Copy · SB 382-57-94 · 8 pages

© LOCKHEED MARTIN CORPORATION. Filed by the FAA in regulations.gov docket FAA-2014-0779; AD 2015-18-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextOCR

This text is OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'cbbda20b343ca268105caf0db88c3f9318ac8b0c7e6228cdef1257bc51f0868d'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

HERCULES Lockheed Martin Aeronautics Company Marietta, Georgia 30063

SERVICE BULLETIN

WINGS - REPLACEMENT OF CENTER WING

1. PLANNING INFORMATION A. EFFECTIVITY This Service Bulletin is applicable to all model 382, 382B, 382E, 382F, and 382G series FAA Certificated Hercules aircraft (excluding 382J series aircraft).

B. REASON

(1) The 14 CFR Part 26, Subpart C Aging Aircraft Safety - Widespread Fatigue Damage rule became effective on January 14, 2011. In compliance with this rule, Lockheed Martin Aeronautics Company established a Limit of Validity (LOV) for 382 series aircraft, published in Section VII of customer specific Service Manual Publication (SMP) 515-C Inspection Programs. 14 CFR Part 121 or Part 129 operators must have incorporated the LOV into their maintenance program by July 14, 2013 to comply with FAR §121.1115 or §129.115. This Service Bulletin presents a maintenance action required for the center wing to safeguard the aircraft against widespread fatigue damage up to the LOV.

Widespread Fatigue Damage (WFD) is general degradation of large areas of structure with fatigue cracks manifesting and growing simultaneously at similar structural details and stress levels. Fatigue damage is increasingly likely as the airplane is operated and aged, and without intervention, WFD is likely to compromise the structural integrity of the airplane. Structural fatigue characteristics of airplanes are understood only up to the point where analyses and testing of the structure are valid. The purpose of this action is to replace the center wing box currently installed on the affected aircraft with a wing box of new manufacture prior to the on-set of WFD in the

(3) For those aircraft with less than 50,000 Center Wing Flight Hours, Lockheed Martin Aeronautics Company recommends replacement of the center wing prior to the accumulation of 50,000 Center Wing Flight Hours.

(4) For those aircraft with more than 50,000 Center Wing Flight Hours, the aircraft should be grounded until the replacement of the center wing is accomplished.

(5) Aircraft that have incorporated Service Bulletin SB 382-57-90 conform to the intent of this Service Bulletin and do not need to accomplish the modifications specified herein.

NOTE: The replacement times indicated in this Service Bulletin do not apply to military operators of 382, 382B, 382E, 382F, and 382G aircraft. Contact Lockheed Martin for an Operational Usage Evaluation/Service Life Assessment to determine an appropriate replacement schedule.

NOTE Lead time for the purchase of a center wing box of new construction is approximately 24 months. Lockheed Martin Aeronautics Company contact information can be found in Paragraph 1.F.

EXPORT CONTROLLED INFORMATION WARNING - This document contains data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) as amended, or the Export Administration Act (Title 50, U.S.C., App 2401 et seq.) as amended. Violations of these export laws are subject to severe criminal and civil penalties.

OPRIETARY INFORMATION.

December 3, 2013 382-57-94 Page 1 of 8

Page 2OCROpen in PDF

HERCULES Lockheed Martin Aeronautics Company Marietta, Georgia 30063

SERVICE BULLETIN NOTE: Plumbing, fuel, electrical, hydraulic, flight control components, and system components are the responsibility of the owner/operator. Limited salvage information can be found in the applicable customer Maintenance Manual or Illustrated Parts Catalog NOTE: These work instructions refer to methods, techniques, and practices described in other Lockheed Martin Aeronautics Company documents. When the words "refer to" are used and the operator has other acceptable methods, techniques, and practices (including tools, equipment, and test equipment) those procedures may be used to complete the work. When the words "in accordance with" are included in the instruction, the methods, techniques, and practices (including tools, equipment, and test equipment) specified in the Lockheed Martin Aeronautics Company document must be used.

