TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'a84488304ddb847d8fdbe6ef3b5e09021601238bd897e13806862d93075123f6' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'a84488304ddb847d8fdbe6ef3b5e09021601238bd897e13806862d93075123f6' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
N° 109SP-116 DA TE: September 8, 2017 REV. : /-March 3, 2017 Pa ge 1 of 14 TITLE ATA 62 – MAIN ROTOR BLADE TIP CAP, INSPECTION OF
REVISION LOG New Issue Leonardo S.p.A.
Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) Italy Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595 An appropriate entry should be made in the aircraft log book upon accomplishment.
If ownership of aircraft has changed, please, forward to new owner.
EMERGENCY ALERT
SERVICE BULLETIN
S.B. N°109SP-116 EMERGENCY ALERT DATE: September 8, 2017 Page 2 of 14 REVISION: /
1. PLANNING INFORMATION A. EFFECTIVITY Part I^:
All the AW109SP equipped with Main Rotor Blade P/N 709-0104-01-111 with a S/N listed in Table 1.
S/N S/N 1307 1414 1320 1426 1346 1436 1365 1475 1372 1485 1380 - TABLE 1 NOTE If any of the above Main Rotor Blade is in stock, please contact aw109.mbx.aw@leonardocompany.com to obtain information on how to handle the parts.
All the AW109SP equipped with Main Rotor Blade P/N 709-0104-01-111 with a S/N listed in Table 2, which has accumulated less than 400FH (Time Since New).
S/N S/N 1237 1410 1256 1415 1261 1417 1267 1419 1269 1420 1276 1421 1277 1422 1278 1424 1284 1432 1288 1434 1291 1435 1292 1437
S.B. N°109SP-116 EMERGENCY ALERT DATE: September 8, 2017 REVISION: / Page 3 of 14
S/N S/N 1294 1438 1303 1439 1306 1441 1314 1442 1316 1446 1318 1450 1324 1460 1341 1461 1342 1462 1345 1471 1347 1472 1357 1473 1366 1474 1370 1478 1374 1479 1375 1483 1377 1484 1381 1486 1383 1490 1387 1495 1391 1505 1392 1506 1396 1508 1402 1511 1403 1513 1406 1516 TABLE 2 NOTE If any of the above Main Rotor Blade is in stock, please contact aw109.mbx.aw@leonardocompany.com to obtain information on how to handle the parts.
All the AW109SP, equipped with Main Rotor Blade P/N 709-0104-01-111 with a S/N listed in Table 3, which have accumulated less than 400 FH from repair.
S.B. N°109SP-116 EMERGENCY ALERT DATE: September 8, 2017 Page 4 of 14 REVISION: /
S/N S/N P451 Q695 P460 Q832 Q553 R2080 Q557 R2212 Q587 V699 TABLE 3 NOTE If any of the above Main Rotor Blade is in stock, please contact aw109.mbx.aw@leonardocompany.com to obtain information on how to handle the parts.
Part II^:
All the AW109SP equipped with Main Rotor Blade P/N 709-0104-01-111 with a S/N listed in Table 1.
B. COMPLIANCE Part I^:
for the AW109SP installing a Main Rotor Blade with a S/N included in Table 1, within and not later than 5 (five) flight hours since the date of issuance of this Service Bulletin and subsequently each 5 (five) flight hours;
for the AW109SP installing a Main Rotor Blade with a S/N included in Table 2 or 3, within and not later than 25 (twenty five) flight hours since the date of issuance of this Service Bulletin and subsequently each 25 (twenty five) flight hours.
NOTE The accomplishment of the scheduled inspection at 200 FH as per Maintenance Manual DM 0B-A-62-11- 00-00A-281A-A can be considered equivalent to the compliance with Part I of this Service Bulletin.
P art II^:
within and not later than 25 (twenty five) flight hours since date of issuance of this Service Bulletin.
