Copy · Leonardo Helicopters Emergency ASB No. 412-178 · 11 pages

© Leonardo S.p.A. Filed by the FAA in regulations.gov docket FAA-2025-0017, the docket of AD 2025-03-03. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '42f39348a1e9de6c16bad82f12caf5dccbdf25c30b593d01f22575bba301e5bc'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1 of 10 N° 412-178 DATE: November 27, 2024 REV. : / - March 15, 2017 TITLE ATA 25 – EXTERNAL HOIST CABLE, BALL END INSPECTION

REVISION LOG First Issue Leonardo S.p.A.

Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) Italy Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595 An appropriate entry should be made in the aircraft log book upon accomplishment.

If ownership of aircraft has changed, please, forward to new owner.

EMERGENCY ALERT

SERVICE BULLETIN

S.B. N°412-178 EMERGENCY ALERT DATE: November 27, 2024 Page 2 of 10 REVISION: /

1. PLANNING INFORMATION A. EFFECTIVITY NOTE Please refer to the Log Card of the rescue hoist assy to take the data required below. Refer to:

 Section 1 for the manufacturing date;

 Sections 2 and 3 for the repaired / overhauled operations details and the external hoist cable replacement details.

Please refer also to EASA Form 1, FAA Form 8130-3 or any other equivalent Authorised Release Certificate document of the rescue hoist assy to take the information regarding the organization that performed the last repair or overhaul operation on the component (refer to block 4 of the document).

All the following rescue hoist assemblies:

 P/N BL10300-all dash;

 P/N BL20200-all dash or P/N BL-20200-all dash;

installed on AB412 helicopters or kept in stock, in the following conditions:

 manufactured by Breeze -Eastern before April 8th, 2024 and that have never replaced the external hoist cable since the delivery from Breeze Eastern;

 repaired or overhauled by Breeze -Eastern in Whippany (New Jersey) before April 8th, 2024 and that have never replaced the external hoist cable since the latest delivery from Breeze Eastern.

B. COMPLIANCE Before the next rescue hoist operation.

C. CONCURRENT REQUIREMENTS N.A.

D. REASON This Service Bulletin is consequence of a quality escape from the rescue hoist assy supplier (Breeze Eastern), about the detection of a potential damage of the ball end terminal fitting of the external hoist cable, which connects the external hoist cable and the hook assy.

S.B. N°412-178 EMERGENCY ALERT DATE: November 27, 2024 REVISION: / Page 3 of 10 The damage has been caused by a testing tool used on the new and the repaired and overhauled rescue hoist assemblies. That testing tool has been replaced on April 2024, but a batch of rescue hoist assemblies delivered from Breeze Eastern main facility (in Whippany, New Jersey) may be affected.

Leonardo Helicopters issued this Service Bulletin in order to perfo rm a one-off visual inspection of the external hoist cable ball end and to replace the affected components (refer to Breeze Eastern SB MS20664C3) E. DESCRIPTION This Service Bulletin provides the necessary instructions to perform a detai led visual inspection of the ball end of the external hoist cable and to replace the external hoist cable in case of unserviceable conditions detection.

F. APPROVAL The technical content of this Service Bulletin is ap proved under the authority of DOA nr. EASA.21.J.005. For helicopters registered under other Aviation Authorities, before applying the Service Bulletin, applicable Aviation Authority approval must be checked within Local Aviation Authority.

EASA states mandatory compliance with inspections, modifications or technical directives and related time of compliance by means of relevant Airworthiness Directives.

If an aircraft listed in the effectivity embodies a modification or repair not Leonardo Helicopters certified and affecting the content of this Service Bulletin, it is responsibility of the Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on the aircraft, for any adaptation necessary before incorporation of the present Service Bulletin.

G. MANPOWER To comply with this Service Bulletin , approximately two (2) MMH are deemed necessary (ONLY for the inspection procedure).

MMH are based on hands -on time and can change with per sonnel and facilities available.

S.B. N°412-178 EMERGENCY ALERT DATE: November 27, 2024 Page 4 of 10 REVISION: / H. WEIGHT AND BALANCE N.A.

