Copy · PW SB A6224 Rev7 · 19 pages

© Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2021-0661, the docket of AD 2021-22-19. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '6713c7b13e260655edfdf6cf729bf8db757001c41aed9efe98f3b70d4d7a252d'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

██ ██ ALERT SER VICE

BULLETIN

REVISION NOTICE ENGINE — BLADE, LOW

PRESSURE

TURBINE (LPT) ROT OR, 3RD AND 4TH ST AGE —

INSPECTION FOR SHROUD NOTCH WEAR T urbojet Engine Service Bulletin No.

JT8D A6224 Revision No.

7 dated August 26, 2019 .

Revision History Original Issue October 12, 1995 Revision 1 dated July 3, 1996 Revision 2 dated August 27, 1998 Revision 3 dated May 18, 2000 Revision 4 dated January 17, 2002 Revision 5 dated June 1 1, 2004 Revision 6 dated May 3, 2007 Revision 7 dated August 26, 2019 Reason for the Revision T o add T ables A, B, and C in the Compliance section.

These tables are used to determine when to do this Service Bulletin for the T4 blades.

T o remove Reference 12, NDIP-662, Revision E from the Appendix of this Service Bulletin.

Contact Pratt & Whitney to obtain NDIP-662, Revision E.

T o add a note to Reference

12.

T o revise the compliance hours for the 4th stage turbine blades (T4) throughout this Service Bulletin.

T o add an export control statement.

T o revise part price information.

T o remove the following paragraph:

Although the procedures released by this Service Bulletin have been ef fective in other JT8D engine models, correlation data of notch wear verses torque levels for D-200 engines is very limited and Pratt & Whitney requests operators' participation to develop revised limits based on service experience.

Operators who have developed other criteria for inspecting blades for notch wear should continue their current process in parallel with the new procedures released by this Service Bulletin until correlation is obtained.

T o change the F AA Airworthiness Directive, AD 2005-02-03, to AD 201 1-07-02.

T o add a copy of the AMOC letter dated August 13, 2019 in the Appendix.

Ef fect of Revision on Prior Compliance Operators must review tables A, B, and C, to determine when to do Revision 7 of this Service Bulletin for the T4 blades.

This is a Complete Revision (Not Applicable to the SGML version) The contents are in accordance with the list of ef fective pages.

All pages have the current revision number .

T echnical changes are marked with black bars.

P&W Distribution Code 2627 JT8D A6224 Page 1 of 2 Published in United States of America Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

MODEL

APPLICA TION JT8D-209, -217, -217A, -217C, -219

BULLETIN ISSUE

SEQUENCE JT8D Series 72-1518 Page Revision No.

Date 1 thru 15 7 August 26/19 A copy of this Revision Notice and any future revision notices must be filed as a permanent record with your copy of the subject bulletin.

JT8D A6224 Page 2 Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

██ ██ ALERT SER VICE

BULLETIN ENGINE — BLADE, LOW

PRESSURE

TURBINE (LPT) ROT OR, 3RD AND 4TH ST AGE —

INSPECTION FOR SHROUD NOTCH WEAR MODEL

APPLICA TION JT8D-209, -217, -217A, -217C, -219

BULLETIN ISSUE

SEQUENCE JT8D Series 72-1518 A T A NUMBER 72-53-00

UTC/P&W

PROPRIET AR Y

INFORMA TION This document is the property of United T echnologies Corporation — Pratt & Whitney (UTC/P&W).

Y ou may not possess, use, copy or disclose this document or any information in it, for any purpose, including without limitation to design, manufacture, or repair parts, or obtain F AA or other government approval to do so, without UTC/P&W's express written permission.

Neither receipt nor possession of this document alone, from any source, constitutes such permission.

Possession, use, copying or disclosure by anyone without UTC/P&W's express written permission is not authorized and may result in criminal and/or civil liability .

Export Classification:

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

F AA Airworthiness Directive Directive No.

201 1-07-02 Compliance Category 3 P&W Distribution Code 2627 l October 12/95 JT8D A6224

REVISION NO.

7 - August 26/19 Page 1 of 15 Published in United States of America

Summary Low pressure turbine blade fractures continue to occur and a plan to reduce the probability of operation with excessively worn blade notches was required.

