TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '615080a6740531ca7a25e0751414403b6b2e294ce988404420501cbeaabaeb10' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '615080a6740531ca7a25e0751414403b6b2e294ce988404420501cbeaabaeb10' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Page 1 of 11 N° 109SP-167 DA TE: December 2, 2024 REV. : / - December 22, 2023 TITLE ATA 25 – HOIST CLUTCH REPLACEMENT
REVISION LOG First Issue An appropriate entry should be made in the aircraft log book upon accomplishment.
If ownership of aircraft has changed, please, forward to new owner.
Leonardo S.p.A.
Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) Italy Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595 ALERT
SERVICE BULLETIN
S.B. N°109SP-167 ALERT DATE: December 2, 2024 Page 2 of 11 REVISION: /
1. PLANNING INFORMATION A. EFFECTIVITY NOTE With reference to Figure 1 and 2, the application of the Service Bulletin 44314-398-01 is:
marked with Label ASB44314-398-01 positioned next to the Identification Plate of each Hoist;
recorded in the Hoist Log Card and/or maintenance records.
All Rescue Hoist Assemblies installed on helicopters or kept in stock listed in Table 1 and NOT already compliant with Onboard Systems (formerly Goodrich) Service Bulletin 44314-398-01.
P/N LHD P/N Onboard Systems S/N 3G2591V01532 44316-12-104 40024 3G2591V01532 44316-12-104 40039 3G2591V01532 44316-12-104 40057 3G2591V01532 44316-12-104 40062 3G2591V01532 44316-12-104 40071 3G2591V01532 44316-12-104 40110 3G2591V01532 44316-12-104 40124 3G2591V01532 44316-12-104 40154 3G2591V01532 44316-12-104 40184 3G2591V01532 44316-12-104 40185 3G2591V01532 44316-12-104 40189 3G2591V01532 44316-12-104 40206 3G2591V01532 44316-12-104 40320 3G2591V01532 44316-12-104 40398 3G2591V01532 44316-12-104 40441 3G2591V01532 44316-12-104 40443 3G2591V01532 44316-12-104 40452 3G2591V01532 44316-12-104 40477 3G2591V01532 44316-12-104 40493 Table 1
S.B. N°109SP-167 ALERT DATE: December 2, 2024 REVISION: / Page 3 of 11
P/N LHD P/N Onboard Systems S/N 3G2591V01532 44316-12-104 40505 3G2591V01532 44316-12-104 40535 3G2591V01532 44316-12-104 40558 3G2591V01532 44316-12-104 40747 3G2591V01532 44316-12-104 40756 3G2591V01532 44316-12-104 40765 3G2591V01532 44316-12-104 40767 3G2591V01532 44316-12-104 40769 3G2591V01532 44316-12-104 40775 Table 1 B. COMPLIANCE Within:
24 months / 1600 lifts / 1200 cycles whichever occurs first since initial manufacturing date or since last overload clutch replacement or 1 month / 66 lifts / 50 cycles whichever occurs first from the release date of this Service Bulletin whichever of the two above conditions occurs later.
C. CONCURRENT REQUIREMENTS N.A.
D. REASON Onboard Systems (formerly Goodrich) reported to Leonardo Helicopters about a batch of Hoist Assemblies suspected of containing overload clutch assemblies that may not have been assembled in accordance with the manufacturing “run-in” steps necessary for conditioning the internal friction disks. For this reason, Onboard Systems released Service Bulletin 44314-398-01 to remove the affected hoists from service in order to replace the suspected clutches. Service Bulletin 44314-398-01 may be performed only by Onboard Systems or by personnel and facilities officially trained and authorized by Onboard Systems.
This Service Bulletin provides the necessary instructions to replace the affected Rescue Hoist Assembly and to send it to Onboard Systems for modification.
S.B. N°109SP-167 ALERT DATE: December 2, 2024 Page 4 of 11 REVISION: / E. DESCRIPTION This Service Bulletin provides the necessary instructions on how to replace the Rescue Hoist Assembly with a serviceable one and to send the affected one to Onboard Systems for modification according to Service Bulletin 44314-398-01.
F. APPROVAL The technical content of this Service Bulletin is approved under the authority of DOA nr. EASA.21.J.005. For helicopters registered under other Aviation Authorities, before applying the Service Bulletin, applicable Aviation Authority approval must be checked within Local Aviation Authority.
EASA states mandatory compliance with inspections, modifications or technical directives and related time of compliance by means of relevant Airworthiness Directives.
If an aircraft listed in the effectivity embodies a modification or repair not LHD certified and affecting the content of this Service Bulletin, it is responsibility of the Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on the aircraft, for any adaptation necessary before incorporation of the present Service Bulletin.
