TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'd86a6b93ee28998aedc74e26659c8ec138653a9af8dfa95b5ea6fafcb25288fb' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'd86a6b93ee28998aedc74e26659c8ec138653a9af8dfa95b5ea6fafcb25288fb' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
N° 189-177 DA TE: February 22, 2018 REV. : A - F ebruary 28, 2018 Pa ge 1 of 26 TITLE ATA 55 - TAIL PLANE INSTALLATION UPGRADE
REVISION LOG No further actions are required for Customers already compliant with rev./ R evision A of this SB has been issued to update the effectivity section of Part I, II and III.
The compliance time for all helicopters is intended to be calculated starting form issue date of revision A.
Revision bars in the margins identify changes.
Leonardo S.p.A.
Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) Italy Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595 An appropriate entry should be made in the aircraft log book upon accomplishment.
If ownership of aircraft has changed, please, forward to new owner.
EMERGENCY ALERT
SERVICE BULLETIN
S .B. N°189-177 EMERGENCY ALERT DATE: February 22, 2018 Page 2 of 26 REVISION: A - February 28, 2018
1. PLANNING INFORMATION A. EFFECTIVITY Part I:
A ll AW189 helicopters not already compliant with SB189-130 EXCEPT for the following S/N listed in the table below:
49024 From 89005 included onward From 92007 included onward 49031 49032 49034 49036 49040 49041 49046 49047 From 49050 included onward P art II:
All AW189 helicopters not already compliant with SB189-130 EXCEPT for the following S/N listed in the table below:
49024 From 89005 included onward From 92007 included onward 49031 49032 49034 49036 49040 49041 49046 49047 From 49050 included onward P art III:
AW 189 helicopters already compliant with SB189-130 and the following S/N listed in the table below:
49046 89008 92007 49053 89009 92008 P art IV:
All AW189 helicopters.
S.B. N°189-177 EMERGENCY ALERT DATE: February 22, 2018 REVISION: A - February 28, 2018 Page 3 of 26 B. COMPLIANCE Part I:
Before each flight until compliance with Part II of this SB.
Part II Within 100 flight hours or 1 month whichever occurs first from receipt of this Service Bulletin.
Part III Within 10 flight hours after the issue of this SB Part IV
- For helicopters affected by Part II of the present SB:
After 10 flight hours from compliance with Part II of the present SB; then after 30 flight hours; then every 50 flight hours until 400 flight hours, then every 400 flight hours.
- For helicopters affected by Part III of the present SB:
After 10 flight hours from compliance with Part III of the present SB; then after 30 flight hours; then every 50 flight hours until 400 flight hours, then every 400 flight hours.
- For all other helicopters:
After 10 flight hours after the issue of this SB; then after 30 flight hours; then every 50 flight hours until 400 flight hours, then every 400 flight hours.
C. CONCURRENT REQUIREMENTS The present SB supersedes and replace SB189-130.
D. REASON This SB has been issued after the report of two in service failures of the FWD LHS tail plane installation bolt. This SB provides all necessary instructions on how to inspect the forward bolt of the tail plane and to perform the tail plane installation retromod P/N 8G5510P00511 which provides the corrective action required to prevent the experienced failures which, if not corrected, could potentially lead to reduced stability in forward flight.
E. DESCRIPTION Following two cases of failure of the tail plane installation LHS FWD bolt, LHD issued this SB to mandate the upgrade of the installation to the latest available design which provides features designed to prevent further similar occurrences on that bolt.
S.B. N°189-177 EMERGENCY ALERT DATE: February 22, 2018 Page 4 of 26 REVISION: A - February 28, 2018 Part I of this SB introduces a precautionary recurrent visual check of the tail plane installation forward bolts required in order to monitor the condition of the bolt until the installation will be upgraded as required by Part II.
Part II of this SB provides the necessary instruction on how to perform the tail plane installation retromod P/N 8G5510P00511. The retromod introduces an improved tail plane installation that reduces fretting and wear of the affected bolt.
Part III of this SB provides instructions to change the tightening torque interval of the two tail plane installation forward bolts from 5 ÷ 20 Nm to 15 ÷ 20 Nm for helicopters that already install retromod P/N 8G5510P00511. The updated torque range represent the optimum value for tail plane front bolts installation.