I. REFERENCES I.1 PUBLICATIONS AB412-MM Maintenance Manual AB412-IPC Illustrated Part Catalogue AB412EP-IPC Illustrated Part Catalogue Refer also to Breeze Eastern SB MS20664C3 I.2 ACRONYMS & ABBREVIATIONS AR As Required CSAM Customer Support Account Manager DOA Design Organization Approval EASA European Union Aviation Safety Agency FAA Federal Aviation Administration IPC Illustrated Part Catalogue LH Leonardo Helicopters MEK Methyl-Ethyl-Ketone MM Maintenance Manual MMH Maintenance Man Hours MMIR Maintenance Malfunction Information Report N.A. Not Applicable P/N Part Number S/N Serial Number I.3 ANNEX N.A.

J. PUBLICATIONS AFFECTED N.A.

K. SOFTWARE ACCOMPLISHMENT SUMMARY N.A.

S.B. N°412-178 EMERGENCY ALERT DATE: November 27, 2024 REVISION: / Page 5 of 10

2. MATERIAL INFORMATION A. REQUIRED MATERIALS A.1 PARTS # P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTES LOG P/N 1 BL10300-all dash or BL20200-all dash or BL-20200-all dash Rescue hoist assemblies Ref. .

2 BL6260-all dash or BL-9149-all dash Wire rope assembly AR .. (1)

Refer also to AB412-MM for the spare parts required to comply with the MM Paragraphs referenced in the accomplishment instructions.

A.2 CONSUMABLES The following consumable materials, or e quivalent, are necessary to accomplish this Service Bulletin:

# SPEC./LHD CODE NUMBER DESCRIPTION Q.TY NOTE PART 3 ASTM D740, TYPE I / Code No.999999999000007983 Methyl-ethyl-ketone - MEK (C309) AR (2) - 4 Commercial Soft lint-free cloth AR (2) -

A.3 LOGISTIC MATRIX N.A.

NOTES

(1) This item has to be ordered in q.ty 1 ONLY if the inspected one is unserviceable and it must be ordered directly to Breeze Eastern. Please refer to the Paragraph

2.C Industry Support Information of this Service Bulletin.

(2) Item to be procured as local supply.

B. SPECIAL TOOLS The following special tools, or equivalent, are necessary to accomplish this Service Bulletin:

# P/N DESCRIPTION Q.TY NOTE PART 5 Commercial Light source AR (B1) - 6 Commercial Magnifying glass (10 power) AR (B1) -

Refer also to ITEP for the special tools required to comply with the MM DMs referenced in the accomplishment instructions.

S.B. N°412-178 EMERGENCY ALERT DATE: November 27, 2024 Page 6 of 10 REVISION: /

SPECIAL TOOLS NOTES (B1) Item to be procured as local supply.

C. INDUSTRY SUPPORT INFORMATION A replacement external hoist cable will be provided free of charge by Breeze Eastern upon Customer’s request to Breeze Eastern directly.

Contact Breeze Eastern Customer Services below:

Breeze-Eastern Corporation Phone Number (973) 602-1083, or (973) 602-1090 35 Melanie Lane 1-800-929-1919 (Toll-Free US and Canada only) Whippany, New Jersey 07981-1638 USA Fax Number (973) 739-9344 E-Mail: customerservices@breeze-eastern.com Web Site: www.breeze-eastern.com As alternative, refer to the direct point of contact Alexander Pappas at the following mail: APappas@Breeze-Eastern.com.

ONLY if Breeze Eastern reject the request, please contact your Leonardo Helicopter CSAM sending the Breeze Eastern communication and the documents requested below:

 the Inspection Report Form in Figure 2 completed in every part;

 a picture of the inspected area,  a copy of the Log Card of the inspected rescue hoist assy;

 a copy of the EASA Form 1, FAA Form 8130 -3 or any other equivalent Authorised Release Certificate document of the inspected rescue hoist assy.

Only if confirmed by your Leonardo Helicopters’ CSAM, please Issue relevant MMIR form to your Warranty Administration Dpt. including the required documentation.

If the required documentation is not provided, the relevant MMIR will be rejected.

Owners/operators who comply with the instructions of this Service Bulletin no later than the applicable date in the “Compliance” section will be eligible to receive required materials on free of charge basis, except for Consumable Materials and Special Tools.

NOTE: Customers who fail to comply with the instructions in this Service Bulletin before the compliance date are not eligible for the aforementioned special policy.

S.B. N°412-178 EMERGENCY ALERT DATE: November 27, 2024 REVISION: / Page 7 of 10

3. ACCOMPLISHMENT INSTRUCTIONS

GENERAL NOTE Place an identification tag on all components that are reusable, including the attaching hardware that has been removed to gain access to the modification area and adequately protect them until their later re-use.

