TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'fff94ae6dff08c581068186921878a3075ef9b202f0b48dd1e9e5d578a1c0af0' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'fff94ae6dff08c581068186921878a3075ef9b202f0b48dd1e9e5d578a1c0af0' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
N° 139-569 DA TE: December 28, 2018 REV. : / - March 15, 2017 Pa ge 1 of 12 TITLE ATA 64 – TAIL ROTOR SLIDER ASSY DETAILED INSPECTION
REVISION LOG First Issue An appropriate entry should be made in the aircraft log book upon accomplishment.
If ownership of aircraft has changed, please, forward to new owner.
Leonardo S.p.A.
Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) Italy Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595 ALERT
SERVICE BULLETIN
S.B. N°139-569 ALERT DATE: December 28, 2018 Page 2 of 12 REVISION: /
1. PLANNING INFORMATION A. EFFECTIVITY All AB139/AW139 helicopters.
B. COMPLIANCE PART I
• Within fifty (50) FH if the slider assy has already logged more than twenty-four-hundred (2400) FH at the issue date of this Service Bulletin.
• Before exceeding twenty-four-hundred-and-fifty (2450) FH if the slider assy has NOT logged more than twenty-four-hundred (2400) FH at the issue date of this Service Bulletin.
• Every one (1) year after first accomplishment of Part I, only if during the inspection signs of refinishing are found.
PART II Immediately after compliance with Part I, if evidence of corrosion is found during the inspection.
C. CONCURRENT REQUIREMENTS N.A.
D. REASON This Service Bulletin is issued in order to require the inspection of the slider assembly on the tail rotor.
E. DESCRIPTION Following a reported occurrence of Tail Rotor Slider found cracked on an AW139 helicopter after landing, this Service Bulletin requires a detailed inspection of the slider assembly P/N 3G6430A00131 for corrosion and mechanical damage and, depending on findings, the replacement of the part.
In particular, the investigation on the cracked slider highlighted presence of corrosion craters on its surface, originated along finishing signs compatible with low grit sanding operations, possibly generated from a maintenance activity not allowed in service.
This condition, if not detected and corrected, could lead to the breakage of the slider.
S.B. N°139-569 ALERT DATE: December 28, 2018 REVISION: / Page 3 of 12 F. APPROVAL The technical content of this Service Bulletin is approved under the authority of DOA nr. EASA.21.J.005. For helicopters registered under other Aviation Authorities, before applying the Service Bulletin, applicable Aviation Authority approval must be checked within Leonardo Helicopters customer portal.
EASA states mandatory compliance with inspections, modifications or technical directives and related time of compliance by means of relevant Airworthiness Directives.
If an aircraft listed in the effectivity embodies a modification or repair not LHD certified and affecting the content of this Service Bulletin, it is responsibility of the Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on the aircraft, for any adaptation necessary before incorporation of the present Service Bulletin.
G. MANPOWER To comply with this Service Bulletin the following MMH are deemed necessary:
Part I: approximately one (1) MMH.
Part II:
• approximately four (4) MMH, if tool kit P/N 3G6405G04032 is NOT available at Customer’s facilities.
• approximately ten (10) MMH, if tool kit P/N 3G6405G04032 is available at Customer’s facilities.
MMH are based on hands-on time and can change with personnel and facilities available.
H. WEIGHT AND BALANCE N.A.
I. REFERENCES
1) PUBLICATIONS
DATA MODULE DESCRIPTION PART DM01 39-A-00-20-00-00A-120A-A Helicopter on ground for a safe maintenance.
I DM02 39-A-64-31-04-00A-520A-A Sliding control assembly - Remove procedure II DM03 39-A-64-31-04-00A-720A-A Sliding control assembly - Install procedure II
S.B. N°139-569 ALERT DATE: December 28, 2018 Page 4 of 12 REVISION: /
DATA MODULE DESCRIPTION PART DM04 39-A-60-10-00-01A-251A-D Disassembled metal components (vapor degreasing) - Clean with chemical agent I DM05 39-A-64-31-04-01A-921A-B Duplex bearing (sliding control assembly) - Replacement (remove and install a new item) II
2) ACRONYMS AMDI Aircraft Material Data Information AMP Aircraft Maintenance Publication DM Data Module DOA Design Organization Approval EASA European Aviation Safety Agency FH Flight Hours ITEP Illustrated Tools and Equipment Publication LHD Leonardo Helicopter Division MMH Maintenance Man Hours MMIR Maintenance Malfunction Information Report SB Service Bulletin TR Tail Rotor WRM Warranty Reply Memo
3) ANNEX N.A.
