Service bulletin · Pacific Aerospace

Revision 1DCA-750XL-31_PACSB-XL-101 issue 1 Fireproof Wiring Penetrations · 6 pages · 232 KB

© Pacific Aerospace. Filed by the FAA in regulations.gov docket FAA-2019-0566; AD 2020-15-19 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2019-0566 (document 0003) · AD 2020-15-19

Manufacturer
Pacific Aerospace
Type
Mandatory Service Bulletin
Number
PACSB/XL/101
Latest revision known
PACSB/XL/101, Issue 1, dated May 9, 2018

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 6

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Pacific Aerospace. Filed by the FAA in regulations.gov docket FAA-2019-0566; AD 2020-15-19 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'fcee64cda059c12854a715eae835c945309eac9198b4898f250297e9bc923daa'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Issued: 0

1. P

A. E

B. R

C. D

D. C

E. A

F. T

G. W

H. R

I. H

J. W

09 May 2018

LANNING

EFFECTIVIT REASON

DESCRIPT

COMPLIAN

APPROVAL

TOOLING

WEIGHT AN

REFERENC

HOURS RE

WARRANTY 8 FIREP

G INFORMA TY ION NCE L

ND BALANC CE

EQUIRED

Y COVER

PROOF W ATION CE WIRING ALL S/N

Duri A/C ineff

This proc seal com Tube

With

By d

N/A.

No c

PAL

8 Ho

Norm MAN

G PENET 750XL airc

221.

ng a revie w Loom (P/N fective firew s Servic e cedures t o ing by ponents es, Fireslee hin 300 hr.

delegated a .

change.

L Drawing P ours.

mal Warran P A NDATO TRATIO craft up to a w of the In s 11-81021) wall sealing w e Bullet o improve installatio (Firewall eve and Hos uthority.

/N 11-8102 ty condition

ACSB / XL IS ORY S ONS nd including stallation M a possibilit was identifi tin provi the fire w on of n Penetra se Clip).

21-4, 11-807 ns apply.

L / 101 SSUE 1 Page 1 o SERVI g Main y of ed.

des wall new tion 701 of 6 CE B U L L E T I N

Pa

2.

A.

age 2 of 6 ACCOM Main Lo

N

1) R e si

2) R e

3) R e

4) R e

5) P r ho m th

6) C th lo

7) F i ex th fir

MPLISHM oom OTE: S e cu emove the de of the fir F emove and emove and emove any  If cha f informa  If no c h rotect the l ole to 1.37 method is n o hrough the f ut and split he firewall.

om.

it two firew a xtend past t he loom. If resleeve to

ENT INST ealant man re times, an upper eng rewall, (adja FIGURE 1 retain the Q discard the excess sea fing or an y ation;

hafing / dam oom and s 5” diamete ot successf firewall.

t a 3” lengt h The firesle e all penetrat the end of t the loom i s wrap furthe

TRUCTION ufacturer’s nd use instr ine cowl to acent to the FIREWA Qty 4 screw e two stainle alant from th y damage mage are pre surrounding

r. This ma y ul it may b e h of fireslee eve should tion tubes a he tube. En s loose in t er around th NS storage, h ructions mu o get acces s e relay box,

ALL (MAIN L ws on the fir ess plates a he loom an are pres e esent, cont g equipmen y be achie e necessar eve and wra d be wide e around the nsure the fir the firewall he loom.

M health pre c ust be obeye s to the wi r if fitted) (Se

LOOM AND A rewall loom and fireslee d inspect th ent on Lo o inue on Ste t and care f ved using ry to disco n ap the loom enough to w firesleeve rewall pene penetration ADAS Main Loom PA cautions, m ed.

ring loom f e ee Figure 1)

ADAS) feedthroug ve material he loom for om, conta c ep 5).

fully enlarg a small de nnect and p near where wrap at le a allowing 0.2 tration tube n tubes us e

ACSB / XL IS Issued: 09 M minimum eed thru o n ).

gh.

l.

chafing.

ct PAL fo r e the fire w eburring to o pass the lo o re it passes ast 1.5x ar o 25” of fire s es will secur e a wider l L / 101 SSUE 1 May 2018 n the LH r further wall loom ol. If this om back through ound the sleeve to rely hold ength of

Issued: 0

8)

9) 10 11 12 13 14

09 May 2018 ) Slide t h 4 Screw

FIG ) Apply s

0) Cut an tubes. T

1) Apply s tubes a

2) Apply s

3) If an A D

4) Install t

8 he Firewall ws retained GURE 2 sealant in a d split a 2” The wrappi sealant in th and loom wi sealant at th DAS or DAA the upper e W Ap Sea Penetration earlier (Se

FIREWALL ny gaps of t long piece ng must be he overlapp ith Qty 2 ho he end of th AM is instal ngine cowl.

FIGUR Wrap 1.5x pply sealant alant n Tubes and ee Figure 2)

L PENETRA

the firewall e of firesle e e at least 1.2 ped areas a ose clamps.

he firesleeve lled carry ou .

RE 3 H O

t d firesleeve .

ATION TUBE side.

eve and wr a 25 times aro and secure t

e (See Figu ut part 2.B o

OSE CLAMP Fir pene tu along the l

ES AND FIRE ap the loo m ound the loo the sleeve t re 3).

of this bulle PS rewall etration ubes Wrap Apply PACSB loom and se

ESLEEVE m and firew a om without to the firew etin.

1.25x (mini sealant to o B / XL / 10 ISSUE Page 3 o ecure with Q all penetrat any gaps.

all penetrat mum) overlap 01 E 1

of 6 Qty tion tion

Pa B.

age 4 of 6 ADAS/D

If a se p shown i

A) Sing

1)

2)

3)

4)

5)

6)

7)

8)

9)

10)

11)

12)

13)

14)

DAAM Loo parate loo m in Figure 1) gle Piece T Remove t firewall.