Part IV of this Service Bulletin introduces a recurrent torque check inspection required in order to monitor the condition of the tail plane installation after compliance with the retromod P/N 8G5510P00511.
F. APPROVAL The technical content of this Service Bulletin is approved under the authority of DOA nr. EASA.21.J.005. For helicopters registered under other Aviation Authorities, before applying the Service Bulletin, applicable Aviation Authority approval must be checked within Leonardo Helicopters customer portal.
E.A.S.A. states mandatory compliance with inspections, modifications or technical directives and related time of compliance by means of relevant Airworthiness Directives.
If an aircraft listed in the effectivity embodies a modification or repair not LHD certified and affecting the content of this Service Bulletin, it is responsibility of the Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on the aircraft, for any adaptation necessary before incorporation of the present Service Bulletin.
G. MANPOWER To comply with this Service Bulletin the following Maintenance-Man-Hours (MMH) are deemed necessary:
Part I: approximately 0.25 MMH.
Part II: approximately twelve (12) MMH.
Part III: approximately one (1) MMH.
Part IV: approximately one (1) MMH Maintenance-Man-Hours are based on hands-on time and can change with personnel and facilities available.
S.B. N°189-177 EMERGENCY ALERT DATE: February 22, 2018 REVISION: A - February 28, 2018 Page 5 of 26 H. WEIGHT AND BALANCE PART I N.A.
PART II WEIGHT (Kg) 0.195 ARM (mm) MOMENT (Kgmm) LONGITUDINAL BALANCE 12797.4 2495.5 LATERAL BALANCE -4.3 -0.830
PART III, PART IV N.A.
I. REFERENCES
1) PUBLICATIONS
DATA MODULE DESCRIPTION PART DM01 89-A-00-20-00-00A-120A-A Helicopter on ground for a safe maintenance.
II,III, IV DM02 89-A-06-41-00-00A-010A-A Access doors and panels - General data
II,III, IV DM03 89-A-55-11-01-00A-520A-A Tail plane - Remove procedure II DM04 89-A-55-11-01-00A-720A-A Tail plane - Install procedure II, II, IV
2) ACRONYMS AMP Aircraft Maintenance Publication FWD Forward MMH Maintenance Man Hour SB Service Bulletin
3) ANNEX N.A.
J. PUBLICATIONS AFFECTED AW189 Aircraft Maintenance Publication (AMP) AW189 Illustrated Parts Data Publication (IPD).
K. SOFTWARE ACCOMPLISHMENT SUMMARY N.A.
S.B. N°189-177 EMERGENCY ALERT DATE: February 22, 2018 Page 6 of 26 REVISION: A - February 28, 2018
2. MATERIAL INFORMATION A. REQUIRED MATERIALS
1) PARTS PART I N.A.
PART II # P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTE LOG P/N 1 8G5510P00511
TAIL PLANE
INSTALLATION
RETROMOD REF .
2 8G5350A07951 8G5350A07951M01 or equivalent RH spotface plate 1 .. 189-130L1 3 8G5510A06751 Bearing sleeved flanged 1 .. 189-130L1 4 8G5510A06351 Bearing sleeved flanged 1 .. 189-130L1 5 8G5510A05951 Bolt 2 .. 189-130L1 6 8G5510A02651 Bolt 2 .. 189-130L1 7 8G5510A02252 Bolt 2 .. 189-130L1 8 4F5510A09151 Washer 2 .. 189-130L1 9 4F5510A00232 Rod assy 1 .. 189-130L1 10 HL82-6AW Collar 12 .. 189-130L1 11 HL75-8AW Collar 4 .. 189-130L1 12 HL10VR6-11 Pin 8 .. 189-130L1 13 HL10VR6-13 Pin 2 .. 189-130L1 14 HL10VR6-17 Pin 1 .. 189-130L1 15 HL10VR6-19 Pin 1 .. 189-130L1 16 A864A1151E018R 8G5510A02151 Peel washer 1 .. 189-130L1 17 A994A51N035K Washer 2 .. 189-130L1 18 A994A57N030K Washer 1 .. 189-130L1 19 A904A07PV Washer 2 .. 189-130L1 20 A904A07PC Washer 2 .. 189-130L1 21 A864A1151F030H Washer 2 .. 189-130L1 22 MS24665-302 Cotter pin 6 .. 189-130L1 23 MS20002C7 Washer 4 .. 189-130L1
PART III # P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTE LOG P/N 24 MS24665-302 Cotter pin 2 . /
PART IV # P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTE LOG P/N 25 MS24665-302 Cotter pin 2 . /
S.B. N°189-177 EMERGENCY ALERT DATE: February 22, 2018 REVISION: A - February 28, 2018 Page 7 of 26
2) CONSUMABLES The following consumable materials, or equivalent, are necessary to accomplish this Service Bulletin:
# Spec./LHD code number DESCRIPTION Q.TY NOTE PART 26 AWMS05-001 Ty 1 Cl B Grade 2 / Code No.
999999999000005965 Sealant MC780 B AR II 27 AWMS05-001 Ty 1 Cl C Grade 1 / Code No.
999999999000009854 Sealant MC780 C AR II 28 Code 999999999000000773 Adhesive EA9395 A/B AR II 29 MIL-PRF-16173 Grade 1 Cl 1 Code N° 999999999000000191 Corrosion inhibitor AR II 30 DTD900/4488A or DTD900/4766 / Code N° 900001846 or 102971ITL Jointing compound JC5A AR II 31 BMS 3-38 Code No. 999999999000017311 Jointing compound Cor-ban 27L AR (1) II 32 MS20995C42 Lock wire AR II, III
3) LOGISTIC MATRIX In order to apply this Service Bulletin, the following Logistic P/N can be ordered in accordance with the applicable notes:
LOGISTIC P/N Q.TY (PER HELO) NOTE PART 189-130L1 1 (2) II NOTE
(1) To be used as alternative to jointing compound JC5A.
(2) Applicable to all helicopters affected by this Service Bulletin.
B. SPECIAL TOOLS The following special tools, or equivalent, are necessary to accomplish this Service Bulletin:
# P/N DESCRIPTION Q.TY NOTE PART 31 8G5350G00731 Bush extractor 1 II C. INDUSTRY SUPPORT INFORMATION WARRANTY: Owners/Operators who comply with the instructions of this Service Bulletin no later than the applicable date in the “Compliance” section will be eligible to receive REQUIRED MATERIALS on free of charge basis, except for Consumable Materials and Special Tools.
NOTE: Customers who fail to comply with the instructions in this Service Bulletin before the compliance date are not eligible for the aforementioned special policy.
Please Issue relevant MMIR form to your Warranty Administration Dpt.
S.B. N°189-177 EMERGENCY ALERT DATE: February 22, 2018 Page 8 of 26 REVISION: A - February 28, 2018
3. ACCOMPLISHMENT INSTRUCTIONS
GENERAL NOTES
a) Place an identification tag on all components that are re-usable, including the attaching hardware that has been removed to gain access to the modification area and adequately protect them until their later re-use.
b) Shape the cables in order to prevent interference with the structure and the other existing installations, using where necessary suitable lacing cords.
c) Exercise extreme care during drilling operations to prevent instruments, cables and hoses damage.
d) After drilling, remove all swarf and sharp edges.
Apply on bare metal a light film of primer unless the hole is used for ground connection.
e) Wet assemble all hi-locks fasteners by means of Sealant MC780 C.
f) Carry out duplicate inspections to check correct installation, safety, security, final torque and locking on vital point parts.
g) Protect bolts and nuts with corrosion inhibitor MIL- PRF-16173 GRADE 1.
h) If necessary, removal of Hi-lok fasteners is allowed in order to aid rework.
i) All lengths are in mm.
PART I
1. With reference to Figure 12, perform a visual inspection of the tail plane installation.
Make sure that the forward attachment bolts P/N 8G5510A06251 and P/N 8G5510A05951 are correctly installed and not broken.
2. If a bolt is found damaged, apply tail plane installation retromodification P/N 8G5510P00511 in accordance with Part II of this SB and advise Leonardo Product Support Engineering at the following address:
pse_aw189.mbx@leonardocompany.com.
3. Record for compliance with Part I of this Service Bulletin.
S.B. N°189-177 EMERGENCY ALERT DATE: February 22, 2018 REVISION: A - February 28, 2018 Page 9 of 26
PART II
1. In accordance with AMP DM 89-A-00-20-00-00A-120A-A, prepare the helicopter on ground for a safe maintenance. Disconnect the battery, all electrical power sources and/or the external power supply.
