TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'f1fb8cb6d75a51b36241ec133a50216d67a39ca4b58027c1903e497cfb61b73c' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'f1fb8cb6d75a51b36241ec133a50216d67a39ca4b58027c1903e497cfb61b73c' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
N ° 139-648 D ATE: August 10, 2020 REV. : /Fare clic qui per P age 1 of 17 TITLE ATA 25 – LIFERAFT RESERVOIR INSPECTION AND REPLACEMENT
REVISION LOG First Issue An appropriate entry should be made in the aircraft log book upon accomplishment.
If ownership of aircraft has changed, please, forward to new owner.
Leonardo S.p.A.
Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) Italy Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595 ALERT
SERVICE BULLETIN
S.B. N°139-648 ALERT DATE: August 10, 2020 Page 2 of 17 REVISION: /
1. PLANNING INFORMATION A. EFFECTIVITY Part I:
LH/RH liferaft reservoirs listed in Table 1, installed on AW139 helicopters or kept in stock.
P/N S/N Description 3G2560V01251 VT098855, VT098888, VT106705, VT108649, VT113304, VT113311, VT113313, VT113317, VT113735, VT114524, VT115880, VT117146, VT118688, VT118955, VT119904, VT126158, VT143258, VT152697, VT154330, VT162132, VT169279 LH liferaft reservoir 3G2560V01951 VI026547, VT037511, VT037569, VT066175, VT104133, VT106695, VT108652, VT111164, VT113323, VT113325, VT113326, VT113328, VT114485, VT118643, VT123350, VT126156, VT142275, VT154331, VT157588, VT158618, VT158847, VT158848, VT161457 RH liferaft reservoir Table 1 Part II:
LH/RH liferaft reservoirs P/N 3G2560V01251/ 3G2560V01951 (part of 15pax/18pax emergency flotation kit P/N 4G9560F00111/ 4G9560F00211) with S/N not listed in Table 1.
Part III:
LH/RH liferaft reservoirs P/N 3G2560V01251/ 3G2560V01951 (part of 15pax/18pax emergency flotation kit P/N 4G9560F00111/ 4G9560F00211) with S/N not listed in Table 1.
B. COMPLIANCE Part I:
- Within twenty-five (25) FH after the issue date of this Service Bulletin, for all helicopters equipped with LH/RH liferaft reservoirs.
- Before the next installation on AW139 helicopter but not later than one (1) month, after the issue date of this Service Bulletin, for LH/RH reservoirs kept in stock.
Part II:
- Within twenty-five (25) FH from the issue date of this Service Bulletin or when they reach fifty (50) FH since new or since first installation after replacement on a helicopter, whichever comes later, for parts installed on the helicopter at the issue date of this Service Bulletin.
S.B. N°139-648 ALERT DATE: August 10, 2020 REVISION: / Page 3 of 17 Part III:
- Within twenty-five (25) FH from the issue date of this Service Bulletin, for parts installed on the helicopter at the issue date of this Service Bulletin.
- Immediately after installation on the helicopter, for LH/RH reservoir installed as replacement part.
NOTE Unless otherwise specified, the number of FH indicated in this Service Bulletin are those accumulated by the LH/RH liferaft reservoir since new or since its first installation after replacement on a helicopter.
C. CONCURRENT REQUIREMENTS N.A.
D. REASON This Service Bulletin is issued to prescribe one-off inspections of LH and RH liferaft reservoir installation and the replacement of few specific reservoir serial numbers.
E. DESCRIPTION Following an inadvertent life raft deployment event on an in-service AW139 helicopter, Leonardo Helicopters Division has precautionary developed this Service Bulletin to verify the correct installation of the LH and RH life rafts inflation system.
Part I of this Service Bulletin prescribes the removal from the helicopter of some life raft reservoir S/Ns.
Moreover, Part II and Part III provide instructions for a one-off inspection of the valve pull rod and of the life raft actuator cable, to make sure that they are correctly installed on the whole AW139 fleet equipped with 15pax/18pax emergency flotation kit P/N 4G9560F00111/ 4G9560F00211.
In case of findings, the cable rigging and/or the replacement of the life raft reservoir are required.
F. APPROVAL The technical content of this Service Bulletin is approved under the authority of DOA nr.
EASA.21.J.005. For helicopters registered under other Aviation Authorities, before applying the Service Bulletin, applicable Aviation Authority approval must be checked within Leonardo Helicopters customer portal.
S.B. N°139-648 ALERT DATE: August 10, 2020 Page 4 of 17 REVISION: / EASA states mandatory compliance with inspections, modifications or technical directives and related time of compliance by means of relevant Airworthiness Directives.
If an aircraft listed in the effectivity embodies a modification or repair not LHD certified and affecting the content of this Service Bulletin, it is responsibility of the Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on the aircraft, for any adaptation necessary before incorporation of the present Service Bulletin.
G. MANPOWER To comply with this Service Bulletin the following MMH are deemed necessary:
Part I: approximately one (1) MMH;
Part II: approximately one (1) MMH;
Part III: approximately one (1) MMH.
