Text
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'fe0c084428e207ee57e6abc0f752e4dd7476a9a41a6535a9cbd0640d51283a80' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'fe0c084428e207ee57e6abc0f752e4dd7476a9a41a6535a9cbd0640d51283a80' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
P age 1 of 26 N ° 139-754 D ATE: March 31, 2023 REV. : / - March 15, 2017 TITLE ATA 62 – MAIN ROTOR (MR) PITCH LINK UPPER ROD END ASSY INSPECTION
REVISION LOG First Issue Leonardo S.p.A.
Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) Italy Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595 An appropriate entry should be made in the aircraft log book upon accomplishment.
If ownership of aircraft has changed, please, forward to new owner.
EMERGENCY ALERT
SERVICE BULLETIN
S.
B. N°139-754 EMERGENCY ALERT DATE: March 31, 2023 Page 2 of 26 REVISION: /
1. PLANNING INFORMATION A. EFFECTIVITY
WARNING
FOR MR PITCH LINK UPPER ROD END ASSY S/N,
STARTING WITH MCR AND HAVING ONLY FOUR DIGITS, CONSIDER THE FOLLOWING:
TO INDENTIFY IF THE S/N IS AFFECTED COMPARE IT
S FOUR DIGITS WITH THE LAST FOUR DIGITS OF THE S/N’s REPORTED IN ANNEX A STARTING WITH “MCR0” EXAMPLE:
IF INSTALLED S/N IS MCR8709 AND S/N REPORTED IN ANNNEX A IS MCR08709 THE SERVICE BULLETIN IS APPLICABLE.
Part I MR pitch link upper rod end assy P/N 3G6230A01133 with S/N reported in Annex A and not marked with letter “R” (ref. Figure 5) installed on AB/AW139 helicopters.
Part II
- All pitch link assy P/N 3G6230A01033 equipped with an upper rod end assy P/N 3G6230A01133 with S/N reported in Annex A and not marked with letter “R” (ref.
Figure 5) kept in stock.
- All upper rod end assy P/N 3G6230A01133 with S/N reported in Annex A and not marked with letter “R” (ref. Figure 5) kept in stock.
Part III MR pitch link upper rod end assy P/N 3G6230A01133 with S/N reported in Annex A and not marked with letter “R” (ref. Figure 5) installed on AB/AW139 helicopters that have passed the check performed in accordance with Part I of this Service Bulletin.
B. COMPLIANCE Part I Before the next flight.
Part II Before the installation on the helicopter.
S.
B. N°139-754 EMERGENCY ALERT DATE: March 31, 2023 REVISION: / Page 3 of 26 Part III In occasion of the next removal of pitch link assy P/N 3G6230A01033 or not later than 25 flight hours, whichever occurs first, after application of Part I of this Service Bulletin.
C. CONCURRENT REQUIREMENTS N.A.
D. REASON Following one case of incorrect installation of the bearing in MR pitch link upper rod end a ssy P/N 3G6230A01133, this Service Bulletin is issued in order to provide the necessary instructions to identify a batch of S/N potentially affected and to replace them.
E. DESCRIPTION Part I of this Service Bulletin prescribes a one-off inspection of MR pitch link upper rod e nd assy P/N 3G6230A01133, installed on the helicopter, to check the presence of gap between MR pitch link upper rod end assy bearing and pitch control lever assy. In case gap is detected, the affected upper rod end assy shall be replaced with a serviceable one.
Part II of this Service Bulletin prescribes a one-off inspection of MR pitch link upper rod end assy P/N 3G6230A01133, kept in stock, or installed on MR pitch link assy P/N 3G6230A01033, kept in stock, to check the dimension of the bearing installed in the upper rod end assy. This Part, also, prescribes to remark the inspected upper rod end assy S/N, in case that dimensional check had positive response.
Part III of this Service Bulletin prescribes to remark the S/N of the upper rod end assy P/N 3G6230A01133, that have passed the inspection performed in accordance with Part I of this Service Bulletin.
F. APPROVAL The technical content of this Service Bulletin is approved under the authority of DOA n
r. EASA.21.J.005. For helicopters registered under other Aviation Authorities, before applying the Service Bulletin, applicable Aviation Authority approval must be checked within Leonardo Helicopters customer portal.
EASA states mandatory compliance with inspections, modifications or technical directives and related time of compliance by means of relevant Airworthiness Directives.
If an aircraft listed in the effectivity embodies a modification or repair not LHD certified and affecting the content of this Service Bulletin, it is responsibility of the
S.
B. N°139-754 EMERGENCY ALERT DATE: March 31, 2023 Page 4 of 26 REVISION: / Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on the aircraft, for any adaptation necessary before incorporation of the present Service Bulletin.