C. DESCRIPTION This Service Bulletin provides instructions for replacing the center wing structure on affected aircraft.

D. APPROVAL

(1) The aircraft owner/operator will make an appropriate entry in the aircraft log records upon compliance with this Service Bulletin.

(2) After the work has been completed on each affected aircraft, please complete and mail or fax (770-494-5682) a Notice of Service Bulletin Compliance; or notify Lockheed Martin Aeronautics Company of compliance with this Service Bulletin at website address:

http://www.lockheedmartin.com/eoc and log into Data Library.

(3) This Service Bulletin has been approved by the FAA as complying with applicable Federal Aviation Regulations.

E. MANPOWER The work prescribed in this Service Bulletin has not been performed at the Lockheed Martin facility.

Therefore, the manpower estimates provided have not been validated, and should not be construed as being acceptable for use in making fixed price quotes for accomplishment of the work. These estimates are provided only as a convenience for customer planning purposes. It is estimated that approximately 4,800 manhours (a crew of 11 men) will be required to accomplish the work described herein on each affected aircraft. This will take approximately two months elapsed time while the aircraft is out of NOTE: This Service Bulletin is based upon the configuration of the aircraft as it was delivered from Lockheed Martin Aeronautics Company. Previous service bulletins issued by Lockheed Martin Aeronautics Company have been considered in the preparation of this Service Bulletin, but no consideration has been given to peculiar changes made to the aircraft by the owner/operator or the US Government since its delivery.

382-57-94 USE. COPYING, AND/OR DISCLOSURE IS GOL ON THE TITLE PAGE OF THIS DOCUMENT. December 3, 2013 Page 2

Page 3OCROpen in PDF

HERCULES Lockheed Martin Aeronautics Company Marietta, Georgia 30063

SERVICE BULLETIN F. MATERIAL - COST AND AVAILABILITY

(1) Kits 3366300-1, -3, -5, -7, -9, -11, -13, -15, -17, -19, -21, -23, or -25 listed in Paragraph 3, required for each affected aircraft, are available from Lockheed Martin Aeronautics Company.

Parts bearing Lockheed Martin Aeronautics Company part numbers are considered proprietary and shall be purchased from Lockheed Martin Aeronautics Company unless methods of fabrication are shown in this publication. Inquiries concerning current prices, applicability, and availability of kits may be directed to the following:

MAIL: Lockheed Martin Aeronautics Company C-130 Commercial Contracts Department F532 Zone 0195 86 South Cobb Drive Marietta, GA 30063-0195, USA TELEPHONE: (770) 494-5165 FAX: (817) 655-9700

(2) Additional bulk materials, not included in the kit, will be supplied by the aircraft owner/operator.

G. TOOLING - PRICE AND AVAILABILITY The following tooling is required and will be obtained through the applicable supply source:

Quantity Part Number Nomenclature 2 C26942100 Center Wing Tooling Tower C26942100-201 Exterior Tooling Tower 1 C26942100-202 Exterior Tooling Tower C26942100-219 Tooling Tower Locating Plate 1 C26942100-405 Wing End Gate 1 C26942100-406 Wing End Gate C26942100-434 Angle Fitting 2 C26942100-440 Aft Fuselage Tie Down Fitting C26942100-501 FS 517 Cross Brace 1 C26942100-502 FS 597 Cross Brace 2 C26942100-503 FS 457 / FS 637 Cross Brace C26942100-519 Cross Brace End Bracket C26942100-520 Cross Brace End Bracket C26942100-537 Cross Brace End Bracket C26942100-538 Cross Brace End Bracket December 3, 2013 USE, COPYING, AND/OR DISCLOSURE IS GOV ON THE TITLE PAGE OF THIS DOCUMENT 382-57-94 Page 3

Page 4OCROpen in PDF

HERCULES Lockheed Martin Aeronautics Company Marietta, Georgia 30063

SERVICE BULLETIN Quantity Part Number Nomenclature 2 C26942100-546 MLG Tie Down Fitting C26942100-564 End Gate Positioner Assembly C26942100-565 End Gate Roller Assembly C26942102 Internal Scaffold C26942103 Cradle, Center Wing C26942104 Sling H. WEIGHT AND BALANCE Due to the nature of the center wing replacement, the actual weight and balance changes, resulting from the instructions herein, cannot be accurately determined. Therefore, the aircraft must be weighed in accordance with the applicable aircraft Weight & Balance Manual.

