Copy · Leonardo Helicopters ASB No. 109EP-174 · 7 pages

© Leonardo S.p.A. Filed by the FAA in regulations.gov docket FAA-2021-0695, the docket of AD 2021-22-10. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '11e53488038b410d454cfdfb83ff577c7d8c72a3f8a21e8a4d707794b358af74'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

N° 1 09EP-174 DAT E: January 20, 2021 REV. : / - March 15, 2017 Pag e 1 of 6 TITLE ATA 65 - REPLACEMENT OF TAIL ROTOR GEARBOX ASSY, 90-DEGREE P/ N 109-0440-01-115

REVISION LOG New Issue An appropriate entry should be made in the aircraft log book upon accomplishment.

If ownership of aircraft has changed, please, forward to new owner.

Leonardo S.p.A.

Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) Italy Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595 ALERT

SERVICE BULLETIN

S.B. N°109EP-174 ALERT DATE: January 20, 2021 Page 2 of 6 REVISION: /

1. PLANNING INFORMATION A. EFFECTIVITY All the Leonardo S.p.a A109E helicopters up to S/N 11160 currently equipped with tail ro tor gearbox assy, 90-degree P/N 109-0440-01-115.

B. COMPLIANCE  Helicopters that install a TGB P/N 109-0440-01-115 with less than 10000 FH since n ew and less than 3000 FH since new / last overhaul (whichever occurs last): within 50 FH or 6 months, whichever occurs first after the issuance of this SB, not exceeding the total amount of 3025 FH since new / last overhaul (whichever occur last), or 10025 FH since new.

 Helicopters that install a TGB P/N 109-0440-01-115 with 10000 FH or more since new or 3000 FH or more since new / last overhaul (whichever occurs last): within 25 FH or 3 months, whichever occurs first after the effective date of this SB.

C. CONCURRENT REQUIREMENTS N.A.

D. REASON This Service Bulletin is issued in order to provide the necessary instruction to replace th e tail rotor gearbox assy, 90-degree P/N 109-0440-01-115.

E. DESCRIPTION During the revision process of the A109E Technical Publications, it has been noticed th at the 90-Degree Gearbox P/N 109-0440-01-115 is included in the Illustrated Parts Catalogue (A109E-IPC) up to S/N 11160 and declared fully interchangeable with P/N 109-0440-01-119 or P/N 109-0440-01-121. The Tail Rotor Gearbox assy, 90-Degree P/N 109-0440-01-115 is not certified for the installation on the A109E model and consequently no overhaul limits are published in A109E AMPI Chapter 5.

It shall be noticed that the differences among Tail Rotor Gearbox assy, 90-Degree P/N 109-0440-01-115, 109-0440-01-119 and 109-0440-01-121 do not represent a concern for the operations. In order to ensure alignment with the Type Design data, LH decided to issue this SB to remove the 90-Degree Gearbox P/N 109-0440-01-115 that could have been installed as a replacement part of the original P/N 109-0440-01-119 from service and replace it with an applicable P/N (i.e. 109-0440-01-119, 109-0440-01-121

S.B. N°109EP-174 ALERT DATE: January 20, 2021 REVISION: / Page 3 of 6 or 109-0440-01-123; the last P/N has been recently added as a new alternative part number).

F. APPROVAL The technical content of this Service Bulletin is approved under the authority of DOA nr.

EA SA.21.J.005. For helicopters registered under other Aviation Authorities, before applying the Service Bulletin, applicable Aviation Authority approval must be checked within Leonardo Helicopters customer portal.

EASA states mandatory compliance with inspections, modifications or technical directives and related time of compliance by means of relevant Airworthiness Directives.

If an aircraft listed in the effectivity embodies a modification or repair not LHD certified and affecting the content of this Service Bulletin, it is responsibility of the Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on the aircraft, for any adaptation necessary before incorporation of the present Service Bulletin.

G. MANPOWER To comply with this Service Bulletin 12 (twelve) MMH are deemed necessary.

MM H are based on hands-on time and can change with personnel and facilities available.

