Copy · Leonardo ASB 189-195 · 23 pages

© Leonardo S.p.A. Filed by the FAA in regulations.gov docket FAA-2020-0215; AD 2020-15-18 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '9d2e04aec6a12a38a4d19e2afb4b3eb62ef7c59a5e102b4607947ea414b38877'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

N° 189-195 DA TE: August 30, 2018 REV. : / - / Pa ge 1 of 22 TITLE ATA 95 – EFS AFT FLOAT ASSY INFLATION SYSTEM RESET PR OCEDURE

REVISION LOG First Issue An appropriate entry should be made in the aircraft log book upon accomplishment.

If ownership of aircraft has changed, please, forward to new owner.

Leonardo S.p.A.

Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) Italy Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595 ALERT

SERVICE BULLETIN

S.B. N°189-195 ALERT DATE: August 30, 2018 Page 2 of 22 REVISION: /

1. PLANNING INFORMATION A. EFFECTIVITY SMA inflation system P/N 8G9560V01751 up to S/N 182 included (except S/N 117), in stock or fitted on the float assemblies P/N 8G9560V00331, P/N 8G9560V00431, both installed on AW189 aircraft or kept in stock.

NOTE SMA inflation systems are NOT affected if they have the Service Bulletin SB-189-25-007 marked on the body of the SMA actuation device (pin-puller) P/N P-H20006 (shown in Figure 1 of the SB-189-25-007 in Annex A) even if they have a S/N listed above.

NOTE SMA inflation systems affected are installed on float assemblies (part of kit EFS P/N (8G9560F00111 or P/N 8G9560F00211) with the S/N listed below:

DESCRIPTION P/N S/N AFT LH float assy 8G9560V00331 up to S/N 81 included AFT RH float assy 8G9560V00431 up to S/N 82 included (except S/N 57) This Service Bulletin is not applicable to float assemblies having the Service Bulletin SB-189-25-007 marked on the float assembly log card, even if they have a S/N listed above.

B. COMPLIANCE

• Within forty-five (45) FH since the date of issuance of this Service Bulletin for components installed on AW189 helicopters.

• Before the first installation on the helicopter for components kept in stock.

S.B. N°189-195 ALERT DATE: August 30, 2018 REVISION: / Page 3 of 22 C. CONCURRENT REQUIREMENTS N.A.

D. REASON This Service Bulletin is issued to prescribe a one-off reset procedure of the EFS SMA actuation device.

E. DESCRIPTION Investigation following few cases of inadvertent float deployment led the supplier to find that improper reset may have been performed on the SMA actuation device, leading to a not stable condition of the system. To avoid this possibility an improved reset procedure has been defined and is now used in production and in authorized service stations for overhaul activities.

This Service Bulletin is issued to prescribe the one-off reset of all the inflation systems manufactured and delivered before implementation of the new procedure.

This activity requires the inflation system removal from the AFT float and could be performed by operators entitled to remove/install the float assemblies from the aircraft or by the authorized service stations.

F. APPROVAL The technical content of this Service Bulletin is approved under the authority of DOA nr. EASA.21.J.005. For helicopters registered under other Aviation Authorities, before applying the Service Bulletin, applicable Aviation Authority approval must be checked within Leonardo Helicopters customer portal.

EASA states mandatory compliance with inspections, modifications or technical directives and related time of compliance by means of relevant Airworthiness Directives.

If an aircraft listed in the effectivity embodies a modification or repair not LHD certified and affecting the content of this Service Bulletin, it is responsibility of the Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on the aircraft, for any adaptation necessary before incorporation of the present Service Bulletin.

S.B. N°189-195 ALERT DATE: August 30, 2018 Page 4 of 22 REVISION: / G. MANPOWER To comply with this Service Bulletin the following MMH are deemed necessary:

• one (1) MMH for the reset procedure;

• six (6) MMH to remove and install the AFT float assemblies.

MMH are based on hands-on time and can change with personnel and facilities available.