J. PUBLICATIONS AFFECTED AW139 AMP K. SOFTWARE ACCOMPLISHMENT SUMMARY N.A.
S.B. N°139-569 ALERT DATE: December 28, 2018 REVISION: / Page 5 of 12
2. MATERIAL INFORMATION A. REQUIRED MATERIALS
1) PARTS PART I N.A.
PART II # P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTE LOG P/N 1 3G6430A02531 3G6430A01931 Sliding control assy 1 . (1) -
2) CONSUMABLES The following consumable materials, or equivalent, are necessary to accomplish this Service Bulletin:
# Spec./LHD code number DESCRIPTION Q.TY NOTE PART 2 Commercial Gloves AR (2) I, II 3 MS20995C32 Lockwire AR (2) (3) I, II 4 A629A02UV or AW001CK02UV Strap tiedown AR (2) (3) I, II
Refer also to AMDI for the consumable materials required to comply with the AMP DM referenced in the accomplishment instructions.
3) LOGISTIC MATRIX N.A.
NOTE
(1) Spider and slider assy P/N 3G6430A01931 is a valid alternative to sliding control assy P/N 3G6430A02531, only if tool kit P/N 3G6405G04032 is already available at Customer’s facilities.
(2) Item to be procured as local supply.
(3) To be procured if already installed on TR boot.
B. SPECIAL TOOLS The following special tools, or equivalent, are necessary to accomplish this Service Bulletin:
# P/N DESCRIPTION Q.TY NOTE PART 5 Commercial Magnifying glass (10 power) 1 (B1) I 6 Commercial Light source (fluorescent) / Flashlight 1 (B1) I 7 RMGE-DS-06-2010-RH Deck servicing platform, RH 1 (B1) I, II
S.B. N°139-569 ALERT DATE: December 28, 2018 Page 6 of 12 REVISION: / Refer also to ITEP for the special tools required to comply with the AMP DM referenced in the accomplishment instructions.
SPECIAL TOOLS NOTE Item to be procured a local supply. (B1) C. INDUSTRY SUPPORT INFORMATION WARRANTY: Owners/Operators who comply with the instructions of this Service Bulletin no later than the applicable date in the “Compliance” section will be eligible to receive necessary replacements on free of charge basis, except for Consumable Materials and Special Tools.
NOTE: Customers who fail to comply with the instructions in this Service Bulletin before the compliance date are not eligible for the aforementioned special policy.
Please Issue relevant MMIR form to your Warranty Administration Dpt.
NOTE: WRM will include RETURN MATERIAL AUTHORIZATION (RMA) number; the unit disembarked from the aircraft has to be returned to LHD within thirty (30) calendar days after the shipment of the replacement part. In case of missing return within thirty
(30) calendar days, Customer will be invoiced for the price of the replacement part.
S.B. N°139-569 ALERT DATE: December 28, 2018 REVISION: / Page 7 of 12
3. ACCOMPLISHMENT INSTRUCTIONS
GENERAL NOTES Place an identification tag on all components that are re-usable, including the attaching hardware that has been removed to gain access to the modification area and adequately protect them until their later re-use.
PART I
1. In accordance with AMP DM 39-A-00-20-00-00A-120A-A, prepare the helicopter on ground for a safe maintenance. Disconnect the battery, all electrical power sources and/or the external power supply.
2. Put the Platform (GG-02-00), or an approved alternative, adjacent to the right side of the fuselage.
3. With reference to Figure 1, get access to the TR, remove the installed tiedown strap or lockwire and move the boot to expose the interested area.