H. WEIGHT AND BALANCE N.A.

I. REFERENCES

1) PUBLICATIONS

SECTION/PARAGRAPH DESCRIPTION PART DM01 00-20-1 Helicopter safety - DM02 65-21-6 90-degree gearbox removal/installation -

2) ACRONYMS DOA Design Organization Approval EA SA European Aviation Safety Agency IETP Interactive Electronic Technical Publications IPC Illustrated Parts Catalog LHD Leonardo Helicopters Division

S.B. N°109EP-174 ALERT DATE: January 20, 2021 Page 4 of 6 REVISION: / MM Maintenance Manual MMH Maintenance Man Hours P/N Part Number PTUM Pictorial Tools Usage Manual TGB Tail Gearbox

3) ANNEX N.A.

J. PUBLICATIONS AFFECTED A109E IPC Up to S/N 11600 – Illustrated Parts Catalog Up to S/N 11600 K. SOFTWARE ACCOMPLISHMENT SUMMARY N.A.

S.B. N°109EP-174 ALERT DATE: January 20, 2021 REVISION: / Page 5 of 6

2. MATERIAL INFORMATION A. REQUIRED MATERIALS

1) PARTS # P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTE LOG P/N 1 109-0440-01-119 109-0440-01-121 or 109-0440-01-123 Tail rotor gearbox assy, 90-degree 1 . - - Refer also to IPC for the spares materials required to comply with the MM Paragraphs referenced in the accomplishment instructions.

2) CONSUMABLES Re fer also to AMDI for the consumable materials required to comply with the MM Paragraphs referenced in the accomplishment instructions.

3) LOGISTIC MATRIX N.

A.

B. SPECIAL TOOLS Refer also to PTUM for the special tools required to comply with the MM Paragraphs re ferenced in the accomplishment instructions.

C. INDUSTRY SUPPORT INFORMATION WARRANTY: Owners/Operators who comply with the instructions of this Service Bu lletin no later than the applicable date in the “Compliance” section will be eligible to receive REQUIRED MATERIALS on free of charge basis, except for Consumable Materials and Special Tools.

NOTE: Customers who fail to comply with the instructions in this Service Bulletin before the compliance date are not eligible for the aforementioned special policy.

Please Issue relevant MMIR form to your Warranty Administration Dpt.

S.B. N°109EP-174 ALERT DATE: January 20, 2021 Page 6 of 6 REVISION: /

3. ACCOMPLISHMENT INSTRUCTIONS

GENERAL NOTES

a) Place an identification tag on all components that are re-usable, including the attaching hardware that has been removed to gain access to the modification area and adequately protect them until their later reuse.

1. In accordance with MM Paragraph 00-20-1, prepare th e helicopter on ground for a safe maintenance. Disconnect the battery, all electrical power sources and/or the external power supply.

NOTE The removed -115 gearbox can be reused on eligible helicopters providing that an overhaul has been accomplished.

2. In accordance with MM Paragraph 65-21-6 remove from the helicopter the tail rotor gearbox assy, 90-degree P/N 109-0440-01-115.

3. In accordance with MM Paragraph 65-21-6 install on the helicopter the tail rotor gearbox assy, 90-degree P/N 109-0440-01-119 or 109-0440-01-121 or 109-0440-01-123.

4. Return the helicopter to a ready to flight condition and record for compliance with this Service Bulletin on the helicopter logbook.

5. Send the attached compliance form to the following mail box:

engineering.support.lhd@leonardocompany.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.

Remarks:

Information:

SERVICE BULLETIN COMPLIANCE FORM Date:

Number:

Revision:

Please send to the following address:

Telephone:

Fax:

B.T. Compliance Date:

Customer Name and Address:

Helicopter Model S/N Total Number Total Hours T.S.O.

LEONARDO S.p.A.

CUSTOMER SUPPORT & SERVICES - ITALY PRODUCT SUPPORT ENGINEERING & LICENSES DEPT.

Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) - ITALY Tel.: +39 0331 225036 Fax: +39 0331 225988 We request your cooperation in filling this form, in order to keep out statistical data relevant to aircraft configuration up-to-date. The form should be filled in all its parts and sent to the above address or you can communicate the application also via Technical Bulletin Application Communication Section placed in Leonardo AW Customer Portal - MyCommunications Area. We thank you beforehand for the information given.