An inspection tool for detecting notch wear has been released for the standard JT8D Engine in Reference 4, Alert Service Bulletin JT8D A5913.

The torque tool was ef fective in detecting worn notches and reducing the number of blade fractures.

Planning Information Ef fectivity Data Engine Models Applicable JT8D-209 Engine Serial No.

— All Engines JT8D-217 Engine Serial No.

— All Engines JT8D-217A Engine Serial No.

— All Engines JT8D-217C Engine Serial No.

— All Engines JT8D-219 Engine Serial No.

— All Engines NOTE :

The notation “All Engines” applied to an engine model indicates that these engine models are no longer being manufactured.

This Service Bulletin is applicable to all of the engines in that model.

Concurrent Requirements There are no concurrent requirements.

Reason

1.

Problem:

Excessively worn LPT blade notches can result in high cycle fatigue (HCF) fractures of the blade and engine in flight shutdowns.

2.

Cause:

Normal engine operating stresses produce wear to the cross-notch hardface surfaces, resulting in reduced blade vibration damping and changes to vibratory modes.

Excessively worn notch surfaces result in increased blade operating stresses that can cause high cycle fatigue fractures of the blade.

3.

Solution:

T o provide a periodic inspection program for detecting excessively worn LPT blade notches and reduce the probability of blade fractures.

Description Perform an inspection of the 3rd and 4th Stage T urbine Blades for the JT8D-209, -217, -217A models and for the 4th Stage T urbine Blades for the JT8D-217C and 219 models.

l October 12/95 JT8D A6224

REVISION NO.

7 - August 26/19 Page 2

UTC/P&W

PROPRIET AR Y

INFORMA TION Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

Compliance Category 3 The time intervals listed in this Service Bulletin are based on limited service data.

Operators who have established other time intervals based on their experience should continue to use their criteria until field experience provides revised limits.

NOTE :

An Alternative Method Of Compliance (AMOC) to AD 201 1-07-02 must be approved by the F AA or local authority if other criteria or time intervals are used.

P AR T 1:

JT8D-209, -217, -217A

ENGINES

(1) Do the Pre Service Bulletin JT8D 5867 (small notch) 3rd T urbine Blade inspection in 6,000 hours since the installation of new blades or by 4,000 hours since installation of refurbished blades.

Inspect again by the Accomplishment Instructions.

OR

(2) Do the Post Service Bulletin JT8D 5867 (large notch) 3rd Stage T urbine Blades by 10,000 hours since installation of new blades, or by 7,000 hours since installation of refurbished blades AND

(3) Do the Pre Service Bulletin JT8D 6029 (small notch) 4th Stage T urbine Blades by 2,000 hours since installation of new blades, or by 2,000 hours since installation of refurbished blades.

OR

(4) Do the Post Service Bulletin JT8D 6029 or JT8D 6308 (large notch) 4th Stage T urbine Blades by 2,000 hours since installation of new blades, or by 2,000 hours since installation of refurbished blades.

P AR T 2:

JT8D-217C, -219

ENGINES

(1) Do the Pre Service Bulletin JT8D 6090 (small notch) 4th Stage T urbine Blades by 2,000 hours since installation of new blades, or by 2,000 hours since installation of refurbished blades.

OR

(2) Do the Post Service Bulletin JT8D 6090 or JT8D 6402 or JT8D 6412 (large notch) 4th Stage T urbine Blades by 2,000 hours since installation of new blades, or by 2,000 hours since installation of refurbished “As-Cast” blades, or by 2,000 hours since installation of refurbished “Modified” blades.

l October 12/95 JT8D A6224

REVISION NO.

7 - August 26/19 Page 3

UTC/P&W

PROPRIET AR Y

INFORMA TION Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

Revision 7 of this Service Bulletin significantly decreases the inspection interval requirements.

The three tables below are used to determine when to do Revision 7 of this Service Bulletin for the T4 blades.