S.B. N°109SP-116 EMERGENCY ALERT DATE: September 8, 2017 REVISION: / Page 5 of 14 C. CONCURRENT REQUIREMENTS N.A.
D. REASON This Service Bulletin is issued in order to provide the necessary instruction to perform a repetitive inspection of the tip cap installed on a defined batch of main rotor blades P/N 709-0104-01-111 to detect potential debonding.
E. DESCRIPTION A case of debonding of the tip cap P/N 709-0104-10-109 from the main rotor blade P/N 709-0104-01-111 has been reported on an AW109SP helicopter, this resulting in the loss of the tip cap in flight. This event did not compromise the conduct of flight.
The investigation has individuated as cause of the occurrence an incorrect bonding procedure during the manufacturing of some main rotor blades.
Leonardo Helicopters, so, identified all the blades potentially affected by this defect and issue this Service Bulletin to perform a short scheduled tapping test (Part I^) and to require the replacement of these main rotor blades (Part II^). As a precautionary measure, the same tapping test, but with a longer schedule, is also required on all the blades manufactured in the same period of the potentially affected ones, until they reach 400FH.
F. APPROVAL The content of this Service Bulletin is approved under the authority of DOA nr.
EASA.21.J.005. For helicopters registered under other Aviation Authorities, before applying the Service Bulletin, applicable Aviation Authority approval must be checked within Leonardo Helicopters customer portal.
E.A.S.A. states mandatory compliance with inspections, modifications or technical directives and related time of compliance by means of relevant Airworthiness Directives.
If a helicopter listed in the effectivity embodies a modification or repair not LHD certified and affecting the content of this Service Bulletin, it is responsibility of the Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on the aircraft, for any adaptation necessary before incorporation of the present Service Bulletin.
S.B. N°109SP-116 EMERGENCY ALERT DATE: September 8, 2017 Page 6 of 14 REVISION: / G. MANPOWER To comply with this Service Bulletin the following Maintenance-Man-Hours are deemed necessary:
Part I^: approximately one (1) MMH;
Part II^: approximately four (4) MMH – per blade.
Maintenance-Man-Hours are based on hands-on time and can change with personnel and facilities available.
H. WEIGHT AND BALANCE N.A.
I. REFERENCES
1) PUBLICATIONS
DATA MODULE DESCRIPTION DM01 0B-A-00-20-00-00A-120A-A Helicopter on ground for a safe maintenance.
DM02 0B-A-62-11-00-00A-281A-A Main rotor blade installation Scheduled inspections DM03 0B-A-62-11-01-00A-520A-A Main rotor blade - Remove procedures DM04 0B-A-62-11-01-00A-720A-A Main rotor blade - Install procedures
2) ACRONYMS DOA Design Organization Approval DM Data Module EASA European Aviation Safety Agency LHD Leonardo Helicopter Division N.A. Not Applicable MMIR Maintenance Malfunction Information Report P/N Part Number SB Service Bulletin S/N Serial Number
3) ANNEX Annex A Hammer Tapping Inspection AW109 Tip-Cap.
J. PUBLICATIONS AFFECTED N.A.
S.B. N°109SP-116 EMERGENCY ALERT DATE: September 8, 2017 REVISION: / Page 7 of 14 K. SOFTWARE ACCOMPLISHMENT SUMMARY N.A.
S.B. N°109SP-116 EMERGENCY ALERT DATE: September 8, 2017 Page 8 of 14 REVISION: /
2. MATERIAL INFORMATION A. REQUIRED MATERIALS
1) PARTS PART I^ N.A.
PART II^ P/N DESCRIPTION Q.TY NOTE 709-0104-01-111 Main rotor blade AR
2) CONSUMABLES N.A.