4. With reference to Figures 2 and 3, perform the check on slider assembly for corrosion damage and signs of surface imperfections from refinishing, as described in the following procedure:
NOTE When you examine the slider assy, use the magnifying glass (10 power) and, where necessary, the flashlight.
4.1 In accordance with AMP DM 39-A-60-10-00-01A-251A -D, clean the slider base.
4.2 With reference to Figures 2 and 3, identify on the slider base the involved areas and compare their finishing with the one shown in Details C1, C2, D1, D2 and E.
Details C1, C2, D1, D2 and E show evidence of refinishing with improper abrasives and corrosion.
4.3 If evidences of corrosion craters are found as per Figures 2 and 3, perform Part II to replace the slider assembly with a serviceable part. In case of doubt contact Product Support Engineering (cse.aw139.aw@leonardocompany.com).
4 .4 If evidences of corrosion are not found and evidences of refinishing signs are found, update the maintenance schedule to plan the next inspection according to paragraph “COMPLIANCE” (Part I).
4.5 If no corrosion and no refinishing signs are found, no further action is required.
5. With reference to Figure 1, move the boot in the right position on the slider assy and install the tiedown strap or lockwire.
6. Remove the platform from the right side of the fuselage.
7. Return the helicopter to flight configuration and record for compliance with Part I of this
S.B. N°139-569 ALERT DATE: December 28, 2018 Page 8 of 12 REVISION: / Service Bulletin on the helicopter logbook.
8. Send the attached compliance form to the following mail box:
cse.aw139.aw@leonardocompany.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.
S.B. N°139-569 ALERT DATE: December 28, 2018 REVISION: / Page 9 of 12
PART II
1. In accordance with AMP DM 39-A-64-31-04-00A-520A-A, remove the sliding control assembly from the helicopter.
NOTE Perform the following step 2, if tool kit P/N 3G6405G04032 is NOT available at Customer’s facilities.
2. Send the sliding control assy P/N 3G6430A02531 r emoved in previous step 1 to LHD.
NOTE Perform the following steps 3 thru 5, only if tool kit P/N 3G6405G04032 is available at Customer’s facilities.
3. In accordance with AMP DM 39-A-64-31-04-01A-921A- B, perform the applicable steps to remove the duplex bearing from the sliding control assembly and keep it for later re-use.
4. Send the spider and slider assy P/N 3G6430A01931 removed in previous step 3 to LHD.
NOTE A serviceable part is a component that is new (never installed on a helicopter); or a component that, before installation, has passed the visual inspection (no defects detected) in accordance with the instructions of Part I of this SB.
5. In accordance with AMP DM 39-A-64-31-04-01A-921A- B, perform the applicable steps to reinstall the duplex bearing on the spider and slider assy.
6. In accordance with AMP DM 39-A-64-31-04-00A-720A-A install a serviceable sliding control assembly on the helicopter.
7. Return the helicopter to flight configuration and record for compliance with Part II of this Service Bulletin on the helicopter logbook.
8. Send the attached compliance form to the following mail box:
cse.aw139.aw@leonardocompany.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.
Figure 1 S.B. N°139-569 ALERT DATE: December 28, 2018 Page 10 of 12 REVISION: /
TR□BOOT A629A02UV TIEDOWN□STRAP (REF) OR MS20995C32□LOCKWIRE□(REF) RESTORE AFTER□INSPECTION VIEW A TR□SCISSORS□REMOVAL IS□NOT REQUIRED TO□PERFORM THE□INSPECTION
: LEONARDO
HELICOPTERS DETAIL D1 ZO7150 DETAIL E DETAIL D1 Details of some corroded areas of the Slider base. The corrosion craters tend to originate along finishing signs compatible with sanding operations.
DETAIL E 3G6430A00131 SLIDER ASSY Figure 2 S.B. N°139-569 ALERT DATE: December 28, 2018 REVISION: / Page 11 of 12
: LEONARDO
HELICOPTERS DETAIL C2 DETAIL C1 DETAIL C1 Details of some corroded areas of the Slider base. The corrosion craters tend to originate along finishing signs compatible with sanding operations. DETAIL C2 3G6430A00131 SLIDER ASSY Figure 3 S.B. N°139-569 ALERT Page 12 of 12