TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'f1e07ded912b44be1b6b1f53046a3cc1888888746c6da1fecb3f9fe71c585b3b' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'f1e07ded912b44be1b6b1f53046a3cc1888888746c6da1fecb3f9fe71c585b3b' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
PIAGGIO AERO INDUSTRIES S.p.A. in A.S.
Via Pionieri e Aviatori d’Italia snc - 16154 Genoa, Italy Product Support Department
Original Issue: Aug. 10th, 2017
Service Bulletin: 80-0430 Rev.N. 2 Date: July 20th, 2021 Page: 1 of 16 EXPORT CONTROL COMPLIANCE: This document might contain controlled technology subject to national and inter national Export Control Restrictions; retransfer is prohibited unless previously authorized by Piaggio Aero Industries S.p.A. in A.S.
Mod. D007_ed_3 The EASA states mandatory compliance with inspections, modifications or technical directives and related time compliance by means of relevant Airworthiness Directives.
SERVICE BULLETIN (MANDATORY) N.: 80-0430 REV.2 ATA CHAPTER: 30-30 MODIFICATION N.: 80-1283; 80-1394 TITLE: TAT PROBE HEATER - INHIBITION ON GROUND
REVISION STATUS OF THE BULLETIN This MANDATORY Service Bulletin (MSB) is at Revision status 2 and consists of 16 pages, plus Confirmation Slip (1 page).
This Service Bulletin is revised to:
▪ update publications affected (§ 1.N.);
▪ minimally update the system operational test (§ 2.)
▪ update the material information (§ 3.A.);
▪ update format and content to current Piaggio Aerospace publication standards.
This Revison supersedes the previous issue of this Service Bulletin.
No further action is required to operators that have already accomplished to the previous issue of this Service Bulletin The parts which are affected by this revision are shown by a black bar in the right margin of the page.
1. PLANNING INFORMATION A. EFFECTIVITY Piaggio A ero Ind. (PAI) P180 Avanti II Manufacturer’s Serial Number (MSN): 1002;
1105 thru 1234 and 3001 thru 3007.
B. CONCURRENT REQUIREMENTS PAI modification no. 80 -1089 “P180: New Nose Landing Gear System ” and no. 80 - 1131 “P180: New Main Landing Gear System” or modification no. 80 -1300 “Update of NLG Leg and MLG Leg (with S/A) P/Ns due to minor improvements” (or relevant Service Bulletins no. 80-0425 or no. 80-0454): embodied.
C. REASON This MANDATORY Service Bulletin provides in structions to modify the TAT heater circuit in order to inhibit its engagement on ground when Pitot heater is turned ON.
Revision history:
Revision 1 (dated April 30 th, 201 9) was issued to extend the effectivity , update the compliance, the accomplishment instructions and the material information.
PIAGGIO AERO INDUSTRIES S.p.A. in A.S.
Via Pionieri e Aviatori d’Italia snc - 16154 Genoa, Italy Product Support Department
Original Issue: Aug. 10th, 2017
Service Bulletin: 80-0430 Rev.N. 2 Date: July 20th, 2021 Page: 2 of 16 EXPORT CONTROL COMPLIANCE: This document might contain controlled technology subject to national and inter national Export Control Restrictions; retransfer is prohibited unless previously authorized by Piaggio Aero Industries S.p.A. in A.S.
Mod. D007_ed_3 D. DESCRIPTION General This MANDATORY Service Bulletin consists of the following:
▪ removal of interiors in the flight compartment area (FR 0);
▪ installation of relay support;
▪ installation of new terminal juction boards;
▪ installation of new relay;
▪ modification of TAT heater electrical connections;
▪ installation of the relevant label on the cockpit instrument panel;
▪ installation of interiors in the flight compartment area.
E. COMPLIANCE This MANDATORY Service Bulletin shall be accomplished within 6 60 Flight-Hours (FH) or 24 months from April 30th, 2019 (whichever occurs first).