T ABLE A — FOR THE T4 BLADES FOR

ENGINES NOT ON A REPEA T

INSPECTION INTER V AL A T THE

REVISION 7

RELEASE DA TE T otal Hours Since Install (At SB Release Date) Do This Service Bulletin Before:

Less than or equal to 1,900 hours 2,000 hours since install 1,900 < hours < 2,000 100 hours Greater than or equal to 2,000 100 hours T ABLE B — FOR THE T4 BLADES FOR

ENGINES ON A 1,000 HOUR REPEA T

INSPECTION INTER V AL A T THE

REVISION 7

RELEASE DA TE T otal Hours Since Last Inspection (At SB Release Date) Do This Service Bulletin Before:

Less than 450 hours 500 hours since last inspection Greater than or equal to 450 hours 50 hours T ABLE C — FOR THE T4 BLADES FOR

ENGINES ON A 500 HOUR OR 125 HOUR REPEA T

INSPECTION INTER V AL A T THE

REVISION 7

RELEASE DA TE Repeat Inspection Interval (at SB release date) Remove The Engine Within:

500 hour 20 hours 125 hour 20 hours Approval Data The times between inspections specified in the Compliance section and the inspection procedures specified in the Accomplishment Instructions agree with the applicable Federal A viation Regulations and are F AA-Approved for the engine model(s) given.

Revision 7 to this Service Bulletin is approved by the Manager , Engine Certification Of fice, AIR-7E0, by letter dated August 13, 2019 as an Alternative Method Of Compliance (AMOC) to Reference 1 1, Airworthiness Directive No.

201 1-07-02.

Manpower The estimate of man-hours of labor directly necessary to do the intent of this Service Bulletin are as follows:

1.

Replacement Requirements .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

Not Applicable.

2.

Other Items that are Necessary (Inspection of 3rd or 4th Stage T urbine Blades per NDIP-662 , Revision E ) .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

1.0

3.

T otal Necessary Man-hours .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

1.0 W eight Data No Change.

l October 12/95 JT8D A6224

REVISION NO.

7 - August 26/19 Page 4

UTC/P&W

PROPRIET AR Y

INFORMA TION Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

Electrical Load Data Not Applicable.

Software Accomplishment Summary Not Applicable.

References

1.

T urbojet Engine Standard Practices Manual, Part No.

585005.

2.

JT8D-200 Illustrated Parts Catalog, Part No.

773129.

3.

JT8D-200 Engine Manual, Part No.

773128.

4.

Service Bulletin No.

JT8D 5867;

Engine — Blade, T urbine Rotor , 3rd Stage — Replacement of Featuring An Increased Platform Notch Contact Area.

Issue Sequence 72-1367, JT8D Series.

5.

Alert Service Bulletin No.

JT8D A5913;

Engine — Blade, T urbine Rotor , 3rd and 4th Stage — Uncontained Blade Fracture Management.

Issue Sequence A72-1386, JT8D Series.

6.

Service Bulletin No.

JT8D 6029;

Engine — Blade, T urbine Rotor , Fourth Stage — Replacement of.

Issue Sequence 72-1430, JT8D Series.

7.

Service Bulletin No.

JT8D 6090;

Engine — 4th Stage T urbine — Modified T o Increase Shroud Notch Contact Area.

Issue Sequence 72-1430, JT8D Series.

8.

Service Bulletin No.

JT8D 6308;

Engine — Blade, T urbine Rotor , Fourth Stage — Replacement Of.

Issue Sequence 72-1558, JT8D Series.

9.

Service Bulletin No.

JT8D 6402;

Engine — 4th Stage Blade, Low Pressure T urbine — Shot Peening Of Shroud-T o-Airfoil Fillet Radius.

Issue Sequence 72-1603, JT8D Series.

10.

Service Bulletin No.

JT8D 6412;

Engine — Blade, Low Pressure T urbine (LPT), 4th Stage — Replacement Of.

Issue Sequence 72-1607, JT8D Series.

1.

Airworthiness Directive No.

201 1-07-02 .

12.

NDIP-662, Revision E ;

JT8D-200, 3rd and 4th Stage LPT Blade Shroud Cross Notch W ear Mechanical Inspection (Assembled/Aircraft Installed).

NOTE:

NDIP-662 Revision E contains the instructions for using the torque measurement tool kit.