B. SPECIAL TOOLS P/N DESCRIPTION Q.TY NOTE PART 109-3101-58-1 or equivalent Tapping hammer (steel head) 1 I^
C. INDUSTRY SUPPORT INFORMATION WARRANTY: Owners/Operators who comply with the instructions of this Service Bulletin no later than the applicable date in the “Compliance” section will be eligible to receive REQUIRED MATERIALS on free of charge basis, except for Consumable Materials and Special Tools.
NOTE: Customers who fail to comply with the instructions in this Service Bulletin before the compliance date are not eligible for the aforementioned special policy.
Please Issue relevant MMIR form to your Warranty Administration Dpt.
NOTE: WRM will include RETURN MATERIAL AUTHORIZATION (RMA) number; the unit disembarked (P/N 709-0104-01-111 Main Rotor Blade) from the aircraft has to be returned to LHD within thirty (30) calendar days after the shipment of the replacement part. In case of missing return within thirty (30) calendar days, Customer will be invoiced for the price of the replacement part.
NOTE: The S/N and INSPECTION REPORT are mandatory; in case the MMIR is not accompanied by these documents, it will be rejected.
S.B. N°109SP-116 EMERGENCY ALERT DATE: September 8, 2017 REVISION: / Page 9 of 14
3. ACCOMPLISHMENT INSTRUCTIONS PART I^
1. In accordance with DM 0B-A-00-20-00-00A-120A-A, prepare the helicopter on ground for a safe maintenance.
2. Gain access to the main rotor blades P/N 709-0104-01-111.
NOTE The authorized personnel who will carry out the test must comply with the requirements listed in Annex A.
3. Perform a tapping test in accordance with Annex A on the Main Rotor Blade area identified in Figure 1.
4. In case no debonding is found, proceed with step 6.
5. In case debonding is found, check its dimensions with DM 0B-A-62-11-00-00A-281A-A (debonding limits).
5.1 In case debonding is found within acceptable limits proceed with step 6.
5.2 In case debonding is found outside the acceptable limits, before next flight apply Part II^ of this Service Bulletin and contact Leonardo Helicopters Spa Customer Support at the following mail box:
aw109.mbx.aw@leonardocompany.com
6. Return the helicopter to a ready to flight configuration and record for compliance with Part I^ of this Service Bulletin on the Main Rotor Blade log card.
7. Send the attached compliance form to the following mail box:
aw109.mbx.aw@leonardocompany.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.
S.B. N°109SP-116 EMERGENCY ALERT DATE: September 8, 2017 Page 10 of 14 REVISION: / PART II^
1. Prepare the helicopter on ground for a safe maintenance, in accordance with DM 0B-A-00-20-00-00A-120A-A.
2. Replace the affected Main Rotor Blade P/N 709-0104-01-111 with another having a S/N not listed in the Table 1 (ref EFFECTIVITY paragraph) in accordance with DM 0B-A-62-11-01-00A-520A-A (removal procedures) and DM 0B-A-62-11-01-00A- 720A-A (install procedures).
NOTE Please contact aw109.mbx.aw@leonardocompany.com to obtain information on how to handle the removed blade.
3. Return the helicopter to a ready to flight config uration and record for compliance with Part II^ of this Service Bulletin on the helicopter logbook.
4. Send the attached compliance form to the following mail box:
aw109.mbx.aw@leonardocompany.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.
K LEONARDO
HELICOPTERS
SIA STA STA 5200 5280 5630 25 mm
TIP CAP
EROSION SHIELD 115 mm
TOP SURFACE 80 mm TIF CAP Tapping hammer area TRAILING EDGE
BOTTOM SURFACE
TIP CAP
EROSION SHIELD AREA A (Between Tip Cap and Blade body) AREA B (Between Tip Cap and Blade body) Tapping area of both upper and lower sides Figure 1 S.B. N°109SP-116 EMERGENCY ALERT DATE: September 8, 2017 REVISION: / Page 11 of 14
S.B. N°109SP-116 EMERGENCY ALERT DATE: September 8, 2017 Page 12 of 14 REVISION: /