TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '6812017ee8d5d1092cd0621752f4dbba60957075653484af4f132e7e3854ea52' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '6812017ee8d5d1092cd0621752f4dbba60957075653484af4f132e7e3854ea52' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
N° 139-520 DATE: April 26, 2018 REV. : / - March 3, 2017 Page 1 of 11 TITLE ATA 62 - MAIN ROTOR BLADE TIP CAP RECURRENT INSPECTION
REVISION LOG New Issue An appropriate entry should be made in the aircraft log book upon accomplishment.
If ownership of aircraft has changed, please, forward to new owner.
Leonardo S.p.A.
Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) Italy Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595 ALERT
SERVICE BULLETIN
S.B. N°139-520 ALERT DATE: April 26, 2018 Page 2 of 11 REVISION: /
1. PLANNING INFORMATION A. EFFECTIVITY AB139/AW139 helicopters equipped with MRB P/N 3G6210A00131 having S/N listed in Table 1 and having logged less than 1200 FH since new.
NOTE This Service Bulletin is not applicable to MRB whose tip cap has been replaced after the date of issuance of this Service Bulletin.
MRB S/N 2709 3558 3624 3707 3790 3486 3561 3625 3717 3795 3488 3569 3626 3720 3798 3495 3570 3627 3725 3803 3500 3574 3628 3726 3807 3501 3575 3633 3734 3812 3502 3582 3636 3735 3822 3503 3583 3638 3738 3824 3508 3586 3642 3739 3825 3510 3590 3648 3741 3827 3513 3592 3649 3743 3831 3520 3595 3650 3744 3832 3527 3597 3651 3745 3838 3528 3599 3657 3753 3841 3529 3602 3665 3754 3842 3531 3603 3672 3761 3847 3536 3605 3682 3766 3850 3539 3609 3684 3770 3851 3544 3612 3686 3771 3852 3549 3613 3690 3777 3853 3551 3616 3691 3783 3854 3556 3620 3695 3788 3855 3557 3622 3696 3789 TABLE 1 B. COMPLIANCE Within fifty (50) flight hours since the date of issuance of this Service Bulletin and then every fifty (50) FH until the MRB reaches twelve hundred (1200) FH since new, if no debondings are found;
S.B. N°139-520 ALERT DATE: April 26, 2018 REVISION: / Page 3 of 11 every ten (10) FH until the MRB reaches twelve hundred (1200) FH since new, starting from when debondings within the limits are found.
Tip cap installation or replacement on affected blades, performed before the MRB reaches 1200 FH, is considered as a terminating action of this Service Bulletin.
C. CONCURRENT REQUIREMENTS N.A.
D. REASON This Service Bulletin is issued in order to prescribe the inspection of the tip cap installed on a defined batches of MRB P/N 3G6210A00131, in order to detect potential debonding.
E. DESCRIPTION Further investigation performed after the issuance of Service Bulletin 139 -508 has identified an additional batch o f potentially affected MRB. This Service Bulletin prescribes a periodic tapping check on the MRB of this batch, until they reach 1200 FH and, depending on findings, the replacement of the component.
For the affected MRB revealing debonding above the permitted limits, the removal and new installation of the tip cap is a terminating action of this Service Bulletin.
F. APPROVAL The technical content of this Service Bulletin is approved under the authority of DOA nr. EASA.21.J.005. For helicopters registered under other Aviation Authorities, before applying the Service Bulletin, applicable Aviation Authority approval must be checked within Leonardo Helicopters customer portal.
EASA states mandatory compliance with inspections, modifications or technical directives and related time of compliance by means of relevant Airworthiness Directives.
If an aircraft listed in the effectivity embodies a modification or repair not LHD certified and affecting the content of this Service Bulletin, it is responsibility of the Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on the aircraft, for any adaptation necessary before incorporation of the present Service Bulletin.
S.B. N°139-520 ALERT DATE: April 26, 2018 Page 4 of 11 REVISION: / G. MANPOWER To comply with this Service Bulletin approximately one (1) MMH is deemed necessary.
MMH are based on hands-on time and can change with personnel and facilities available.