G. MANPOWER To comply with this Service Bulletin, approximately four (4) MMH are deemed necessary.
MMH are based on hands-on time and can change with helicopter configuration, personnel and facilities available. MMH are not comprehensive of the overall hours necessary to get access to work areas and to remove all the equipment that interferes with the application of the prescribed instructions.
H. WEIGHT AND BALANCE N.A.
I. REFERENCES I.1 PUBLICATIONS Following Data Modules refer to AMP:
DATA MODULE DESCRIPTION PART DM01 0B-A-00-20-00-00A-120A-A Helicopter safety - Preoperation.
- DM02 0B-A-06-41-00-00A-010A-A Access doors and panels - General data -
S.B. N°109SP-167 ALERT DATE: December 2, 2024 REVISION: / Page 5 of 11
DATA MODULE DESCRIPTION PART DM03 0B-B-25-91-01-06A-720A-A Hoist - Install procedure - DM04 0B-B-25-91-01-06A-520A-A Hoist - Remove procedure -
I.2 ACRONYMS & ABBREVIATIONS AMDI Aircraft Material Data Information AMP Aircraft Maintenance Publication AR As Required C/A Cable Assy CSPP Common Standard Practices Publication DM Data Module DOA Design Organization Approval EASA European Union Aviation Safety Agency IPD Illustrated Parts Data Publication ITEP Illustrated Tools and Equipment Publication LHD Leonardo Helicopters Division MMH Maintenance Man Hours N.A. Not Applicable P/N Part Number SB Service Bulletin S/N Serial Number I.3 ANNEX N.A.
J. PUBLICATIONS AFFECTED N.A.
K. SOFTWARE ACCOMPLISHMENT SUMMARY N.A.
S.B. N°109SP-167 ALERT DATE: December 2, 2024 Page 6 of 11 REVISION: /
2. MATERIAL INFORMATION A. REQUIRED MATERIALS A.1 PARTS # P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTE LOG P/N 1 3G2591V01532 Core, hoist (Goodrich) AR . (1)(2) -
Refer also to IPD for the spares materials required to comply with the AMP DMs referenced in the accomplishment instructions.
A.2 CONSUMABLES Refer to AMDI for the consumable materials required to comply with the AMP DMs referenced in the accomplishment instructions.
A.3 LOGISTIC MATRIX N.A.
NOTES
(1) Q.ty 1 of this item is necessary to replace any affected hoist (refer to paragraph
1.A Effectivity) either installed or kept in stock .
(2) Please place the order directly to Onboard System. Refer to the Paragraph 2.C Industry Support Information of this Service Bulletin.
B. SPECIAL TOOLS Refer to ITEP for the special tools required to comply with the AMP DMs referenced in the accomplishment instructions.
SPECIAL TOOLS NOTES N.A.
C. INDUSTRY SUPPORT INFORMATION A replacement of the Rescue Hoist Assembly P/N 3G2591V01532 will be provided free of charge by Onboard Systems (formerly Goodrich) upon Customer’s request to Onboard Systems directly.
Contact Onboard Systems Customer Services below:
Onboard Systems, Hoist & Winch 3355 E. La Palma Ave. Dock 1 Anaheim, CA, 92806 USA E-Mail: HW-Custsupport@onboardsystems.com
S.B. N°109SP-167 ALERT DATE: December 2, 2024 REVISION: / Page 7 of 11
ONLY if Onboard Systems reject the request, please contact your Leonardo Helicopter CSAM sending the Vendor Ref. communication and the documents requested below:
i. a copy of the Log Card of the inspected Rescue Hoist Assembly P/N 3G2591V01532;
ii. a copy of the EASA Form 1, FAA Form 8130-3 or any other equivalent Authorised Release Certificate document of the inspected Rescue Hoist Assembly.
Only if confirmed by your Leonardo Helicopters’ CSAM, please Issue relevant MMIR form to your Warranty Administration Dpt. including the required documentation.
If the required documentation is not provided, the relevant MMIR will be rejected.
Owners/operators who comply with the instructions of this Service Bulletin no later than the applicable date in the “Compliance” section will be eligible to receive required materials on free of charge basis, except for Consumable Materials and Special Tools.
NOTE: Customers who fail to comply with the instructions in this Service Bulletin before the compliance date are not eligible for the aforementioned special policy.
NOTE: WRM will include RETURN MATERIAL AUTHORIZATION (RMA) number; the unit disembarked from the aircraft (Rescue Hoist Assembly P/N 3G2591V01532) has to be returned to LHD within thirty (30) calendar days after the shipment of the replacement part. In case of missing return within thirty (30) calendar days, Customer will be invoiced for the price of the replacement part (Rescue Hoist Assembly P/N 3G2591V01532).