1. In accordance with AB412-MM Maintenance Manual, prepare the helicopter on ground for a safe maintenance. Disconnect the battery, all electrical power sources and/or the external power supply.

NOTE To properly inspect the ball end of the external hoist cable, it is necessary to remove the hook assy.

2. In accordance with AB412-MM Maintenance Manual Section 25-91-01, remove the hook assembly from the external hoist cable.

3. With reference to Figure 1, perform the detailed visual inspection of the external hoist cable, as described in the following procedure:

3.1 Using a soft lint -free cloth and the Methyl-ethyl-ketone - MEK (C309), clean the ball end of the external hoist cable.

NOTE Gouging damage is defined as a removal of surface material characterized by rough and deep depressions.

NOTE Slight scratches on the ball end, due to the moveme nt of the hook assy, are normal.

3.2 With reference to Figure 1 Detail A, using a light source and a magnifying glass (10 power), check for presence of gouging (of any dimension) in the highlighted area of the ball end of the external hoist cable.

3.2.1 If the inspected area presents gouging, the external hoist cable is unserviceable. Proceed as follow:

3.2.1.1 Compile and send the Inspection Report Form in Figure 2;

3.2.1.2 In accordance with AB412-MM Maintenance Manual Section 25 - 91-00 Para 8-5, remove the unserviceable external hoist cable;

S.B. N°412-178 EMERGENCY ALERT DATE: November 27, 2024 Page 8 of 10 REVISION: /

3.2.1.3 In accordance with AB412 -MM Maintenance Manual Sectio n 25- 91-00 Para 8-6, install a new serviceable external hoist cable and proceed to step 4.

3.2.2 If the inspected area does not present gouging, the external hoist cable is serviceable . In accordance with AB412 -MM Maintenance Manual Section 25 -91-01, re-install the h ook ass embly on the serviceable external hoist cable.

4. Return the helicopter to flight configuration and record for compliance with this Service Bulletin on the helicopter logbook and on the relevant Log Card of the hoist assembly as applicable.

5. Gain access to My Communications section on Leonardo Customer Portal and compile the “Service - Technical Bulletin Application”.

As an alternative, send the attached compliance form to the following mailbox:

absereng.aw@leonardo.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.

 Non cancellare mai questo segnalibro Non cancellare mai interruzione sezione

Figure 1 S.B. N°412-178 EMERGENCY ALERT DATE: November 27, 2024 REVISION: / Page 9 of 10

(1) Slight scratches due to the movement of the hook assy are normal.

IF ANY GOUGING (OF ANY DIMENSION) IS PRESENT ON THE INSPECTED AREA OF

THE BALL END OF THE EXTERNAL RESCUE HOIST WIRE ROPE ASSEMBLY, THE

EXTERNAL RESCUE HOIST WIRE ROPE ASSEMBLY IS UNSERVICEABLE

FOR REFERENCE ONLY

UNSERVICEABLE

DETAIL A

AREA TO BE INSPECTED ON THE BALL END OF THE EXTERNAL

RESCUE HOIST WIRE ROPE ASSEMBLY

SERVICEABLE

Figure 2 S.B. N°412-178 EMERGENCY ALERT DATE: November 27, 2024 Page 10 of 10 REVISION: /

SB 412-178 Rev. / – INSPECTION REPORT FORM DATE

HELICOPTER S/N

CUSTOMER

RESCUE HOIST ASSY

P/N S/N ☐ BL10300-all dash NOTE: write the part number with the dash.

☐ BL20200-all dash NOTE: write the part number with the dash.

PICTURE OF THE

INSPECTED AREA (REF. TO FIGURE 1 DETAIL A)

NOTES:

Remarks:

Information:

SERVICE BULLETIN COMPLIANCE FORM Date:

Number:

Revision:

Please send to the following address:

Telephone:

Fax:

B.T. Compliance Date:

Customer Name and Address:

Helicopter Model S/N Total Number Total Hours T.S.O.

LEONARDO S.p.A.

CUSTOMER SUPPORT & SERVICES - ITALY PRODUCT SUPPORT ENGINEERING & LICENSES DEPT.

Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) - ITALY Tel.: +39 0331 225036 Fax: +39 0331 225988 We request your cooperation in filling this form, in order to keep out statistical data relevant to aircraft configuration up-to-date. The form should be filled in all its parts and sent to the above address or you can communicate the application also via Technical Bulletin Application Communication Section placed in Leonardo AW Customer Portal - MyCommunications Area. We thank you beforehand for the information given.