MMH are based on hands-on time and can change with personnel and facilities available.
H. WEIGHT AND BALANCE N.A.
I. REFERENCES
1) PUBLICATIONS
DATA MODULE DESCRIPTION PART DM01 39-A-00-20-00-00A-120A-A Helicopter on ground for a safe maintenance
I, II, III DM02 39-A-06-41-00-00A-010A-A Access doors and panels - General Data
II, III DM03 39-E-25-62-01-00A-520A-K Left bottle assembly - Remove procedure I, II DM04 39-E-25-62-01-00A-720A-K Left bottle assembly - Install procedure I, II DM05 39-E-25-62-02-00A-520A-K Right bottle assembly - Remove procedure I, II DM06 39-E-25-62-02-00A-720A-K Right bottle assembly - Install procedure I, II
2) ACRONYMS AMDI Aircraft Material Data Information AMP Aircraft Maintenance Publication DM Data Module
S.B. N°139-648 ALERT DATE: August 10, 2020 REVISION: / Page 5 of 17 FH Flight Hours FOC Free Of Charge ITEP Illustrated Tool and Equipment Publication LHD Leonardo Helicopters Division MMH Maintenance Man Hours RA Return Authorization
3) ANNEX N.A.
J. PUBLICATIONS AFFECTED AW139 AMP K. SOFTWARE ACCOMPLISHMENT SUMMARY N.A.
S.B. N°139-648 ALERT DATE: August 10, 2020 Page 6 of 17 REVISION: /
2. MATERIAL INFORMATION A. REQUIRED MATERIALS
1) PARTS PART I # P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTE LOG P/N 1 3G2560V01251 LH liferaft reservoir 1 . (1) (2) - 2 3G2560V01951 RH liferaft reservoir 1 . (1) (2) -
2) CONSUMABLES Refer to AMDI for the consumable materials required to comply with the AMP DM referenced in the accomplishment instructions.
3) LOGISTIC MATRIX N.A.
NOTE
(1) Item to be supplied in exchange for one of the S/N listed in Table 1 of “EFFECTIVITY” paragraph.
(2) Refer to “INDUSTRY SUPPORT INFORMATION” paragraph for details to request the parts.
B. SPECIAL TOOLS # P/N DESCRIPTION Q.TY NOTE PART 3 601.2382 Diffuser cap 1 (B1) II Refer also to ITEP for the special tools required to comply with the AMP DM referenced in the accomplishment instructions.
SPECIAL TOOLS NOTE Item to be provided by the supplier. Refer to “INDUSTRY SUPPORT INFORMATION” paragraph for details to request the parts.
S.B. N°139-648 ALERT DATE: August 10, 2020 REVISION: / Page 7 of 17 C. INDUSTRY SUPPORT INFORMATION To receive replacement component and tool in support of this Service Bulletin, the Customer should e-mail a free of charge purchase order to support@dartaero.com.
The purchase order should be made to DART Aerospace and make reference to Service Bulletin 139-648, with instructions on the location where the replacement has to be shipped. DART will issue an RA for the component being replaced and would require that the return component be shipped to DART within five (5) business days of receiving the replacement. The return address will be indicated on the RA with shipping instructions. Shipping costs will be FOC for customers. If the component is not returned, there will be a charge for the replacement component that has been shipped.
S.B. N°139-648 ALERT DATE: August 10, 2020 Page 8 of 17 REVISION: /
3. ACCOMPLISHMENT INSTRUCTIONS
GENERAL NOTES
a) Place an identification tag on all components that are re-usable, including the attaching hardware that has been removed to gain access to the modification area and adequately protect them until their later reuse.
b) All lengths are in mm.
PART I NOTE Steps 1 thru 5 are applicable to LH/RH life raft reservoirs installed on the helicopter.
1. In accordance with AMP DM 39-A-00-20-00-00A-120A- A, prepare the helicopter on ground for a safe maintenance. Disconnect the battery, all electrical power sources and/or the external power supply.
2. Remove the affected LH/RH life raft reservoir P/N 3G2560V01251/3G2560V01951 from the helicopter, in accordance with the relevant AMP DM:
39-E-25-62-01-00A-520A-K - Left bottle assembly - Remove procedure;
39-E-25-62-02-00A-520A-K - Right bottle assembly - Remove procedure.
NOTE While applying step 3, do not connect the life-raft inflation hose P/N 3G2560L00131 to the bottle assembly, as it must be disconnected for the application of step 4.
3. Install a serviceable LH/RH life raft reservoir P /N 3G2560V01251/3G2560V01951 to replace the part removed at previous step 2, in accordance with the relevant AMP DM:
39-E-25-62-01-00A-720A-K - Left bottle assembly - Install procedure;
39-E-25-62-02-00A-720A-K - Right bottle assembly - Install procedure.
4. Perform the life raft actuator cable inspection in accordance with Part III of this Service Bulletin.
5. Return the helicopter to flight configuration and record for compliance with Part I of this Service Bulletin on the helicopter logbook.