G. MANPOWER To comply with this Service Bulletin, the following MMH are deemed necessary:
P art I: 1 (one) MMH;
Part II: 1 (one) MMH;
Part III: 1 (one) MMH.
MMH are based on hands-on time and can change with personnel and facilities available.
H. WEIGHT AND BALANCE N.A.
I. REFERENCES
1) PUBLICATIONS Fo llowing Data Modules refer to AMP:
DATA MODULE DESCRIPTION PART DM01 39-A-00-20-00-00A-120A-A Helicopter on ground for a safe maintenance.
I DM02 39-A-62-31-01-01A-921A-B Rod ends (pitch link) - Replacement (remove and install a new item) I DM03 39-A-62-31-01-00A-520A-A Pitch link - Remove procedure III DM04 39-A-62-31-01-00A-720A-A Pitch link - Install procedure III
2) ACRONYMS & ABBREVIATIONS AMDI Aircraft Material Data Information A MP Aircraft Maintenance Publication DM Data Module DOA Design Organization Approval EASA European Aviation Safety Agency LHD Leonardo Helicopters Division MMH Maintenance Man Hours MR Main Rotor P/N Part Number SB Service Bulletin
S.
B. N°139-754 EMERGENCY ALERT DATE: March 31, 2023 REVISION: / Page 5 of 26 S/N Serial Number
3) ANNEX Annex A SB applicability list - Upper Rod End Assy S/N J. PUBLICATIONS AFFECTED N.A.
K. SOFTWARE ACCOMPLISHMENT SUMMARY N.A.
S.
B. N°139-754 EMERGENCY ALERT DATE: March 31, 2023 Page 6 of 26 REVISION: /
2. MATERIAL INFORMATION A. REQUIRED MATERIALS
1) PARTS
PART I AND PART II # P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTE LOG P/N 1 3G6230A01133 Upper Rod End Assy AR . (1) - 2 3G6230A01033 Pitch Link Assy AR . (1) -
PART III N.A.
Refer also to IPD for the spares materials required t o comply with the AMP DMs referenced in the accomplishment instructions.
2) CONSUMABLES # SPEC./LHD CODE NUMBER DESCRIPTION Q.TY NOTE PART 3 Commercial Soft lint-free cloth (C011) AR (2) I 4 Commercial Marker AR (2) II, III 5 MIL-L-81352C or MIL-PRF-85285 Type I Class H Transparent coating AR (2) II, III Refer also to AMDI for the consumable materials required to comply with the AMP DM referenced in the accomplishment instructions.
3) LOGISTIC MATRIX N.
A.
NOTE
(1) Item to be ordered in quantity only if the component must be replaced;
(2) Item to be procured as local supply.
B. SPECIAL TOOLS # P/N DESCRIPTION Q.TY NOTE PART 6 Commercial Feeler gauge of 0,5 mm 1 (B1) I 7 Commercial Caliper / Gauge 1 (B1) II Refer also to ITEP for the special tools required to comply with the AMP DM referenced in the accomplishment instructions.
SPECIAL TOOLS NOTE Item to be procured as local supply.
S.
B. N°139-754 EMERGENCY ALERT DATE: March 31, 2023 REVISION: / Page 7 of 26 C. INDUSTRY SUPPORT INFORMATION Owners/operators who comply with the instructions of this service bulletin no later than t he applicable date in the “Compliance” section will be eligible to receive required materials on free of charge basis, except for consumable materials and special tools.
NOTE: Customers who fail to comply with the instructions in this service bulletin before the compliance date are not eligible for the aforementioned special policy.
Please Issue relevant MMIR form to your Warranty Administration Dpt. including the Inspection Report in Figure 6, completed in every part.
NOTE: WRM will include RETURN MATERIAL AUTHORIZATION (RMA) number; the upper rod end assy P/N 3G6230A01133 disembarked from the aircraft has to be returned to LHD within fifteen (15) calendar days after the shipment of the replacement part. In case of missing return within fifteen (15) calendar days, Customer will be invoiced for the price of the replacement part.
S.
B. N°139-754 EMERGENCY ALERT DATE: March 31, 2023 Page 8 of 26 REVISION: /
3. ACCOMPLISHMENT INSTRUCTIONS
GENERAL NOTES
a) Place an identification tag on all components that are re-usable, including the attaching hardware that has been removed to gain access to the modification area and adequately protect them until their later reuse.
b) Exposed thread surface and nut must be protected using a layer of tectyl according to MIL-C-16173 grade I.
c) All lengths are in mm.