In compliance with this Service Bulletin, please complete the attached Confirmation Slip and send it back to Piaggio Aero Industries S.p.A. – Product Support Department.
F. APPROVAL The technical content of this Service Bulletin has been approved under the Authority of the DOA ref. EASA.21J.220.
G. MANPOWER This MANDATORY Service Bulletin shall be accomplished in approximately : 30 manhours (MH).
NOTE: estimated man -hours do not include time necessary for removal/installation of interiors furnishing and to return the aircraft to a flyable status.
H. TECHNICAL INFORMATION For questions concerning the technical content of this SB, please contact:
Piaggio Aero Industries – P180 Customer Support via Pionieri e Aviatori d’Italia, snc - 16154 Genoa, Italy technicalsupport@piaggioaerospace.it (+39) 331 679 74 93 I. MATERIAL – COST AND AVAILABILITY For pricing, availability and scheduling, please contact:
PIAGGIO AERO INDUSTRIES S.p.A. in A.S.
Via Pionieri e Aviatori d’Italia snc - 16154 Genoa, Italy Product Support Department
Original Issue: Aug. 10th, 2017
Service Bulletin: 80-0430 Rev.N. 2 Date: July 20th, 2021 Page: 3 of 16 EXPORT CONTROL COMPLIANCE: This document might contain controlled technology subject to national and inter national Export Control Restrictions; retransfer is prohibited unless previously authorized by Piaggio Aero Industries S.p.A. in A.S.
Mod. D007_ed_3
- for customers and operators in Europe, Asia and RoW spareparts@piaggioaerospace.it comm-civ@piaggioaerospace.it (+39) 335 810 59 20
- for customers and operators in the Americas spares@piaggioamerica.com (+1) 561 253 0104 (+1) 561 683 5513 J. TOOLING – COST AND AVAILABILITY Not applicable.
K. WEIGHT AND BALANCE Not changed.
L. ELECTRICAL LOAD DATA No effect.
M. REFERENCES Document Title Document Number Chapter/Section Airplane Maintenance Manual (AMM) 180-MAN-0200-01105 180-MAN-0200-01105(E) 07-10-00 08-20-00 11-30-00 20-10-02 20-20-01 24-00-00 25-10-00 33-20-00 35-20-00 33-41-00 53-10-00 53-60-00 Illustrated Parts Catalogue (IPC) 180-MAN-0100-01103 180-MAN-0100-01103(E) 25-28-01 25-28-04 25-28-08 25-28-84 Wiring Manual (WM) 180-MAN-0150-01104 180-MAN-0150-01104(E) 29-30-00 30-30-00 Airplane Flight Manual (AFM) 180-MAN-0010-01100 Section 4 – Normal Procedures
PIAGGIO AERO INDUSTRIES S.p.A. in A.S.
Via Pionieri e Aviatori d’Italia snc - 16154 Genoa, Italy Product Support Department
Original Issue: Aug. 10th, 2017
Service Bulletin: 80-0430 Rev.N. 2 Date: July 20th, 2021 Page: 4 of 16 EXPORT CONTROL COMPLIANCE: This document might contain controlled technology subject to national and inter national Export Control Restrictions; retransfer is prohibited unless previously authorized by Piaggio Aero Industries S.p.A. in A.S.
Mod. D007_ed_3 N. PUBLICATIONS AFFECTED The affected manual(s) will be updated at the next regular revision.
Document Title Document Number Chapter/Section Illustrated Parts Catalogue (IPC) 180-MAN-0100-01103 Rev.F0 180-MAN-0100-01103(E) Rev.D1 11-30-00
PIAGGIO AERO INDUSTRIES S.p.A. in A.S.