6. Send the affected LH/RH liferaft reservoir to the supplier; for details Refer to “INDUSTRY SUPPORT INFORMATION” paragraph.
S.B. N°139-648 ALERT DATE: August 10, 2020 REVISION: / Page 9 of 17
7. Send the attached compliance form to the following mail box:
engineering.support.lhd@leonardocompany.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.
S.B. N°139-648 ALERT DATE: August 10, 2020 Page 10 of 17 REVISION: /
PART II
1. In accordance with AMP DM 39-A-00-20-00-00A-120A-A, prepare the helicopter on ground for a safe maintenance, if required. Disconnect the battery, all electrical power sources and/or the external power supply.
2. In accordance with AMP DM 39-A-06-41-00-00A-010A-A and with reference to Figure 1, gain access to the affected area.
3. With reference to Figure 1 Detail B, disconnect the flex hose P/N 3G2560L00131 from the bottle valve.
4. With reference to Figure 2 Detail A, install the diffuser cap P/N 601.2382.
5. With reference to Figures 1 and 2, perform the valve pull rod inspection as described in the following procedure:
5.1 With reference to Figure 1 Detail B and Figure 2 Detail B, perform the measurement of the actuation cable between the face of the pull rod and the back of the valve cap and compare it with the maximum allowed of 68.5 mm (see measure A).
NOTE Perform following steps 5.2 thru 5.4 only if the measurement value exceeds the allowed limit.
Otherwise skip to step 6.
5.2 Remove the affected LH/RH life raft reservoir P/ N 3G2560V01251/3G2560V01951 from the helicopter, in accordance with the relevant AMP DM:
39-E-25-62-01-00A-520A-K - Left bottle assembly - Remove procedure;
39-E-25-62-02-00A-520A-K - Right bottle assembly - Remove procedure.
5.3 Send the affected LH/RH liferaft reservoir to the supplier to adjust/replace the valve assy; for details refer to “INDUSTRY SUPPORT INFORMATION” paragraph.
5.4 Install a serviceable LH/RH life raft reservoir P/N 3G2560V01251/3G2560V01951 on the helicopter, in accordance with the relevant AMP DM:
39-E-25-62-01-00A-720A-K - Left bottle assembly - Install procedure;
39-E-25-62-02-00A-720A-K - Right bottle assembly - Install procedure.
NOTE Do not perform steps 6 and 7 at this time if it is required to perform also the life raft actuator cable inspection, in accordance with Part III.
6. With reference to Figure 2 Detail A remove the di ffuser cap P/N 601.2382 from the bottle valve.
7. With reference to Figure 1 Detail B, connect the flex hose P/N 3G2560L00131 to the bottle
S.B. N°139-648 ALERT DATE: August 10, 2020 REVISION: / Page 11 of 17 valve. Tighten the nut of the hose to the standard torque value.
8. Repeat steps 2 thru 7 for the other side, if required.
9. Return the helicopter to flight configuration, if required, and record for compliance with Part II of this Service Bulletin on the helicopter logbook.
10. Send the attached compliance form to the following mail box:
engineering.support.lhd@leonardocompany.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.
S.B. N°139-648 ALERT DATE: August 10, 2020 Page 12 of 17 REVISION: /
PART III NOTE Steps 1 and 2 are not applicable if Part III is performed at the same time of Part II.
1. In accordance with AMP DM 39-A-00-20-00-00A-120A- A, prepare the helicopter on ground for a safe maintenance, if required. Disconnect the battery, all electrical power sources and/or the external power supply.
2. In accordance with AMP DM 39-A-06-41-00-00A-010A-A and with reference to Figure 1, gain access to the affected area.
NOTE Following steps 3 and 4 are not applicable if the inspection is performed on a newly installed liferaft reservoir or the diffuser cap has been already installed, complying with Part II.
3. With reference to Figure 1 Detail B, disconnect t he flex hose P/N 3G2560L00131 from the bottle valve.
4. With reference to Figure 2 Detail A, install the diffuser cap P/N 601.2382.
5. With reference to Figure 1, perform the life raft actuator cable inspection as described in the following procedure:
5.1 With reference to Figure 1 View A and Detail C, with the junction box actuation arm in its rest position (90° with respect to the helicopter longitudinal axis), verify the presence of a 5.0.. mm clearance between the sphere at the end of the cable and the activation system in accordance with the measurement range shown (see measure B).
5.2 If the measurement value exceeds the allowed limit, perform the life raft activation cable adjustment in accordance with Annex A.
6. With reference to Figure 2 Detail A, remove the diffuser cap P/N 601.2382 from the valve.
7. With reference to Figure 1 Detail B, connect the flex hose P/N 3G2560L00131 to the bottle valve. Tighten the nut of the hose to the standard torque value.
8. Repeat steps 2 thru 7 for the other side, if required.
9. Return the helicopter to flight configuration, and record for compliance with Part III of this Service Bulletin on the helicopter logbook.
10. Send the attached compliance form to the following mail box:
engineering.support.lhd@leonardocompany.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”. mai questo segnalibro