H. WEIGHT AND BALANCE N.A.
I. REFERENCES
1) PUBLICATIONS
DATA MODULE DESCRIPTION PART DM01 39-A-00-20-00-00A-120A-A Helicopter on ground for a safe maintenance / DM02 39-A-62-11-01-00A-520A-A Main rotor blade - Remove procedures / DM03 39-A-62-11-01-00A-720A-A Main rotor blade - Install procedures / DM04 39-A-GF-05-00-00A-066A-A Hammer (steel) MR and TR blades tapping insp. (GF-05-00) / DM05 39-A-GF-06-00-00A-066A-A Hammer (alum) MR and TR blades tapping insp. (GF-06-00) / DM06 39-A-62-11-01-00A-66AC-B Main rotor blade - Superficial damage - Repair procedure /
2) ACRONYMS AMP Aircraft Maintenance Publication DOA Design Organization Approval DM Data Module EASA European Aviation Safety Agency FH Flight Hours ITEP Illustrated Tools and Equipment Publication LHD Leonardo Helicopter Division LS Local Supply MMH Maintenance-Man-Hours MMIR Maintenance Malfunction Information Report MR Main Rotor MRB Main Rotor Blade TR Tail Rotor WRM Warranty Reply Memo
S.B. N°139-520 ALERT DATE: April 26, 2018 REVISION: / Page 5 of 11
3) ANNEX Annex A Hammer Tapping Inspection - AW139 Tip-Cap J. PUBLICATIONS AFFECTED N.A.
K. SOFTWARE ACCOMPLISHMENT SUMMARY N.A.
S.B. N°139-520 ALERT DATE: April 26, 2018 Page 6 of 11 REVISION: /
2. MATERIAL INFORMATION A. REQUIRED MATERIALS
1) PARTS N.A.
2) CONSUMABLES The following consumable materials, or equivalent, are necessary to accomplish this Service Bulletin:
# Spec./LHD code number DESCRIPTION Q.TY NOTE PART 1 Commercial Lint-free cloth (C011) AR LS / 2 MIL-PRF-680C, Type II Cleaning solvent (C010) AR LS / 3 MIL-C-25769H Cleaning compound (C018) AR LS /
3) LOGISTIC MATRIX N.A.
B. SPECIAL TOOLS The following special tools, or equivalent, are necessary to accomplish this Service Bulletin:
# P/N DESCRIPTION Q.TY NOTE PART 4 RMGE-DS-06-2010-LH Platform left (GG-01-00) 1 LS / 5 109-3101-58-1 or 109-3101-58-2 or equivalent Tapping hammer (GF-05-00) or (GF-06-00) 1 LS / C. INDUSTRY SUPPORT INFORMATION WARRANTY: Owners/Operators who comply with the instructions of this Service Bulletin no later than the applicable limit in the “Compliance” section will be eligible to receive MRB P/N 3G6210A00131 (if found out of acceptable limits) on free of charge basis, except for Consumable Materials and Special Tools.
NOTE: Customers who fail to comply with the instructions in this Service Bulletin before the compliance time are not eligible for the aforementioned special policy.
Please Issue relevant MMIR form to your Warranty Administration Dpt.
NOTE: WRM will include RETURN MATERIAL AUTHORIZATION (RMA) number; the unit disembarked (P/N 3G6210A00131 MRB) from the aircraft has to be returned to LHD within thirty (30) calendar days after the shipment of the replacement part. In case of missing return within thirty (30) calendar days, Customer will be invoiced for the price of the replacement part.
NOTE: The S/N and INSPECTION REPORT are mandatory; in case the MMIR is not accompanied by these documents, it will be rejected.
S.B. N°139-520 ALERT DATE: April 26, 2018 REVISION: / Page 7 of 11
3. ACCOMPLISHMENT INSTRUCTIONS
1. In accordance with AMP DM 39-A-00-20-00-00A-120A-A, prepare the helicopter on ground for a safe maintenance. Disconnect the battery, all electrical power sources and/or the external power supply.
2. Put the platform (GG- 01-00), or an approved alternative, adjacent to the left side of the fuselage and gain access to the affected MRB P/N 3G6210A00131.
WARNING
THE HAMMER TAPPING INSPECTION MUST BE
PERFORMED ONLY BY APPROPRIATELY
QUALIFIED PERSONNEL IN ACCORDANCE WITH THE NATIONAL AVIATION REGULATION.
3. Perform the tip cap inspection as described below:
3.1 In accordance with Annex A and with reference to Figure 1, perform a tapping test on the tip cap area between STA 6300 and STA 6400.
3.2 In case no debonding is found, proceed with step 3.6.
3.3 In case debonding is found, mark the contour of the damaged area with an applicable marking pen and compare the marked area with the limits provided in Annex A.
3.4 If the debonding area is within the limits, update the inspection scheduling in accordance with the “Compliance” section and proceed with step 3.6.
3.5 If the debonding area is not within the permitted limits, replace the affected MRB according to AMP DM 39 -A-62-11-01-00A-520A-A and DM 39 -A-62-11-01-00A- 720A-A. Record reason of removal on the MRB logcard and send the MRB you have removed to LHD for tip cap removal and new installation
3.6 Repeat steps 3.1 thru 3.5 until you have inspected all the affected MRB.
4. Remove the platform (GG- 01-00) from the left side of the fuselage.
5. Return the helicopter to flight configuration and record for compliance with this Service Bulletin on the helicopter logbook.
6. Send the attached compliance form to the following mail box:
cse.aw139.aw@leonardocompany.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.