PART I
1. In accordance with AMP DM 39-A-00-20-00-00A-120A-A, prepare the helicopter on ground for a safe maintenance. Disconnect the battery, all electrical power sources and/or the external power supply.
NOTE Perform the following steps on all MR pitch link upper rod end P/N 3G6230A01133 installed on helicopter
2. With reference to Figure 1 thru Figure 3, perform the inspection of the upper rod end assy P/N 3G6230A01133 according to the following procedure:
2.1 Using a soft lint-free cloth clean the upper rod end assy bearing, bolt and pitch lever assy, to remove any residual;
2.2 According to Figure 1 Section A-A, using a feeler gauge of 0,5 mm, verify the presence of gap between the MR pitch link upper rod end assy bearing and the pitch control lever assy, on both sides:
2.2.1 If the gap is present on both sides or one side, as shown in Figure 2, in accordance with AMP DM 39-A-62-31-01-01A-921A-B, replace the upper rod end assyP/N 3G6230A01133 with a serviceable one. Compile the Inspection Report in Figure 6 and contact LHD before the return to flight.
Send the affected upper rod end assy to LHD.
2.2.2 If there is no gap, as shown in Figure 3, proceed to step 3 and apply Part III of this Service Bulletin in accordance with compliance time reported in paragraph 1.B of this Service Bulletin.
S.
B. N°139-754 EMERGENCY ALERT DATE: March 31, 2023 REVISION: / Page 9 of 26
3. Return the helicopter to flight configuration and record for compliance with Part I of this Service Bulletin on the helicopter logbook.
4. Gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.
As an alternative, send the attached compliance form to the following mail box:
engineering.support.lhd@leonardo.com and (for North, Central and South America) also to:
AWPC.Engineering.Support@leonardocompany.us
S.
B. N°139-754 EMERGENCY ALERT DATE: March 31, 2023 Page 10 of 26 REVISION: /
PART II
1. With reference to Figure 4, perform the inspection of the upper rod end assy P/N 3G6230A01133 according to the following procedure:
1.1 According to Figure 4 Detail B, using a caliper / gauge, check the dimension “X” of the bearing installed in the upper rod end assy.
1.2 If the dimension X is within the interval 38,05 - 38,10 mm, remark the upper rod end assy S/N as follow:
NOTE Any color of permanent marker is allowed as long as it is clearly visible.
1.2.1 Mark the letter “R” near the upper rod end assy S/N as shown in Figure 5, by means of a permanent marker covered by a layer of transparent coating MIL-L-81352C or MIL-PRF-85285 Type I Class H.
1.2.2 Update the S/N of the upper rod end assy on the pitch link assy P/N 3G6230A01033 Log Card, as applicable.
1.3 If the measurement is outside the interval 38,05 - 38,10 mm, compile the Inspection Report in Figure 6 and send the affected part to LHD.
2. Gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.
As an alternative, send the attached compliance form to the following mail box:
engineering.support.lhd@leonardo.com and (for North, Central and South America) also to:
AWPC.Engineering.Support@leonardocompany.us
S.
B. N°139-754 EMERGENCY ALERT DATE: March 31, 2023 REVISION: / Page 11 of 26
PART III NOTE Based on the position of the upper rod end S/N marked on the component, if necessary, in accordance with AMP DM 39-A-62-31-01-00A-520A-A, remove pitch link assy P/N 3G6230A01033 from the helicopter.
1. Gain access to the MR pitch link upper rod end assy P/N 3G6230A01133 and remark the S/N as follow:
NOTE Any color of permanent marker is allowed as long as it is clearly visible.
1.1 Mark the letter “R” near the upper rod end assy S /N as shown in Figure 5, by means of a permanent marker covered by a layer of transparent coating MIL-L-81352C or MIL-PRF-85285 Type I Class H.
1.2 Update the S/N of the upper rod end assy on the pitch link assy P/N 3G6230A01033 Log Card, as applicable.
NOTE If necessary, in accordance with AMP DM 39-A-62-31-01-00A-720A-A, install pitch link assy P/N 3G6230A01033 on the helicopter.
2. Return the helicopter to flight configuration and record for compliance with Part III of this Service Bulletin on the helicopter logbook.
3. Gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.
As an alternative, send the attached compliance form to the following mail box:
engineering.support.lhd@leonardo.com and (for North, Central and South America) also to:
AWPC.Engineering.Support@leonardocompany.us Non cancellare mai questo segnalibro Non cancellare mai interruzione sezione
F igure 1 S.B. N°139-754 EMERGENCY ALERT DATE: March 31, 2023 Page 12 of 26 REVISION: /