Via Pionieri e Aviatori d’Italia snc - 16154 Genoa, Italy Product Support Department
Original Issue: Aug. 10th, 2017
Service Bulletin: 80-0430 Rev.N. 2 Date: July 20th, 2021 Page: 5 of 16 EXPORT CONTROL COMPLIANCE: This document might contain controlled technology subject to national and inter national Export Control Restrictions; retransfer is prohibited unless previously authorized by Piaggio Aero Industries S.p.A. in A.S.
Mod. D007_ed_3
2. ACCOMPLISHMENT INSTRUCTIONS Procedure
(1) Lift the aircraft on jacks (ref. to AMM TASK 07-10-00-500-801).
(2) Remove the internal electrical power (ref. to AMM TASK 24-00-00-000-801).
(3) Remove the Pilot and Copilot seats (ref. to AMM TASK 25-10-000-801).
(4) Remove the flight compartment furnishing and get access to the structural panels behind the instruments (ref. to AMM TASK 25-10-00-000-803 and to Fig. 1).
(5) Remove the Pilot Central Panel (ref. to AMM TASK 31-10-00-000-805).
Fig. 1 - Cockpit furnishing removal
(6) Position the relay support P/N 81-111191-001 in its installation area (ref. to Fig. 2)
(7) Mark in the structural central panel no. 2 holes existing on relay support P/N 81 -111191- 001 (ref. to Fig. 2).
(8) Drill on structural central panel no. 2 holes previously marked.
(9) Deburr the holes previously drilled.
(10) Install on structural central panel inner surface (copilot side) the relay support P/N 81 - 111191-001 using no. 2 screws P/N NAS1802 -06-6, no.2 washers P/N NAS1149DN816K and no. 2 nuts P/N MS21042-06 (ref. to Fig. 2)
PIAGGIO AERO INDUSTRIES S.p.A. in A.S.
Via Pionieri e Aviatori d’Italia snc - 16154 Genoa, Italy Product Support Department
Original Issue: Aug. 10th, 2017
Service Bulletin: 80-0430 Rev.N. 2 Date: July 20th, 2021 Page: 6 of 16 EXPORT CONTROL COMPLIANCE: This document might contain controlled technology subject to national and inter national Export Control Restrictions; retransfer is prohibited unless previously authorized by Piaggio Aero Industries S.p.A. in A.S.
Mod. D007_ed_3
(11) Install on relay support P/N 81-111191-001 the relay socket P/N M12883/55 -02 and the relay P/N M83536/37-003 (K6001) (ref. to Fig. 2).
Fig. 2 – Relay support/Relay installation
(12) Disconnect from pin “J” of Terminal Junction TJ6050 the wire number: 2930 -0072A- UU22--G (ref. to Fig. 3).
(13) Disconnect from connector P4076 pin “n” the wire number F025B16 or 3030-0003A- UU16—D (ref. to Fig. 4a/4b).
(14) Disconnect from connector P4075 pin “n” the wire number F026B16 or 3030-0022A- UU16--D (ref. to Fig. 5a/5b).
(15) Connect the wire number 2930 -0072A-UU22--G to pin “N” of Terminal Junction TJ4030 (ref. to Fig. 6).
PIAGGIO AERO INDUSTRIES S.p.A. in A.S.
Via Pionieri e Aviatori d’Italia snc - 16154 Genoa, Italy Product Support Department
Original Issue: Aug. 10th, 2017
Service Bulletin: 80-0430 Rev.N. 2 Date: July 20th, 2021 Page: 7 of 16 EXPORT CONTROL COMPLIANCE: This document might contain controlled technology subject to national and inter national Export Control Restrictions; retransfer is prohibited unless previously authorized by Piaggio Aero Industries S.p.A. in A.S.
Mod. D007_ed_3
(16) Connect the wire number F025B16 (or 3030-0003A-UU16—D) to relay K6001 pin “A3” (ref. to Fig. 7).
NOTE 1: since the cable on board is short, join it with a splice to the cable F025B16 parts of kit P/N 81M000001-401.