2. In accordance with AMP DM 89-A-06-41-00-00A-010A-A, remove the access panels 321A and 322A.
3. Perform the tail plane installation retromod P/N 8G5510P00511 as described in the following procedure:
3.1 With reference to Figure 2 Details A, B, Step 1.1 and Step 1.2, remove the indicated hardware from LH rod assy P/N 8G5510A06032.
3.2 With reference to Figure 2 Detail B Step 1.2, remove and discard the LH rod assy P/N 8G5510A06032 from the helicopter.
3.3 With reference to Figure 2 Detail C Step 1.3, remove the indicated hardware from RH rod assy P/N 8G5510A06032.
3.4 With reference to Figure 3 Details D, E, F, Step 2 and in accordance with AMP DM 89-A-55-11-01-00A-520A-A, remove the indicated hardware and the tail plane from the helicopter. Discard the hardware.
3.5 With reference to Figure 4 Detail G Step 3.1, remove the indicated Hi-Lok from the RH spotface plate P/N 4F5350A09951.
3.6 With reference to Figure 4 Detail G Step 3.2, remove and discard the installed RH spotface plate P/N 4F5350A09951 from helicopter.
CAUTION Take care not to damage the internal bore of the fitting.
3.7 With reference to Figure 5 Detail H Step 4.1 and Figure 11, carefully remove and discard the indicated bush from the lower fitting assy P/N 8G5350A06732 by means of bush extractor tool P/N 8G5350G00731.
NOTE If necessary 0.5mm liquid shim is allowed. Use adhesive EA9395.
3.8 With reference to Figure 5 Detail J Steps 4.2 an d 4.3, install the new RH spotface plate P/N 8G5350A07951 on the helicopter by means of n°4 pins P/N HL10VR6- 11, a pin P/N HL10VR6-17, a pin P/N HL10VR6-19 and n°6 collars P/N HL82- 6AW.
3.9 With reference to Figure 6 Detail L Step 5.1, adjust the length of the rod assy P/N 4F5510A00232 to 186.5mm.
S.B. N°189-177 EMERGENCY ALERT DATE: February 22, 2018 Page 10 of 26 REVISION: A - February 28, 2018
CAUTION Apply Titanite JC5A lubricant to the shank of the bolt.
Make sure to not apply the lubricant to threaded part.
3.10 With reference to Figure 6 Detail M Step 5.2, i nstall the rod assy P/N 4F5510A00232 to the LH tailplane upper fitting by means of a bolt P/N 8G5510A02651, a washer P/N MS20002C7, a washer P/N NAS1149C0732R and a nut P/N MS17825-7.
3.11 With reference to Figure 6 Detail M Step 5.3, torque the bolt to 5.0÷20.0 Nm and lock the nut by means of cotter pin P/N MS24665-302.
3.12 With reference to Figure 7 Detail N Step 6.1, install a Teflon washer P/N A994A57N030K in the indicated position.
3.13 With reference to Figure 7, temporarily position the tailplane assy in its installation position.
CAUTION Apply Titanite JC5A lubricant to the shank of the bolt.
Make sure to not apply the lubricant to threaded part.
3.14 With reference to Figure 7 Detail N Step 6.2, i nstall a bolt P/N 8G5510A05951, a convex washer P/N A904A07PV and a concave washer P/N A904A07PC.
3.15 With reference to Figure 7 Detail N Steps 6.3 and 6.4, install the bearing sleeved flange P/N 8G5510A06751 and then a washer P/N NAS1149C0763R and a nut P/N MS17825-7; lightly tighten the nut.
3.16 With reference to Figure 7 Detail N Step 6.5, torque the nut to 20.0 Nm.
3.17 With reference to Figure 7 Detail N Step 6.5, undo nut and bolt to release the run down torque.
3.18 With reference to Figure 7 Detail N Step 6.5, torque the nut to 15.0÷20.0 Nm.
CAUTION Apply Titanite JC5A lubricant to the shank of the bolt.
Make sure to not apply the lubricant to threaded part.
3.19 With reference to Figure 8 Detail P Step 7.1, i nstall a bolt P/N 8G5510A05951, a convex washer P/N A904A07PV and a concave washer P/N A904A07PC.
