Copy · SB 380-25-06 Iss03 · 16 pages

© Ipeco Holdings Ltd. Filed by the FAA in regulations.gov docket FAA-2024-2017; AD 2024-16-14 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'd71cd41a6c0c46b77cf581cf7b32bd0d46c922abaf0bd05930acd12edc012935'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1 of 2

TRANSMITTAL SHEET

THIS PAGE TRANSMITS A REVISION TO SERVICE BULLETIN NUMBER 380-25-06 THIS REVISION DATED 17th July 2024

PLACE THIS PAGE UNDER FRONT SHEET OF SERVICE BULLETIN REASON FOR REVISION:

Rocker switch cap inspection added and SB revised to mandatory compliance.

PREVIOUS ISSUES: 2 DATE: 9th May 2017 1 8th March 2017 PROCEDURE:

Remove all pages and replace with pages at issue 3.

DETAIL OF CHANGE PAGE No. ISSUE No. DESCRIPTION OF CHANGE 1 2 3 4 5 6 7-9 10-14 3 3 3 3 3 3 3 3 Title revised and issue number raised to issue 3. Confidential and proprietary statement added.

Page number and issue revised.

Part numbers revised in effectivity section. Reason section revised to add clarity. Compliance section changed to mandatory. Approval statement revised.

Manpower, reference, publications affected, and interchangeability sections revised. Warranty section added.

Material cost and availability section revised.

Section B to G re-located. Special tooling sectioned revised.

Accomplishment instructions revised to add Part A rocker switch cap inspection.

Pages added.

Enclosure A to RA-24-02601

Page 2OCROpen in PDF

Enclosure A to RA-24-02601 COMPILED BY B. WORSELL CHECKED BY fast freling TECHNICALLY APPROVED BY 12 JRO SMITH COMMERCIALLY APPROVED BY James D'Costa JD COsta Page 2 of 2

SERVICE BULLETIN Issue: 03 Date: 17 July 2024 Page 1 of 14 Form H517-1

EQUIPMENT / FURNISHINGS

FLIGHT COMPARTMENT

ROCKER SWITCH CAPS

IMPROVEMENT

SERVICE BULLETIN NUMBER 380-25-06 ISSUE 03 The technical data in this document is controlled for export under the export administration regulations (EAR), 15 CFR parts 730-774, ECCN: 9E991. Violations of these laws may be subject to fines and penalties under the export administration act.

ISSUED BY:

CAGE CODE: K9075

IPECO HOLDINGS LTD

AVIATION WAY

SOUTHEND ON SEA SS2 6UN

UNITED KINGDOM TELEPHONE: +44 (0)1702 545118 EMAIL: Technicalsupport@ipeco.com IPECO HOLDINGS LTD IS A COMPANY REGISTERED IN ENGLAND AND WALES, COMPANY NO. 00672443 © Ipeco Holdings Ltd , 2017 - 2024. All rights reserved. This is a confidential and proprietary document. This document and all information contained herein is the sole property of and proprietary to Ipeco Holdings Ltd. and is supplied in confidence. No intellectual property rights are granted by the delivery of this document nor by the disclosure of its content. This document shall not be reproduced or disclosed to a third party nor shall it be used for any purpose other than that for which it is supplied without the express prior written consent of Ipeco Holdings Ltd.

Enclosure A to RA-24-02601

Page 4OCROpen in PDF

Enclosure A to RA-24-02601 -peco

SERVICE BULLETIN SERVICE BULLETIN No.

380-25-06 ....

Q000 COMPILED BY B. Murd B. WORSELL CHECKED BY Jack filing evene

TECHNICALLY APPROVED BY COMMERCIALLY APPROVED BY James D'Costa I D'Costa 380-25-06 Issue: 03 Date: 17 July 2024 Page 2 of 14 Form H517-1

SERVICE BULLETIN

380-25-06

Issue: 03 Date: 17 July 2024 Page 3 of 14 Form H517-1 1 Planning Information A. Effectivity This Service Bulletin is applicable to the Ipeco model 380 series seats installed on the Boeing 787 aircraft with the part numbers that follow:

Ipeco Part Number Boeing Part Number Captain 3A380-0007-**-* S632Z301-** First Officer 3A380-0008-**-* S632Z301-** B. Concurrent Requirements None.

C. Reason Ipeco have had in-service reports of the seat back fwd/aft rocker switch cap being loose. A loose/dislodged rocker switch cap can result in an unintended seat movement.