(17) Connect the wire number F026B16 (or 3030-0022A-UU16--D) to Terminal Junction TJ4036 pin “F” (ref. to Fig. 8).
NOTE 2: since the cabl e on board is short, join it with a splice to the cable F026B16 P/N 81M000001-401.
(18) Install on board the wire number 3030 -0022B-UU16--D (part of kit P/N 81M000001-401) and connect it from connector P4075 pin “n” to Terminal Junction TJ4036 pin D (ref. to Fig. 8).
(19) Install on board the wire number 3030-0022C-UU16--D (part of kit P/N 81M000001-401) and connect it from Terminal Junction TJ4036 pin “B” to Relay K6001 pin “X1” (ref. to Fig. 8).
(20) Install on board the wire number 3030-0027A-UU20--G (part of kit P/N 81M000001-401) and connect it from Terminal Junction TJ4030 pin “P” to Relay K6001 pin “X2” (ref. to Fig. 7).
(21) Install on board the wire number 3030-0026A-UU16--D (part of kit P/N 81M000001-401) and connect it from connector P4076 pin “n” to Relay K6001 pin “A2” (ref. to Fig. 7).
PIAGGIO AERO INDUSTRIES S.p.A. in A.S.
Via Pionieri e Aviatori d’Italia snc - 16154 Genoa, Italy Product Support Department
Original Issue: Aug. 10th, 2017
Service Bulletin: 80-0430 Rev.N. 2 Date: July 20th, 2021 Page: 8 of 16 EXPORT CONTROL COMPLIANCE: This document might contain controlled technology subject to national and inter national Export Control Restrictions; retransfer is prohibited unless previously authorized by Piaggio Aero Industries S.p.A. in A.S.
Mod. D007_ed_3
Fig. 3 – Nose PSEU electrical coonnections: pre-mod
PIAGGIO AERO INDUSTRIES S.p.A. in A.S.
PIAGGIO Via Pionieri e Aviatori d'Italia snc - 16154 Genoa, Italy AEROSPACE Product Support Department E4013
CENTRAL CTRL PNL P4076 J2 F025B16 E4015 ANNUNCIATOR PNL F007A16 F005B20 +28VDC R STATIC HTR +28VDC AOA PROBE HTR J2 P4080 F015B16 R PITOT/STATIC HTR PWR F016A20 +28VDC R PITOT HTR F025B16 +28VDC TAT SENSOR HTR R PITOT HTR FQ18A22 FQ18A22 R PITOT HTR FAIL F022A22N R PITOT HTR FAIL GND Fig. 4a - Central Control Panel - electrical connections: pre-mod (Part 1 of 2)
• 3030-0003A-UU16--D 3160 214 E4013 CENTRAL CTRL PNL 2110 214 P4076 BKS P4078 +28VDC TAT SENSOR HTR _ +28VDC R PITOT HTR _ R PITOT/STATE HIR PWR. +28VDC R STATIC HTR.J NE • 3030-0006A-UU16--G -5030-0005A-UU16-D +28VDC AOA PROBE HTR. • 3030-0012A-UU20-D• R PITOT HTR FAIL_ • 3030-0013A-UU22--G 9700 R PITOT HTR FAIL GND _ F •3030-0014A-UU22-CG-1 G4004 212 Fig. 4b - Central Control Panel - electrical connections: pre-mod (Part 1 of 2) Original Issue: Aug. 10, 2017 Service Bulletin: 80-0430 Rev.N. 2 Date: July 20h, 2021 Page: 9 of 16 EXPORT CONTROL COMPLIANCE: This document might contain controlled technology subject to national and international Export Control Restrictions; retransfer is prohibited unless previously authorized by Piaggio Aero Industries S.p.A. in A.S.
Mod. D007_ed_3
PIAGGIO AERO INDUSTRIES S.p.A. in A.S.
