Service bulletin · Pacific Aerospace

Revision 1U.S. DOT/FAA - Service Information · 4 pages · 354 KB

© Pacific Aerospace. Filed by the FAA in regulations.gov docket FAA-2011-0379; AD 2011-09-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2011-0379 (document 0002) · AD 2011-09-08

Manufacturer
Pacific Aerospace
Type
Mandatory Service Bulletin
Number
PACSB/XL/050
Latest revision known
PACSB/XL/050, Issue 1, dated December 15, 2010

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Text · 4OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Pacific Aerospace. Filed by the FAA in regulations.gov docket FAA-2011-0379; AD 2011-09-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '0eb6c7cc322e87f282a587412e94811e0961c42a9741549a5698ccf242463e2c'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

PACIFICAEROSPACE

MANDATORY SERVICE Pacific Aerospace Limited Airport Road, Hamilton Private Bag 3027, Hamilton 3240, New Zealand TEL +847843 6144 FAX +647 843 6134 EMAIL pacific@aerospace.co.nz PACSB / XL / 050 WEB www.aerospace.co.nz ISSUE 1

RUDDER PEDAL WELD ASSEMBLY

1. PLANNING INFORMATION A. EFFECTIVITY All Pacific Aerospace Limited 750XL aircraft up to S/N XL 111 B. REASON Possibility of cracks forming around the welds on the Rudder Pedal Weld Assemblies, at the rudder cable pulley.

C. DESCRIPTION There have been instances of cracks being N found on the end of the pedals where the welded rudder cable pulley is located on early 750 XL aircraft. Check the areas around the weld with a dye penetrating crack detection process. If there are any signs of cracking being present, a repair scheme needs to be incorporated.

D. COMPLIANCE The aircraft should be inspected immediately. If there are any signs of cracks greater than ¼ inch, the aircraft should not be flown and repair scheme PAC/XL/0461 incorporated. Aircraft found with cracks less than ¼ inch should be monitored weekly and repair scheme PAC/XL/0461 incorporated at next 150 hour Inspection.

E. APPROVAL By the delegated authority.

F. TOOLING No special tools are required.

G. WEIGHT AND BALANCE Negligible weight change.

H. REFERENCE P750 XL Maintenance Manual Ch 27-20-00 PAL Drawing 11-03221/22 HOURS REQUIRED 4 hours Labour Issued: 15 December 2010 Page 1 of 4

Page 2OCROpen in PDF

PACIFICAEROSPACE PACSB / XL / 050 ISSUE 1

2. ACCOMPLISHMENT INSTRUCTIONS Inspection of Rudder Pedal Weld Assembly A. Method:

1) The rudder pedal weld assembly should be checked around the welds, at the rudder cable pulley, using a dye penetration technique. An example of the potential cracking is shown in Figure 1.

Site of potential cracking

RUDDER PEDAL WELD ASSEMBLY

1) Remove Rudder Pedal assembly IAW P750XL Maintenance Manual, Chapter 27-20-00.

It may be possible to carry out the repair in situ.

2) Carry out repair of Rudder Pedal Weld Assemblies IAW PAC/XL/0461 (refer to Drawing 11-03221/22).

3) Upon completion of the repair, install Rudder Pedal assembly IAW P750XL Maintenance Manual, Chapter 27-20-00.

Page 2 of 4 Issued: 15 December 2010

Page 3OCROpen in PDF

PACIFICAEROSPACE PACSB / XL / 050 ISSUE 1

3. CERTIFICATION Record compliance with this bulletin in the aircraft Log Book.

NZCAA are aware of this Service Bulletin and an emergency AD is anticipated.

4. MATERIAL REQUIRED:

Description Part Number Qty Required LEVER ASSY LH 11-03221-5 LEVER ASSY RH 11-03222-6 REPAIR TUBE LH 11-03221-16 REPAIR TUBE RH 11-03222-17 1 BOLT NAS6203-20 4 WASHER AN960-10 4 NUT MS21042L3 4 ADHESIVE SEALANT AMS-S8802 A/R Issued: 15 December 2010 Page 3 of 4

Page 4OCROpen in PDF

PACIFICAEROSPACE PACSB / XL / 050 ISSUE 1

INTENTIONALLY LEFT BLANK Page 4 of 4 Issued: 15 December 2010