NDIP-662 Revision E has additional torque settings 'measurement and logging' instructions that are superseded by the torque value in the Accomplishment Instructions of SB JT8D A6224 Revision 7 for the T4 blades.

13.

Special Instruction 80F-00;

Engine — Front Compressor Rotor And Stator Assembly , 2nd, 3rd And 4th Stage Low Pressure T urbine Blades — Provide A Modification Procedure T o Incorporate Specification PW A 361 10 Cobalt Base Alloy Coating (T ribaloy T800).

14.

F AA Alternative Means Of Compliance letter dated August 13, 2019.

NOTE :

References 4, thru 10, and 13, are shown to help find configurations in relation to this bulletin.

Publications Changed See the Material Information Part Number Instruction — Disposition codes for cleaning, inspection and repair compatibility between the new and old part number(s).

JT8D-200 Illustrated Parts Catalog, Part No.

773129 l October 12/95 JT8D A6224

REVISION NO.

7 - August 26/19 Page 5

UTC/P&W

PROPRIET AR Y

INFORMA TION Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

72-53-00, Figure 3 JT8D-200 Engine Manual, Part No.

773128 72-53-1 1 72-53-12 72-53-13 Interchangeability Not Applicable.

Information in the Appendix Alternate Accomplishment Instructions (No) Progression Charts (No) Added Data (Y es) Revision to T able of Limits (No) Inspection Procedures (No) l October 12/95 JT8D A6224

REVISION NO.

7 - August 26/19 Page 6

UTC/P&W

PROPRIET AR Y

INFORMA TION Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

Material Information Material — Cost and A vailability

1.

There is no new material cost to do this Service Bulletin if parts do not need to be replaced.

2.

Part prices were not available at the time of Service Bulletin publication.

Contact Pratt & Whitney Spares Management & Logistics for firm quotations.

3.

There is no kit provided to do this Service Bulletin.

4.

Part availability information is provided in material data Instructions — Disposition.

Industry Support Program Not Applicable.

The material data that follows is for each engine.

NOTE :

It is possible to use the Chapter/Section and Figure/Item reference number shown below the old part number to find the part in the Illustrated Parts Catalog.

The material data that follows is for each engine.

NOTE :

All existing 3rd and 4th stage turbine blades must be inspected per the Accomplishment Instructions of this Service Bulletin.

The following list of blade part numbers is provided for the Part Number vs.

Service Bulletin index.

If any 3rd or 4th stage turbine blades are found which are not listed below , those must also be inspected.

Contact your technical support engineer to have those part numbers added to the list below .

For JT8D-209, -217, -217A, -217C, -219 Engines:

New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 88 BLADE —

TURBINE ROT OR, 3 STG 772203 (72-53-00-3-10)

(3)(N) 803003 88 * BLADE —

TURBINE ROT OR, 3 STG 803003 (72-53-00-3-10 B)

(3)(A) 58 BLADE —

TURBINE ROT OR, 4 STG 775404 (72-53-00-3-40)

(3)(N) 58 BLADE —

TURBINE ROT OR, 4 STG 798404 (72-53-00-3-40 A)

(3)(N) 58 BLADE —

TURBINE ROT OR, 4 STG 804304 (72-53-00-3-40 B)

(3)(N) 58 BLADE —

TURBINE ROT OR, 4 STG 810504

(3)(N) l October 12/95 JT8D A6224

REVISION NO.

7 - August 26/19 Page 7

UTC/P&W

PROPRIET AR Y

INFORMA TION Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 58 BLADE —

TURBINE ROT OR, 4 STG 810504-001

(3)(N) 58 BLADE —

TURBINE ROT OR, 4 STG 808904 (72-53-00-3-40 C)

(3)(N) 851704 58 * BLADE —

TURBINE ROT OR, 4 STG 851704 (72-53-00-3-40)

(3) (N) 58 BLADE —

TURBINE ROT OR, 4 STG 821524 (72-53-00-3-40 E)

(3)(N) 822504 58 5,429.00 BLADE —

TURBINE ROT OR, 4 STG 822504 (72-53-00-3-40 F)

(3)(A) 58 BLADE —

TURBINE ROT OR, 4 STG 808904-001 (72-53-00-3-40AA)