H. WEIGHT AND BALANCE N.A.

I. REFERENCES

1) PUBLICATIONS

DATA MODULE DESCRIPTION PART DM01 89-A-00-20-00-00A-120A-A Helicopter on ground for a safe maintenance - DM02 89-A-06-41-00-00A-010A-A Access doors and panels - DM03 89-A-95-61-03-00A-520A-A AFT left float assembly - Remove procedure - DM04 89-A-95-61-03-00A-720A-A AFT left float assembly - Install procedure - DM05 89-A-95-61-04-00A-520A-A AFT right float assembly - Remove procedure - DM06 89-A-95-61-04-00A-720A-A AFT right float assembly - Install procedure - DM07 89-A-95-61-05-00A-520A-B Left Bottle assembly – Remove procedure - DM08 89-A-95-61-05-00A-720A-B Left Bottle assembly - Install procedure - DM09 89-A-95-61-06-00A-520A-B Right Bottle assembly – Remove procedure - DM10 89-A-95-61-06-00A-720A-B Right Bottle assembly - Install procedure -

2) ACRONYMS AMDI Aircraft Material Data Information AMP Aircraft Maintenance Publication DM Data Module EFS Emergency Floatation System ITEP Illustrated Tools and Equipment Publication MMH Maintenance Man Hours MMIR Maintenance Malfunction Information Report

S.B. N°189-195 ALERT DATE: August 30, 2018 REVISION: / Page 5 of 22 SMA Shaped Memory Alloy

3) ANNEX Annex A AEROSEKUR SERVICE BULLETIN SB-189-25-007 J. PUBLICATIONS AFFECTED N.A.

K. SOFTWARE ACCOMPLISHMENT SUMMARY N.A.

S.B. N°189-195 ALERT DATE: August 30, 2018 Page 6 of 22 REVISION: /

2. MATERIAL INFORMATION A. REQUIRED MATERIALS N.A.

1) PARTS N.A.

2) CONSUMABLES Refer to AMDI for the consumable required to comply with the AMP DM referenced in the compliance instructions and to paragraph 2.A of SB-189-25-007 in Annex A.

3) LOGISTIC MATRIX N.A.

B. SPECIAL TOOLS Refer to ITEP for the special tools required to comply with the AMP DM referenced in the compliance instructions and to paragraph 2.B of SB-189-25-007 in Annex A.

C. INDUSTRY SUPPORT INFORMATION In order to allow all Customers to accomplish this Service Bulletin within the relevant compliance time and to minimize the impact on their operations, Leonardo Helicopters has developed a dedicated distribution plan for the specific tools according to the geographical distribution of the involved Customers and taking into account the average utilization profile of the associated helicopters. Given that, Leonardo Helicopters kindly invite all the potentially affected Customer / Operator / Service Centre to get in contact with their usual Leonardo Helicopters Logistic Administrator to receive instructions about the purchase policy for this Service Bulletin.

S.B. N°189-195 ALERT DATE: August 30, 2018 REVISION: / Page 7 of 22

3. ACCOMPLISHMENT INSTRUCTIONS

GENERAL NOTES Place an identification tag on all components that are re-usable, including the attaching hardware that has been removed to gain access to the modification area and adequately protect them until their later re-use.

NOTE Skip steps 1 and 2 if the affected inflation system is installed on an AFT float assembly kept in stock.

Skip steps 1 thru 3 if the affected inflation system is kept in stock.

1. In accordance with AMP DM 89-A-00-20-00-00A-120A- A prepare the helicopter on ground for a safe maintenance. Disconnect the battery, all electrical power sources and/or the external power supply.

NOTE Apply following step 2 on LH float assembly or RH float assembly or both float assemblies in accordance with the effectivity.

2. In accordance with AMP DM 89-A-95-61-03-00A-520A- A and/or AMP DM 89-A-95-61-04-00A-520A-A remove the AFT left and/or AFT right float assembly.

3. In accordance with AMP DM 89-A-95-61-05-00A-520A-B and/or DM 89-A-95-61-06-00A-520A-B remove the inflation system from the relevant AFT left and/or AFT right float assembly.

WARNING

PRIOR TO ACCOMPLISH THE RESET PROCEDURE AT FOLLOWING STEP 5, ENSURE TO HAVE SEEN

AND UNDERSTOOD ALL THE INSTRUCTIONS

SHOWN IN THE SELF-TRAINING VIDEO TUTORIAL,

AVAILABLE ON LEONARDO WEBPORTAL AND ON AEROSEKUR WEBPORTAL.

IF DOUBT EXISTS, PLEASE CONTACT AEROSEKUR TO:

PRODUCT-SUPPORT@SEKUR.AERO.

4. Perform the inflation system reset procedure acco rding to paragraph 3 of SB-189-25-007 in Annex A.

S.B. N°189-195 ALERT DATE: August 30, 2018 Page 8 of 22 REVISION: /

5. Record for compliance with Service Bulletin SB-189-25-007 on the inflation system pinpuller according to paragraph 3 of SB-189-25-007 in Annex A.

NOTE Steps 6 thru 9 are not required if the inflation system must be kept in stock.

