The material data that follows is for each engine.

For V2525-D5, V2528-D5 Engines:

New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 1 * CASE — A/O

DIFFUSER 2A2581-01 (72-42-1 1-01-010)

(4)(X) 1 * CASE — A/O

DIFFUSER 2A2081-01 (72-42-1 1-01-010 A)

(4)(X) 1 * CASE — A/O

DIFFUSER 2A2891-01 (72-42-1 1-01-010 B)

(4)(X) 1 * CASE — A/O

DIFFUSER 2A2885-01 (72-42-1 1-01-010 C)

(4)(X) 1 * CASE — A/O

DIFFUSER 2A2889-01 (72-42-1 1-01-010 D)

(4)(X) 1 * CASE — A/O

DIFFUSER 2A2897-01 (72-42-1 1-01-010 E)

(4)(X) Instructions/Disposition Code Statements:

Parts Modification Conditions Estimated part prices are provided when they are available at time of publication.

The Estimate of Unit Price is only for planning purposes and does not constitute a firm quotation.

An asterisk (*) is shown where part pricing information was unavailable.

In either case, contact IAE Spares for firm quotations.

(4) Do an inspection as specified in the Accomplishment Instructions.

Spare Parts A vailability (X) See Reference 2, 3, or 4, Illustrated Parts Catalog for applicable replacement parts.

V endor Services or Special Components/Materials Not Applicable.

T ooling — Price and A vailability Special tools are not required to accomplish this NMASB .

l February 14/19 V2500-ENG-72-A0706

REVISION NO.

2 - November 7/19 Page 9 IAE

PROPRIET AR Y

INFORMA TION © © © IAE International Aero Engines AG (date as above).

All rights reserved.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

Reidentified Parts Not Applicable.

Other Material Information Data Consumable materials required to incorporate this NMASB Part Number Part Name CoMat 01-060 CoMat 01-031 CoMat 01-393 Acetone CoMat 02-099 Lint — Free Cloth CoMat 01-124 CoMat 01-410 Isopropyl Alcohol l February 14/19 V2500-ENG-72-A0706

REVISION NO.

2 - November 7/19 Page 10 IAE

PROPRIET AR Y

INFORMA TION © © © IAE International Aero Engines AG (date as above).

All rights reserved.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

Pages 13–24 of 26