D. Description This service bulletin inspects that all the rocker switch caps (fwd/aft, up/down and main power) have been bonded and, if required, provides instruction to bond the rocker switch caps.

E. Compliance Recommendation Mandatory.

F. Approval This Service Bulletin has been reviewed and approved by Boeing. It contains no modification information that revises the approved configuration under the approval EASA.210.941.

Enclosure A to RA-24-02601

SERVICE BULLETIN

380-25-06

Issue: 03 Date: 17 July 2024 Page 4 of 14 Form H517-1 G. Manpower The procedures in this Service Bulletin will take approximately 0.5-man hour for each seat, when done at maintenance level. This Service Bulletin can be done on the aircraft at the discretion of the aircraft operator. Ipeco recommend this Service Bulletin is done at maintenance level.

This estimate does not include:

• Time to schedule the work.

• Time to examine the work.

• Time to find the tools.

H. Weight and Balance Weight difference from this change is negligible.

I. Electrical Load Data Not applicable.

J. Software Accomplishment Summary Not applicable.

K. References Ipeco Component Maintenance Manual 25-11-69 (SM684).

L. Publications Affected Ipeco Component Maintenance Manual 25-11-69 (SM684).

M. Interchangeability of Parts Not affected.

N. Warranty Statement The contents of this Service Bulletin are not covered by Ipeco warranty.

Enclosure A to RA-24-02601

SERVICE BULLETIN

380-25-06

Issue: 03 Date: 17 July 2024 Page 5 of 14 Form H517-1 2 Material Information A. Material Cost and Availability Required for each seat:

No materials are required to undertake this Service Bulletin.

For parts required to be replaced as part of the inspection of this Service Bulletin, follow the details below to order:

Operators not included in the regions below can send an order to:

Ipeco Holdings Limited Sales Department Aviation Way Southend-on-Sea SS2 6UN United Kingdom Telephone: +44 (0)1702 549371 E-mail: sales@ipeco.com Operators in the Americas region can send an order to:

Ipeco Inc 2275 Jefferson Street Torrance California 90501 USA Telephone: +1 310-783-4700 E-mail: sales@ipecoinc.com Operators in the Greater China region can send an order to:

Ipeco Service Centre Hong Kong Ltd.

21st Floor Nan Dao Commercial Building 359-361 Queen’s Road Central Hong Kong China Telephone: +852 2543 8039 E-mail: sales@ipeco.com.hk Enclosure A to RA-24-02601

SERVICE BULLETIN

380-25-06

Issue: 03 Date: 17 July 2024 Page 6 of 14 Form H517-1 Operators in the South East Asia, Oceania and Japan Region can send an order to:

Ipeco Singapore Pte Ltd 690 West Camp Road JTC Aviation Two #08-01/02/03 Singapore 797523 Telephone: +65 6932 1555 E-mail: sales@ipeco.com.sg B. Industry Support Information For the applicable warranty statement refer to section 1.N. Warranty Statement.

To find the prices of the components needed for this Service Bulletin refer to section 2.A. Material Cost and Availability.

C. Material Necessary for Each Component No Mod kit required.

Table 1 – List of Consumables Part Number Description Quantity CMM Ref.

1 Loctite 3090 Instant Adhesive AR N/A 2 Loctite 3092 Instant Adhesive AR N/A 3 *3A504-0055 Instant Adhesive AR N/A *Ipeco internal part number for Loctite 3090 for Ipeco internal use only.

D. Material Necessary for Each Spare Refer to Section 2.C. Material Necessary for Each Component.

E. Re-identified Parts / Existing Parts Accountability Not applicable.

F. Special Tooling – Price and Availability Special tooling listed in section 2.G is commercially available.

G. Special Tooling Necessary to do this Service Bulletin Sauter FH 200 Force Gauge (or equivalent).

Tooling specification:

Range: 200N Precision: 0.005.

Readout Resolution: 0.1N

Enclosure A to RA-24-02601

SERVICE BULLETIN

380-25-06

Issue: 03 Date: 17 July 2024 Page 7 of 14 Form H517-1 3 Accomplishment Instructions Note 1: Item numbers shown thus: - (*-**) refer to items from the Illustrated Parts List of CMM 25-11-69. For example, (1-30) refers to Figure 1, item 30.

Note 2: Item number shown thus: - (*) refer to items listed in the table(s) in section

2.C. Material Necessary for Each Component. For example, (3) refers to item 3.

Note 3: Repairs, rework or modifications in this Service Bulletin can be done with the seat in the aircraft.