CAUTION Replacement of the inflation system with another one not compliant with this Service Bulletin is not allowed.

6. In accordance with AMP DM 89-A-95-61-05-00A-720A- B and/or AMP DM 89-A-95-61-06-00A-720A-B install the inflation system on the relevant AFT left and/or AFT right float assembly.

7. Record for compliance with Service Bulletin SB-189-25-007 on the AFT float assembly logcard.

NOTE Following steps 8 and 9 are not required if the AFT float assembly must be kept in stock.

8. In accordance with AMP DM 89-A-95-61-03-00A-720A- A and/or AMP DM 89-A-95-61-04-00A-720A-A reinstall the AFT left and/or AFT right float assembly removed at step 2.

9. Return the helicopter to flight configuration and record for compliance with this Service Bulletin on the helicopter logbook.

10. Send the attached compliance form to the following mail box:

pse_aw189.mbx.aw@leonardocompany.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”

ANNEX A S.B. N°189-195 ALERT DATE: August 30, 2018 REVISION: / Page 9 of 22

ANNEX A AEROSEKUR SERVICE BULLETIN SB-189-25-007

Page 10OCROpen in PDF

ANNEX A ~ AERO SEKUR SERVICE BULLETIN SB-189-25-007 - Revision No.1 28 June 2018

HIGHLIGHTS

REVISION TRANSMITTAL This sheet transmits Revision 1 to SB-189-25-007, which:

A. Change the Inspection and Modification paragraph with the addition o caution notes and information in case reset procedure fails (identified b revision bar).

NOTE: This revision replaces the original issue of SB-189-25-007 in its entirety.

REVISION COMPLIANCE NO EFFECT. SMA Inflation System P/N 311086A (LHD P/N 8G9560V01751) previously modified by the original issue of this Service Bulletin are not affected by this revision.

LOG OF REVISIONS Original Issue 28 May 2018 Revision 1 28 June 2018 S.B. N°189-195 ALERT DATE: August 30, 2018 Page 10 of 22 REVISION: /

Page 11OCROpen in PDF

ANNEX A

• AERO SEKUR SERVICE BULLETIN SB-189-25-007 - Revision No.1 28 June 2018

HIGHLIGHTS

PAGE INTENTIONALLY BLANK S.B. N°189-195 ALERT DATE: August 30, 2018 REVISION: / Page 11 of 22

Page 12OCROpen in PDF

ANNEX A

• AERO SEKUR SERVICE BULLETIN SB-189-25-007 - Revision No.1

1. PLANNING INFORMATION A. TITLE ATA 25 - Equipment Furnishings - Emergency Flotation System (EFS) - Mandatory inspection of actuation device P/N P-H20006.

B. EFFECTIVITY This Service bulletin affects each SMA Inflation System P/N 311086A (LHD P/N 8G9560V01751) up to S/N 182 included (except S/N 117), in stock or fitted on the Float Assemblies of the following table, both installed on AW189 helicopters or kept in stock.

Table 1 lists the part numbers of Emergency Flotation Systems for AW189 Helicopter equipped with the SMA Inflation systems affected.

DESCRIPTION LHD P/N AERO SEKUR P/N S/N AFT Left Float Assy 8G9560V00331 310635A Up to S/N 81 included AFT Right Float Assy 8G9560V00431 310636A Up to S/N 82 included (except S/N 57) Table 1 - Emergency Flotation System equipped with SMA Inflation System P/N 311086A The Inflation System of Float Assemblies indicated above are NOT affected by this Service Bulletin only in case the Service Bulletin is already marked:

On the Float Assembly Log Card;

On the body of the SMA Actuation Device (Pin-Puller) P/N P-H20006 (Figure 1).

In case an affected Inflation System is replaced with an another one already compliant with this Service Bulletin, the "SB-189-25-007" has to be recorded on the Float Assembly Log Card, together with the Inflation System P/N and S/N. Replacement of the Inflation System with an another one not compliant with this Service Bulletin is not NOTE: LHD stands for Leonardo S.p.A. Helicopters (formerly Finmeccanica S.p.A., AgustaWestland S.p.A.).

Original Issue - 28 May 2018 SB-189-25-007 Revision No.1 - 28 June 2018 Page 1 of 11 ERO SEKUR SpA, Customer Support, via delle Valli, 04011, Aprilia(LT), ITALY, +39.06.97634000, Fax +39.06.928284 mail: publications@sekur.aer S.B. N°189-195 ALERT DATE: August 30, 2018 Page 12 of 22 REVISION: /

Pages 13–23 of 23