Service bulletin · Pratt & Whitney Canada

Revision 1PT6B-72-39108 · 7 pages · 176 KB

© Pratt & Whitney Canada. Filed by the FAA in regulations.gov docket FAA-2018-0739; AD 2019-22-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2018-0739 (document 0002) · AD 2019-22-03

Type
Service Bulletin
Number
PT6B-72-39108
Latest revision known
PT6B-72-39108, Revision 1, dated September 5, 2017

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 7

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Pratt & Whitney Canada. Filed by the FAA in regulations.gov docket FAA-2018-0739; AD 2019-22-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'b3bec529b190c9628bbe71e8b0108fbf83726b5761d07c451bcb807f6ba8edfc'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

BULLETIN INDEX LOCATOR 72-10-00

TURBOSHAFT ENGINE ROLLER BEARING OPTION (IC), NO. 9 AND 10 POSITIONS - REPLACEMENT OF

MODEL APPLICATION PT6B-37A Commercial Support Program No: 1008510 Compliance: 3 Summary: There have been reports of axial movement of the No. 10 roller bearing inner race.

This Service Bulletin is issued to introduce a new bearing option which uses copper-plated bearings instead of the current bearings.

PRATT & WHITNEY CANADA

SERVICE BULLETIN P&WC S.B. No. 39108 Sep 30/2016 PT6B-72-39108 Cover Sheet

24-Hour Global Service USA & CANADA........................ 1-800-268-8000 Other1-450-647-8000

CFIRST CENTRE International .................... (IAC*)+8000-268-8000 Fax1-450-647-2888

Toll free where available (SIL GEN-027) * International Access Code Web Site .................................. www.pwc.ca

Export Control Classification (X) if Applicable Contains no T echnical Data () Not Subject to the EAR pursuant to 15 CFR 734.7(a)(1) or Not Subject to the ITAR pursuant to 22 CFR 120.11 (NSR) () Jurisdiction and Classification based on Physical Location of the Item.

Location Regulations

EAR ITAR Outside US* NSR NSR * Additionally, refer to the classification under the local export regime where the item is located, as provided in the grid.

U.S. 9E991 NSR

EIPA (ECL) DPA (CG) Canada NSR No

WARNING - PROPRIETARY RIGHTS & EXPORT CONTROLS NOTICE This bulletin contains proprietary information of Pratt & Whitney Canada Corp. ( ″P&WC″), which P&WC provides in confidence and solely for the purposes of supporting engine certification and providing applicable information regarding the proper use, maintenance, inspection, repair, servicing and parts application of P&WC products and services, as directed therein. Neither this bulletin nor any information in it may be disclosed to others, or used for any other purpose, including, without limitation, to design, create, develop, reproduce, manufacture or derive any design, part, product, material, process, modification, configuration change or repair, or obtain FAA or other government approval to do so. Possession and use of this bulletin is also subject to the restrictions set out in P&WC’s T echnical Data Agreement (a copy of which may be obtained by contacting P&WC T echnical Publications). The contents of this bulletin may be subject to export control laws. Unauthorized export or re-export of the bulletin, or parts thereof, is prohibited. By accepting and possessing this bulletin, you agree to be bound by the foregoing terms.

If a Government agency or department intends to disclose any information, written notice should be given to:

VP - Legal Services, Pratt & Whitney Canada Corp., 1000 Marie-Victorin (01BE5), Longueuil, Quebec J4G 1A1.

1. Planning Information A. Effectivity PT6B-37A Engines which are before and include Serial No. PCE-PU0275 and Engine Serial No. PCE-PU0278.

B. Concurrent Requirements This service bulletin supersedes P&WC S.B. No. 39092 and P&WC S.B. No. 39095.

C. Reason

(1) Problem The bearings installed at the number 9 and 10 positions are not optimal.

(2) Cause Friction between the bearing inner race and the gearshaft is not optimal.

(3) Solution Replace the roller bearing with one that has a copper-plated inner ring.

D. Description Replace the roller bearing with a new one at the number 9 and 10 positions.

E. Compliance CATEGORY 3 - P&WC recommends to do this service bulletin within 48 months from SB release date.

F . Approval D.O.T ./D.A.A. approved.

G. Manpower No more man-hours are necessary to include this service bulletin at overhaul.

P&WC No. F0276G, DCR 37283

PRATT & WHITNEY CANADA

SERVICE BULLETIN P&WC S.B. No. 39108 P&WC Proprietary Information. Subject to the restrictions on the back of the locator The export control classification with respect to this document is contained on the back of the locator.Sep 30/2016 PT6B-72-39108 Page 1 of 5© 2016 Pratt & Whitney Canada Corp.

PRINTED IN CANADA

TURBOSHAFT ENGINE ROLLER BEARING OPTION (IC), NO. 9 AND 10 POSITIONS - REPLACEMENT OF

1. Planning Information (Cont’d) H. Weight and Balance For engines Pre-SB39071:

The engine weight will increase by 0.13 pounds (0.06 kgs).

The effect of weight change on the engine center of gravity is negligible.

For engines Post-SB39071:

None.