Note 4: In this Service Bulletin keep all removed items if not instructed to discard.

Part A: Rocker Switch Cap Inspection The inspection instructions that follow can be done with the seat installed in the aircraft, with no power supplied to the seat.

Note: Please refer to the applicable section of the Boeing AMM for specific instructions on how to remove power from the seat.

1. Rocker switch cap visual inspection:

a. Visually inspect the rocker switch caps to ensure they are fitted and to check for any cracks. An example of a cracked rocker switch cap is shown in Figure 1.

b. Replace any rocker switches (3-290 or 3 -290A), (3-295), (3-265) or (3-355 or 3 -355A) in accordance with the CMM (25 -11-69) if the rocker switch caps are missing or if any crack is found.

Note: Replaced switches (3-290 or 3 -290A), (3 -295), (3 -265) or (3-355 or 3 -355A) must be bonded in accordance with the procedure set out in Part B of this Service Bulletin.

Note: Do Part A, paragraph 3; rocker switch cap pull tests for all switches (3-290 or 3-290A), (3-295), (3-265) or (3-355 or 3-355A) that do not require replacement.

Figure 1 - Example of a Cracked Rocker Switch Cap Rocker switch cap Enclosure A to RA-24-02601

SERVICE BULLETIN

380-25-06

Issue: 03 Date: 17 July 2024 Page 8 of 14 Form H517-1

2. Switch cover assy inspection:

a. Visually inspect the switch cover assy (1 -120 or 1 -120A) and the local areas for cracks. Areas for particular attention are shown in Figures 2 and 3.

b. Operate the switch cover (1 -121 or 1 -121A) to ensure that the switch cover hinge (1 -122) is functional and returns the switch cover (1-121 or 1-121A) to the closed position.

c. Replace any parts identified in Para 2a; if any crack is found or 2b; if the switch cover hinge is not functional, in accordance with the CMM (25-11-69).

Figure 2 - Switch Cover Assy Key Areas (View of Front of the Switch Cover Assy).

Figure 3 – Switch Cover Assy Key Areas (View of Rear of the Switch Cover Assy with the Cover Raised).

Enclosure A to RA-24-02601

SERVICE BULLETIN

380-25-06

Issue: 03 Date: 17 July 2024 Page 9 of 14 Form H517-1

3. Rocker switch cap pull tests:

Note: The steps that follow are to determine if the rocker switch caps are bonded or not.

a. Seat back fwd/aft rocker switch cap (3-355 or 3-355A) pull test with a force gauge:

i. Slowly pull in an upwards direction normal to the seat back fwd/aft switch (3-355 or 3-355A) mounting face until the rocker switch cap is removed or a force of 7lbf – 10lbf is achieved on the force gauge , as shown in Figure 4.

Note: The load is to be applied at one end of the switch in the midpoint laterally.

Note: Care must be taken to not exceed the 10lbf force as this can cause damage to the rocker switch mechanism and rocker switch cap.

Figure 4 - Force Gauge Pull Test

Enclosure A to RA-24-02601

SERVICE BULLETIN

380-25-06

Issue: 03 Date: 17 July 2024 Page 10 of 14 Form H517-1

CAUTION: BEFORE THE MAIN POWER SWITCH (3-265) PULL TEST IS

DONE, TAKE NOTE OF THE ON/OFF ORIENTATION TO RE-FIT IN THE CORRECT POSITION, IF REQUIRED.

Note: Visually inspect the switch guard (3-270 or 3-270A) for cracks or modifications and replace in accordance with the CMM.

b. Rocker switch cap pull test with a finger is applicable to all remaining switch caps (3-290 or 3-290A), (3-295) and (3-265):

i. Slowly apply a light finger pull with one finger in an upwards direction normal to the seat pan fwd/aft switch (3-290 or 3-290A), the up/down switch (3 -295), and the main power switch (3 -265) mounting face s until the rocker switch cap is removed or a force similar to that applied in Para 3a, as shown in Figure 5.

Note: The load is to be applied at one end of the switch in the midpoint laterally with a finger to replicate the force applied in Para 3a.

Figure 5 - Finger Pull Test on The Seat Pan Fwd/Aft Switch (3-290 or 3-290A)

c. Continue to Part B if any rocker switch caps were un-bonded, de-bonded or replaced when Part A was done.

d. Continue to Part C if all rocker switch caps remain secured and did not require replacement when Part A was done.

Enclosure A to RA-24-02601

Pages 13–16 of 16