REFERENCES Hercules Maintenance Manual, SMP581 Lockheed Martin Aeronautics Company Drawings 3365454, 3366300, 398298 J. OTHER PUBLICATIONS AFFECTED Hercules Corrosion Prevention and Control Manual Hercules Illustrated Parts Catalog Hercules Structural Repair Manual Hercules Wiring Diagram Manual 382-57-94 USE. COPYING, AND/OR DISCLOSURE IS GOVERNED BY THE RESTRICTIVE LEGEND ON THE TITLE PAGE OF THIS DOCUMENT. December 3, 2013 Page 4

Page 5OCROpen in PDF

HERCULES Lockheed Martin Aeronautics Company Marietta, Georgia 30063

SERVICE BULLETIN

2. ACCOMPLISHMENT INSTRUCTIONS This Bulletin identifies the action, designates the aircraft affected, provides applicable planning information, and identifies the parts, materials, and drawings required for installation. This modification will be accomplished in accordance with Lockheed Martin Aeronautics Company Top Kit Drawing 3366300 and Installation Procedures Drawing 3365454.

WARNING: OBSERVE ALL APPLICABLE SAFETY PRECAUTIONS WHILE ACCOMPLISHING THIS MODIFICATION. ENSURE THAT ALL ELECTRICAL AND HYDRAULIC POWER

SOURCES ARE OFF, THE BATTERY AND EXTERNAL ELECTRICAL POWER

DISCONNECTED, AND HYDRAULIC SYSTEMS DEPRESSURIZED BEFORE STARTING THE WORK. FAILURE TO COMPLY MAY RESULT IN SERIOUS INJURY OR DEATH.

NOTE: In case of any discrepancy between these instructions and Installation Procedures drawings, the actual drawings shall take precedence.

A. Unload replacement center wing. Refer to Drawing 3365454 Chapter I, Paragraph A for instructions.

B. Prepare aircraft for maintenance and align aircraft. Refer to Drawing 3365454 Chapter II, Paragraph A.

and Drawing 398298 for instructions.

C. Level aircraft. Refer to Drawing 3365454 Chapter II, Paragraph B for instructions.

D. Shore aircraft internally in accordance with Drawing 3365454 Chapter II, Paragraph C.

E. Replace MLG Main Frame at Fuselage Station 517 in accordance with Drawing 3365454 Chapter II, Paragraph D F. Remove old wing in accordance with Drawing 3365454 Chapter II, Paragraph E.

G. Prepare fuselage for installation of new wing in accordance with Drawing 3365454 Chapter II, Paragraph F.

H. Prepare new wing for installation in accordance with Drawing 3365454 Chapter II, Paragraph G.

Install new wing in accordance with Drawing 3365454 Chapter II, Paragraph H.

J. Perform operational checks (if specified equipment is installed) of disturbed equipment. Refer to applicable Hercules Maintenance Manual (or equivalent approved operator procedures) for instructions.

K. Perform functional check flight of modified aircraft.

L. Restore aircraft to service.

NOTE If assistance is needed, contact your local Lockheed Martin Aeronautics Company Representative, or the Enterprise Operations Center - Technical Support in Marietta, Georgia, USA, as follows:

TELEPHONE: (770) 494-9131 FAX: (770) 494-9122 E-MAIL: hercules.support@lmco.com MAIL: Lockheed Martin Aeronautics Company 86 South Cobb Drive Dept. 3E1M, Zone 0591 Marietta, GA 30063, USA December 3, 2013 USE, COPYING, AND/OR DISCLOSURE IS GOL ON THE TITLE PAGE OF THIS DOCUMENT 382-57-94 Page 5

Page 6OCROpen in PDF

HERCULES Lockheed Martin Aeronautics Company Marietta, Georgia 30063

SERVICE BULLETIN THIS PAGE INTENTIONALLY LEFT BLANK.