I. Electrical Load Data Not changed.

J. Software Accomplishment Summary Not applicable.

K. References Overhaul Manual P/N 3053103 (PT6B-37A) Illustrated Parts Catalog P/N 3053104 (PT6B-37A) L. Publications Affected Illustrated Parts Catalog P/N 3053104 (PT6B-37A) M. Interchangeability and Intermixability of Parts Interchangeability - Refer to Para. 2.C.

Intermixability - Not changed.

2. Material Information A. Industry Support Information Refer to Commercial Support Program Notification (CSPN) No. 1008510.

B. Material - Cost and Availability You can get the procurable parts listed in Para. 2.C. from any Pratt & Whitney Canada Parts Distribution Center.

PRATT & WHITNEY CANADA

SERVICE BULLETIN P&WC S.B. No. 39108 P&WC Proprietary Information. Subject to the restrictions on the back of the locator The export control classification with respect to this document is contained on the back of the locator.Sep 30/2016 PT6B-72-39108 Page 2 of 5

TURBOSHAFT ENGINE ROLLER BEARING OPTION (IC), NO. 9 AND 10 POSITIONS - REPLACEMENT OF

2. Material Information (Cont’d) The estimated total cost of new parts needed to replace old parts is $Quote (US, 2016).

The new parts are available.

C. Material Necessary for Each Engine The quantity of materials listed in this section is on a per Engine basis.

New P/N Keyword Old P/N Qty Est. Unit List Price ($US, 2016) Instructions Disposition For Engines Post-SB39071:

Bearing Option (IC) 3310033-04 2 Quote (A)(B) Ê Bearing, Roller, No. 9, 10 3310533-04 Ref.

Ê Bearing, Roller, No. 9, 10 3310233-03 Ref.

3310033-05 Bearing Option (IC) 2 Quote (A) 3310533-05 Ê Bearing, Roller, No. 9, 10 Ref.

3310233-05 Ê Bearing, Roller, No. 9, 10 Ref.

For Engines Pre-SB39071:

Bearing Option (IC) 3310033-03 2 Quote (A)(B) Ê Bearing, Roller, No. 9, 10 3310533-03 Ref.

Ê Bearing, Roller, No. 9, 10 3310433-03 Ref.

Ê Bearing, Roller, No. 9, 10 3310233-03 Ref.

3310033-05 Bearing Option (IC) 2 Quote (A) 3310533-05 Ê Bearing, Roller, No. 9, 10 Ref.

3310233-05 Ê Bearing, Roller, No. 9, 10 Ref.

(A) TWO WAY INTERCHANGEABLE - (ATA 200 Explanation Code 02):

The old or the new part can replace the old or the new part.

(B) Discard.

D. Reidentified Parts None.

PRATT & WHITNEY CANADA

SERVICE BULLETIN P&WC S.B. No. 39108 P&WC Proprietary Information. Subject to the restrictions on the back of the locator The export control classification with respect to this document is contained on the back of the locator.Sep 30/2016 PT6B-72-39108 Page 3 of 5

TURBOSHAFT ENGINE ROLLER BEARING OPTION (IC), NO. 9 AND 10 POSITIONS - REPLACEMENT OF

E. T ooling - Price and Availability Not applicable.

3. Accomplishment Instructions A. Remove the parts in the Old P/N list in Para. 2.C., Material Information, in accordance with the overhaul manual instructions (Ref. 72-10-00 REDUCTION GEARBOX - DISASSEMBLY).

B. Install the parts in the New P/N list in Para. 2.C., Material Information, in accordance with the overhaul manual instructions (Ref. 72-10-00 REDUCTION GEARBOX - ASSEMBLY).

NOTE: Refer to the overhaul manual for new Fits and Clearances.

C. Write the accomplishment of P&WC S.B. No. 39108 in the engine module log book.

4. Appendix A. Refer to Figure 1 for the Roller Bearing part progression.

PRATT & WHITNEY CANADA

SERVICE BULLETIN P&WC S.B. No. 39108 P&WC Proprietary Information. Subject to the restrictions on the back of the locator The export control classification with respect to this document is contained on the back of the locator.Sep 30/2016 PT6B-72-39108 Page 4 of 5

TURBOSHAFT ENGINE ROLLER BEARING OPTION (IC), NO. 9 AND 10 POSITIONS - REPLACEMENT OF

3310033−03 3310233−03 (IC) 3310533−03 (IC) SB39089 CC 7 PRC 02 3310033−04 3310233−03 (IC) 3310533−04 (IC) SB39071 CC 7 PRC 02 3310033−05 3310233−05 (IC) 3310533−05 (IC) SB39108 CC 4 PRC 02 3310033−03 3310233−03 (IC) 3310433−03 (IC) BASIC ICN-00198-G000001514-001-01 Roller Bearing - Part Progression Figure 1

PRATT & WHITNEY CANADA

SERVICE BULLETIN P&WC S.B. No. 39108 P&WC Proprietary Information. Subject to the restrictions on the back of the locator The export control classification with respect to this document is contained on the back of the locator.Sep 30/2016 PT6B-72-39108 Page 5 of 5

TURBOSHAFT ENGINE ROLLER BEARING OPTION (IC), NO. 9 AND 10 POSITIONS - REPLACEMENT OF