≤ LEONARDO
HELICOPTERS
LEADING EDGE EROSION EROSION
FAIRING HONEYCOMB CORE SHIELD SHIELD
COVER LIGHTNING BONDING STRIP SPAR LEADING EDGE
TRAILING A TIP
FAIRING TRAILING EDGE EDGE TRIM TAB TRIM TAB CAP
VOIDS NOT AREA 1 PERMITTED IN 50 mm (1.97 in) SPANWISE THIS AREA 80 mm (3.15 in) CHORDWISE COVER STA 6300 STA 6400
HAMMER TAPPING IS REQUIRED
ON BOTH UPPER AND LOWER SIDES
AND NOSE OF THE BLADE Figure 1 S.B. N°139-520 ALERT DATE: April 26, 2018 Page 8 of 11 REVISION: /
ANNEX A S.B. N°139-520 ALERT DATE: April 26, 2018 REVISION: / Page 9 of 11
ANNEX A
HAMMER TAPPING INSPECTION AW139 TIP-CAP
ANNEX A S.B. N°139-520 ALERT DATE: April 26, 2018 Page 10 of 11 REVISION: /
SPECIFIC REQUIREMENTS OF INSPECTION Carry out hammer tapping inspection with hammer P/N 109-3101-58-1 or P/N 109-3101- 58-2 of both upper and lower sides and nose of the blade, between STA6300 and STA 6400, to detect potential debonding.
GENERAL REQUIREMENTS
WARNING
THE HAMMER TAPPING INSPECTION MUST BE
PERFORMED ONLY BY APPROPRIATELY
QUALIFIED PERSONNEL IN ACCORDANCE WITH THE NATIONAL AVIATION REGULATION.
1 HAMMER TAPPING The hammer shall comply with the requirements of P/N 109- 3101-58-1 (steel hammer, GF- 05-00) or P/N 109- 3101-58-2 (aluminium hammer, GF- 06-00). Refer to ITEP DM 39-A- GF- 05-00-00A-066A-A and DM 39-A-GF-06-00-00A-066A-A.
2 PROCEDURE
2.1 Clean the tip cap following the instructions below:
2.1.1 Clean the tip cap with the cloth (C011) and the cleaning solvent (C010).
2.1.2 Wash the tip cap with the cleaning compound (C018).
2.1.3 Rinse the tip cap with water.
2.1.4 Dry the tip cap with the compressed air.
2.2 With reference to Figure 1 detail A, do the inspection of the tip cap bonded area for debonding by impacting the component and performing a subjective evaluation of the emitted sound.
Tapping shall be performed from a height of 25 mm to 40 mm from the surface without causing dents on the area being inspected, by moving smoothly along the direction of test and complying with the grid of 3 mm maximum.
Tap on bends and edges with the conical side of the Tap hammer, while Tap on the flat areas with the rounded side of the Tap hammer.
Tapping shall be performed with the minimum energy necessary to generate a clear and audible sound and repeatable with the same intensity.
The inspection shall be performed in a quiet environment. The maximum level of noise (sum of the environmental noise with the noise due to the tapping inspection) should not exceed 80dB, as stated by the health protection rules. The noise level
ANNEX A S.B. N°139-520 ALERT DATE: April 26, 2018 REVISION: / Page 11 of 11 due to the tapping inspection shall be at least 5dB higher than the environmental noise without the tapping.
NOTE With 'VOIDS' we identify the not bonded area between the surfaces of a component. The primary causes are:
unwanted materials between the surface and the adhesive, air bubbles, missing adhesive and other damage.
2.3 Voids between the tip cap and the blade body, from STA 6300 to STA 6400, are not permitted, except in AREA 1.
2.4 In AREA 1 (top and bottom side) voids between the tip erosion shield and the blade body and each of a maximum area of 10 cm 2 (1.55 in 2) are permitted. The total void area, in AREA 1 (top + bottom side), must not be more than 10 cm2 (1.55 in2).
Remarks:
Information:
SERVICE BULLETIN COMPLIANCE FORM Date:
Number:
Revision:
Please send to the following address:
Telephone:
Fax:
B.T. Compliance Date:
Customer Name and Address:
Helicopter Model S/N Total Number Total Hours T.S.O.
LEONARDO S.p.A.
CUSTOMER SUPPORT & SERVICES - ITALY PRODUCT SUPPORT ENGINEERING & LICENSES DEPT.
Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) - ITALY Tel.: +39 0331 225036 Fax: +39 0331 225988 We request your cooperation in filling this form, in order to keep out statistical data relevant to aircraft configuration up-to-date. The form should be filled in all its parts and sent to the above address or you can communicate the application also via Technical Bulletin Application Communication Section placed in Leonardo AW Customer Portal - MyCommunications Area. We thank you beforehand for the information given.