PIAGGIO Via Pionieri e Aviatori d'Italia snc - 16154 Genoa, Italy AEROSPACE Product Support Department P4079 G4004 : P4075 F019A22 F019A22 L PITOT HTR FAIL
TOTTAZO PITOT HTR F003B18 L PITOT/STATIC HTR PWF F002B20 A AOA PROBE HTR AWF F026B16 TAT SENSOR HTR PWR F004A20 +28VDC L STATIC HTR F023A22N PITOT HTR FAIL GND G4003 :
SP4045 F004A20 SP4046
- F008A20N HR3
L INSTRUMENT P4005 STATIC PORT Fig. 5a - Central Control Panel - electrical connections: pre-mod (Part 2 of 2) 2110 214 J1 P4075 BKS P4075 L PITOT HTR FAIL _ • 3030-0015A-UU22--G- +28VDC L STATIC HTR- c • 3030-0016A-UU20--G 3112 215 BKS P4005 P4005
• 3030-0019A-UU20--G L PITOT/STATIC HTR PWR • 3030-0020A-UU18-D AOA PROBE HIR PWR • 3030-0021A-UU20-D TAT SENSOR HER PWR. = 3030-0022A-UU16-D L PITOT HTR FAIL GND - •3030-0023A-UU22-CG- 9700 211 +28VDC L PITOT HTR. D G4003 Fig. 5b - Central Control Panel - electrical connections: pre-mod (Part 2 of 2) Original Issue: Aug. 10th, 2017 Service Bulletin: 80-0430 Rev.N. 2 Date: July 20th, 2021 Page: 10 of 16 EXPORT CONTROL COMPLIANCE: This document might contain controlled technology subject to national and international Export Control Restrictions; retransfer is prohibited unless previously authorized by Piaggio Aero Industries S.p.A. in A.S.
Mod. D007_ed_3
PIAGGIO AERO INDUSTRIES S.p.A. in A.S.
Via Pionieri e Aviatori d’Italia snc - 16154 Genoa, Italy Product Support Department
Original Issue: Aug. 10th, 2017
Service Bulletin: 80-0430 Rev.N. 2 Date: July 20th, 2021 Page: 11 of 16 EXPORT CONTROL COMPLIANCE: This document might contain controlled technology subject to national and inter national Export Control Restrictions; retransfer is prohibited unless previously authorized by Piaggio Aero Industries S.p.A. in A.S.
Mod. D007_ed_3
Fig. 6 – Nose PSEU electrical connections: post-mod
PIAGGIO AERO INDUSTRIES S.p.A. in A.S.
• PIAGGIO Via Pionieri e Aviatori d'Italia snc - 16154 Genoa, Italy AEROSPACE Product Support Department 2732 3030 225 TJ4030 225 K6001 81-008002 - HYDRAULIC LDG GEAR POSITIO # 3030-0027A-UU20--G F025B16 or *3030-0003A-UU16-D 3160 E4013 CENTRAL CTRL PNL 2110 214 J2 P4076 +28VDC TAT SENSOR HTR • 3030-0026A-UU16--D +28VDC R PITOT HTR 3030-0001A-UU20--G R PITOT/STATIC HTR PWR • 3030-0005A-UU16--D +28VDC R STATIC HTR • 3030-0006A-UU16--G +28VDC AOA PROBE HTR • 3030-0012A-UU20--D R PITOT HTR FAIL _ • 3030-0013A-UU22-G R PITOT HTR FAIL GND - F + 3030-0014A-UU22-CG-911 9700 212 G4004 Fig. 7 - Central Control Panel/Relay K6001 - electrical connections: post-mod (1 of 2) Original Issue: Aug. 10, 2017 Service Bulletin: 80-0430 Rev.N. 2 Date: July 20h, 2021 Page: 12 of 16 EXPORT CONTROL COMPLIANCE: This document might contain controlled technology subject to national and international Export Control Restrictions; retransfer is prohibited unless previously authorized by Piaggio Aero Industries S.p.A. in A.S.
Mod. D007_ed_3