Remove feedthroug Remove a Remove a  If ch a inform  If no c

If required Disconnec Attach the Apply a s the firewa Slide the clamps.

) Apply sea ) Reconne c ) Refit the i n ) Refit the u ) Carry out m (if instal FIGURE m penetrati o , carry out t Tube he LH, Ce n and disca r gh. Retain a and discard any excess afing or a n mation;

chafing / da d, enlarge th ct the ADAS e firewall tub mall amoun ll penetratio outer fire s alant at the e ct the ADAS nstrument p upper engin functional t lled) 4 ADA on is used the procedu ntre, & RH rd the Qty attachment the two sta sealant from ny damag e amage are p he firewall h S wires and be to the fire nt of sealin g on tube.

leeve over end of the fi S wiring.

panel(s).

e cowl.

ests on all d

AS WIRING P for the A D ures A) or B instrument 4 screws washers an ainless plate m the loom e are pre s present, con hole to acce d route throu ewall using g compoun r the firew a firesleeve (S disturbed sy

PENETRATI DAS or D A B) below:

panels as on the A nd nuts.

es and phen and inspec sent on L o ntinue on St ept the firew ugh the firew screws and nd to the in all penetrat i See Figures ystems.

PA

ON AAM engin e required to DAS or D A nolic spacer ct the loom f om, conta c tep 5).

wall tube wall tube & d retained w ner fireslee on tube a n s 3 and 4).

ACSB / XL IS Issued: 09 M e trend sy s gain acces AAM firew a

r.

for chafing.

ct PAL fo r firesleeve.

washers and eve and sli d nd secure L / 101 SSUE 1 May 2018 stem (as ss to the all loom r further

d nuts.

de it into with the

Issued: 0

B)

6 7 8 9 1 1 1 1

3. C R

09 May 2018 ) Split Tub

1) Re m

2) Re m feed

3) Re m

4) Re m  

5) Cut

6) If requi

7) Attach

8) Split t h compo penetra

9) Split t h loom a

10) Apply s

11) Refit t h

12) Refit t h

13) Carry o

ERTIFICA ecord comp 8 be move the LH move and d dthrough. R move and di move any ex If chafing information If no chafin the firewall red, enlarge the firewall he inner fi und to split ation tube.

he 1” OD o nd the firew sealant at th he instrumen he upper en out functiona ATION pliance with

H, instrumen discard th e etain attach scard the tw xcess seala or any d a n;

ng / damage penetration FIGURE e the firewa tube to the resleeve a seam and outer firesle wall penetra he end and nt panel(s).

gine cowl.

al tests on a h this Servic nt panel to g e Qty 4 s c hment wash wo stainless ant from the amage ar e e are presen n tube into 2 5 ADA all hole to ac e firewall usi along its l e outside of eeve along tion tube an split seam

all disturbed ce Bulletin in gain access crews on t hers and nu s plates and loom and i e present o nt, continue 2 pieces as

AS SPLIT TU ccept the fir ing screws ength and the fireslee its length a nd secure w of the firesl d systems.

n the Aircra s to the firew the ADAS ts.

d phenolic s nspect the on Loom, e on Step 5) shown in F

UBE rewall tube.

and retaine apply a s eve. Slide th and wrap t h with the clam eeve (See ft Log Book PACSB wall.

or DAAM spacer.

loom for ch contact P A ).

Figure 5.

ed washers small amo u he sleeve in he fireslee v mps.

Figures 3 a

k.

B / XL / 10 ISSUE Page 5 o firewall lo hafing.

AL for furt and nuts.

unt of seal nto the firew ve around and 4).

01 E 1

of 6 om her ing wall the

Pa

4.

age 6 of 6 MATER Main Lo Descrip FIREWA FIRESL HOSE C SEALIN FIREWA ADAS o Descrip FIREWA OR FIREWA FIRESL METHO METHO HOSE C SCREW SEALIN FIREWA * Sugge S-AS10 ** Alter

RIAL REQ oom Firewa ption

ALL PENET LEEVE (-18 CLIP

NG COMPO ALL or DAAM F ption

ALL TUBE

ALL TUBE LEEVE 3/8”

OD A) FIRE

OD B) FIRE CLIP WS

NG COMPO ALL ested Manu 072-M029-X size to suit QUIRED:

all penetra

TRATION T or larger)

OUND AIRC Firewall pen

- (SINGLE)

- (SPLIT) ID SLEEVE 5/ SLEEVE 1”

OUND AIRC facturers P/ X-X.

loom if req ation P TUBES 1 S N

CRAFT A netration (i P ) 1 O 1 S 26 /8”ID S ”ID S N A

CRAFT A /N Stratofle uired.

Part Numbe 1-81857-2 SAE AS1072 NAS1922-01 AMS3374 or f fitted) Part Numbe 1-81865-1 OR 1-81865-2 SAE AS1072 650-06 SAE AS1072 SAE AS1072 NAS1922-01 AN525-832R AMS3374 or ex Firesleev er / Specific 2 * 150-3H** r MIL-S-382 er / Specific 2 * 2 * / 2650-1 2 * / 2650-1 100-3H R6 r MIL-S-382 ve 2650-XX, PA cation 249 cation 0 6 249 , A-B Therm

ACSB / XL IS Issued: 09 M Qty Req 2 12 2 A/ Qty Req

1 2 2 2 2 4 A/ mal Technol L / 101 SSUE 1 May 2018 quired 2 2” 2 /R quired 1 2” 2” 2” 2 4 /R logies