382-57-94 USE. COPYING, ANDIOR DISCLOSURE IS GOVERNED BY THE RESTRICTNVE LEGEND ON THE TITLE PAGE OF THIS DOCUMENT. December 3, 2013 Page 6

Page 7OCROpen in PDF

HERCULES Lockheed Martin Aeronautics Company Marietta, Georgia 30063

SERVICE BULLETIN

3. MATERIAL INFORMATION NOTE: Lockheed Martin Aeronautics Company Top Kit Drawing Installations 3366300-1, -3, -5, -7, -9, -11, -13, -15, -17, -19, -21, -23, or -25 will detail aircraft modifications required to facilitate replacement of aircraft center wing and structure.

The following kits will be provided by the aircraft owner/operator and are required to modify FAA-Certificated aircraft listed in Paragraph 1.A. Kits may be obtained from Lockheed Martin in accordance with Paragraph 1.F.

NOTE: Drawings and diagrams necessary for installation are listed with the Kit.

NEW PART INSTRUCTIONS/

NUMBER QUANTITY KEY WORD DISPOSITION 3366300-1 1 Top Kit - Center Wing Replacement, FAA Note 1 3366300-3 1 Top Kit - Center Wing Replacement, FAA Note 2 3366300-5 1 Top Kit - Center Wing Replacement, FAA Note 3 3366300-7 Top Kit - Center Wing Replacement, FAA Note 4 3366300-9 1 Top Kit - Center Wing Replacement, FAA Note 5 3366300-11 1 Top Kit - Center Wing Replacement, FAA Note 6 3366300-13 1 Top Kit - Center Wing Replacement, FAA Note 7 3366300-15 1 Top Kit - Center Wing Replacement, FAA Note 8 3366300-17 1 Top Kit - Center Wing Replacement, FAA Note 9 3366300-19 1 Top Kit - Center Wing Replacement, FAA Note 10 3366300-21 1 Top Kit - Center Wing Replacement, FAA Note 11 3366300-23 1 Top Kit - Center Wing Replacement, FAA Note 12 3366300-25 1 Top Kit - Center Wing Replacement, FAA Note 13 NOTE 1. Applies to center wings installed on Serials 3946 and 4134.

2. Applies to center wings installed on Serials 4144, 4147, 4208, and 4248.

3. Applies to center wings installed on Serials 4299 through 4302, 4355, and 4358.

4. Applies to center wings installed on Serials 4383, 4385, 4388, 4472, 4475, and 4512.

5. Applies to center wings installed on Serials 4562 and 4565.

6. Applies to center wings installed on Serials 4582, 4590, 4600, 4606, and 4610.

7. Applies to center wings installed on Serials 4673, 4676, 4684, 4691, 4695, and 4698.

8. Applies to center wings installed on Serials 4706, 4710, and 4715.

December 3, 2013 USE, COPYING, AND/OR DISCLOSURE IS GOL 382-57-94 Page 7

Page 8OCROpen in PDF

HERCULES Lockheed Martin Aeronautics Company Marietta, Georgia 30063

SERVICE BULLETIN

9. Applies to center wings installed on Serials 4763, 4796, 4798 through 4800, 4828, 4834, 4850, 4851, and 4853.

10. Applies to center wings installed on Serials 4886, 4889, 4891, 4893, and 4895.

11. Applies to center wings installed on Serials 4923, 4950, 4952, 4954, 4956, 4957, 4960, 4992, 5000, 5022, 5024, 5025, 5027, 5032, 5048, 5055, 5056, and 5225

12. Applies to center wings installed on Serials 4951, 4953, and 4955.

13. Applies to center wings installed on Serials 5306, 5307, and 5320.

# File: I-3684 382-57-94 USE. COPYING, AND/OR DISCLOSURE IS GOVERNED BY THE RESTRICTIVE LEGEND ON THE TITLE PAGE OF THIS DOCUMENT. December 3, 2013 Page 8