S.B. N°109SP-167 ALERT DATE: December 2, 2024 Page 8 of 11 REVISION: /
3. ACCOMPLISHMENT INSTRUCTIONS
GENERAL NOTES
a) Place an identification tag on all components that are re-usable, including the attaching hardware that has been removed to gain access to the modification area and adequately protect them until their later reuse.
b) Shape the cables in order to prevent interference with the structure and the other existing installations, using where necessary suitable lacing cords and plastic cable tiedown.
c) During the installation of bonding braids or components requiring grounding, clean the surface structure in order to obtain a good ground contact.
1. In accordance with AMP DM 0B-A-00-20-00-00A-120A- A, prepare the helicopter on ground for a safe maintenance. Disconnect the battery, all electrical power sources and/or the external power supply.
2. In accordance with AMP DM 0B-A-06-41-00-00A-010A-A gain access to the area affected by the installation.
3. In accordance with AMP DM 0B-B-25-91-01-06A-520A-A, perform the removal of the Hoist Assembly.
NOTE Send the affected Hoist Assembly (either removed with step 3 or kept in stock) to Onboard Systems for modification according to Service Bulletin 44314-398-01.
S.B. N°109SP-167 ALERT DATE: December 2, 2024 REVISION: / Page 9 of 11 NOTE Hoist Assembly is defined as serviceable if:
A. It is NOT listed in Table 1 B. It is listed in Table 1 and meets one of the following conditions:
B.1 It is already compliant with Service Bulletin 44314-398-01 B.2 It is NOT already compliant with Service Bulletin 44314-398-01 and has NOT yet exceeded any of the limits detailed in paragraph 1.B Compliance.
Table 1 is displayed in paragraph 1.A Effectivity.
4. In accordance with AMP DM 0B-B-25-91-01-06A-720A- A, perform the installation of a serviceable Hoist Assembly.
5. Return the helicopter to flight configuration and record for compliance with this Service Bulletin on the helicopter logbook.
6. Gain access to My Communications section on Leonardo Customer Portal and compile the “Service - Technical Bulletin Application”.
As an alternative, send the attached compliance form to the following mail box:
engineering.support.lhd@leonardo.com and (for North, Central and South America) also to:
AWPC.Engineering.Support@leonardocompany.us
Non cancellare mai questo segnalibro Non cancellare mai interruzione sezione
K LEONARDO HELICOPTERS
1.50 ‡ 0.03 inch (38.1 ‡ 0.76 mm)
0.50 ‡ 0.03 inch ASB 44314-398-01
(12.7 ‡ 0.76 mm) DATE:[ 4X R
0.06 ‡ 0.03 inct
(1.5 ‡ 0.76 mm) NOTE: MAKE FROM 0.007 INCH THICK ACRYLATE (MATTE BLACK ON WHITE) WITH ADHESIVE BACK.
[RECOMMEND MAKE FROM 3M #7847 MATTE BLACK/WHITE ACRYLATE (STOCK # 70-0004-3110-9)] MAY BE PRODUCED USING LASER MARKING.
NOTE: CHARACTERS ARE TO BE IN CONTRASTING COLOR.
CHARACTER HEIGHTS AND LOACTIONS TO BE APPROXIMATELY AS SHOWN. BOX FOR DATE TO BE SOLID FOR HAND WRITTEN DATE AT TIME OF INSTALLATION.
Figure 1 S.B. N°109SP-167 ALERT DATE: December 2, 2024 Page 10 of 11 REVISION: /
Figure 2 S.B. N°109SP-167 ALERT DATE: December 2, 2024 REVISION: / Page 11 of 11
Remarks:
Information:
SERVICE BULLETIN COMPLIANCE FORM Date:
Number:
Revision:
Please send to the following address:
Telephone:
Fax:
B.T. Compliance Date:
Customer Name and Address:
Helicopter Model S/N Total Number Total Hours T.S.O.
LEONARDO S.p.A.
CUSTOMER SUPPORT & SERVICES - ITALY PRODUCT SUPPORT ENGINEERING & LICENSES DEPT.
Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) - ITALY Tel.: +39 0331 225036 Fax: +39 0331 225988 We request your cooperation in filling this form, in order to keep out statistical data relevant to aircraft configuration up-to-date. The form should be filled in all its parts and sent to the above address or you can communicate the application also via Technical Bulletin Application Communication Section placed in Leonardo AW Customer Portal - MyCommunications Area. We thank you beforehand for the information given.