S.B. N°189-177 EMERGENCY ALERT DATE: February 22, 2018 REVISION: A - February 28, 2018 Page 11 of 26 NOTE Make sure that it is possible to install the bearing sleeved flange P/N 8G5510A06351 by hands without forcing it in its seat.
CAUTION If there is interference between the sleeve and tail plane lower fitting, do not proceed with the installation and contact Leonardo PSE at the following address for further instructions:
pse_aw189.mbx@leonardocompany.com
3.20 With reference to Figure 8 Detail P Steps 7.2, 7.3 and 7.4, install the bearing sleeved flange P/N 8G5510A06351 and then a washer P/N NAS1149C0763R and a nut P/N MS17825-7; lightly tighten the nut.
3.21 With reference to Figure 9 Detail P Step 7.5, measure the gap between the tailplane lower fitting bush and the tailplane elastomeric bushing.
3.22 With reference to Figure 9 Detail A Step 7.6, adjust the thickness of the peel washer P/N A864A1151E018R or P/N 8G5510A02151 to match the gap measured at previous step.
3.23 If the peel washer supplied is P/N 8G5510A02151, with reference to Figure 9 Detail A Step 7.7, trim the peel washer to obtain a circular shape with external radius of 10.0. After cutting, remove any sharp edges.
3.24 With reference to Figure 9 Detail P Step 7.8, remove the hardware installed at steps 3.19 and 3.20 and install the peel washer P/N 8G5510A02151 or P/N A864A1151E018R.
3.25 Perform the steps 3.19 and 3.20 again.
NOTE If required to ensure correct alignment of the pin hole in bolt P/N 8G5510A05951 and castellations of nut P/N MS17825-7, it is acceptable to replace washer P/N NAS1149C0763R with washer P/N NAS1149C0732R.
3.26 With reference to Figure 9 Detail P Step 7.9, t orque the nut to 15.0÷20.0 Nm; lock the nut by means of cotter pin P/N MS24665-302.
3.27 With reference to Figure 10 Detail Q Step 8.1, install a washer P/N A994A51N035K, a washer P/N 4F5510A09151 and a washer P/N A864A1151F030H in the indicated position of the tailplane LH fitting.
S.B. N°189-177 EMERGENCY ALERT DATE: February 22, 2018 Page 12 of 26 REVISION: A - February 28, 2018
CAUTION Apply Titanite JC5A lubricant to the shank of the bolt.
Make sure to not apply the lubricant to threaded part.
3.28 With reference to Figure 10 Detail Q Step 8.1, secure the rod assy P/N 4F5510A00232 to the tailplane LH fitting by means of bolt P/N 8G5510A02252, a washer P/N MS20002C7, a washer P/N NAS1149C0732R and a nut P/N MS17825-7.
3.29 With reference to Figure 10 Detail Q Step 8.2, torque the nut to 5.0÷20.0 Nm;
lock the nut by means of cotter pin P/N MS24665-302.
3.30 With reference to Figure 10 Detail R Step 8.3, install a washer P/N A994A51N035K, a washer P/N 4F5510A09151 and a washer P/N A864A1151F030H in the indicated position of the tailplane RH fitting.
CAUTION Apply Titanite JC5A lubricant to the shank of the bolt.
Make sure to not apply the lubricant to threaded part.
3.31 With reference to Figure 10 Detail R Step 8.3, secure the RH rod assy to the tailplane RH fitting by means of bolt P/N 8G5510A02252, a washer P/N MS20002C7, a washer P/N NAS1149C0732R and a nut P/N MS17825-7.
3.32 With reference to Figure 10 Detail R Step 8.4, torque the nut to 5.0÷20.0 Nm;
lock the nut by means of cotter pin P/N MS24665-302.
3.33 Check the tailplane installation: If excessive movement of the tailplane assy is experienced, it is allowed to adjust the LH rod assy P/N 4F5510A00232 by unlocking the pitch link sleeve and rotating it to increase the overall length of the rod. Lock the pitch link sleeve rotation by means of installed nuts and lock washers. Safety the nuts on the rod by means of lock wire P/N MS20995C42.
3.34 In accordance with AMP DM 89-A-06-41-00-00A-010A-A, install the access panels 321A and 322A.
4. In accordance with weight and balance changes, update the Chart A (see Rotorcraft Flight Manual, Part II, section 6).
5. Send the attached compliance form to the following mail box:
pse_aw189.mbx.aw@leonardocompany.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.