(3)(N) 58 BLADE —

TURBINE ROT OR, 4 STG 819104 (72-53-00-3-40AB)

(3)(N) 58 BLADE —

TURBINE ROT OR, 4 STG 819204 (72-53-00-3-40AC)

(3)(N) 58 BLADE —

TURBINE ROT OR, 4 STG 819104-001 (72-53-00-3-40AD)

(3)(N) 58 BLADE —

TURBINE ROT OR, 4 STG 819204-001 (72-53-00-3-40AE)

(3)(N) 58 BLADE —

TURBINE ROT OR, 4 STG 821204

(3)(N) 58 BLADE —

TURBINE ROT OR, 4 STG 821304

(3)(N) 58 BLADE —

TURBINE ROT OR, 4 STG 821404

(3)(N) l October 12/95 JT8D A6224

REVISION NO.

7 - August 26/19 Page 8

UTC/P&W

PROPRIET AR Y

INFORMA TION Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 58 BLADE —

TURBINE ROT OR, 4 STG 821204-001

(3)(N) 58 BLADE —

TURBINE ROT OR, 4 STG 821304-001

(3)(N) 58 BLADE —

TURBINE ROT OR, 4 STG 821404-001

(3)(N) Modification and Spares Information Estimated part prices are provided when they are available at time of publication.

The Estimate of Unit Price is only for planning purposes and does not constitute a firm quotation.

An asterisk (*) is shown where part pricing information was unavailable.

In either case, contact Pratt & Whitney Spares Management & Logistics for firm quotations.

Parts Modification Conditions

(3) Inspect per the Accomplishment Instructions Spare Parts A vailability (A) The new part is available.

(N) The old part is not available.

See Reference

2., Illustrated Parts Catalog, for applicable replacement blades.

Cleaning, Inspection and Repair Information Not Applicable.

V endor Services or Special Components/Materials Not Applicable.

Material Data for Each Spare Engine The material for each spare engine is as stated in the preceding material information section.

Reidentified Parts Not Applicable.

l October 12/95 JT8D A6224

REVISION NO.

7 - August 26/19 Page 9

UTC/P&W

PROPRIET AR Y

INFORMA TION Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

Necessary T ools New Support Equipment that is necessary T ool No.

Name Manufacturer Design A vailability Date Aperture Card Delivery Date PW A 104224 Mechanical Inspection T ool System Pratt & Whitney (See NDIP-662 , Revision E ) PW A 107309 Notch Guage Support Fixture Pratt & Whitney (See NDIP-662 , Revision E ) Support Equipment available before T ool No.

Name Manufacturer LD 3403 Mechanical Inspection T ool System No longer A vailable.

Repairs to be submitted to Pratt & Whitney (See NDIP-662 , Revision E ) NOTE :

A periodic check of the length of the “T” or the “L” end gages, for the 3rd and the 4th stage tools respectively , and of the torque limiting screwdriver must be done periodically or if damage occurs to assure inspection reliability .

Refer to NDIP-662 , Revision E for the inspection interval and repair limits.

NOTE :

T ool systems LD 3403 and PW A 104224 can be used interchangeably .

The LD 3403 tool system may still be used for inspection of the 3rd and 4th stage LPT blades until new tooling is needed.

Refer to NDIP-662 , Revision E for the inspection interval and repair limits.

NOTE :

EXCEPT FOR WORK OR

SUPPLIES T O BE

PERFORMED OR

FURNISHED BY PRA TT &

WHITNEY , IT IS

UNDERST OOD THA T PRA TT &

WHITNEY DOES NOT

ENDORSE THE WORK

PERFORMED BY THE COMP ANY OR COMP ANIES NAMED HEREIN OR ANY OTHER COMP ANY AND DOES NOT ACCEPT

RESPONSIBILITY T O ANY DEGREE FOR THE

SELECTION OF SUCH COMP ANY OR COMP ANIES FOR THE

PERFORMANCE OF ANY WORK OR

PROCUREMENT OF SUPPLIES.

Other Material Information Data Not Applicable.

l October 12/95 JT8D A6224

REVISION NO.

7 - August 26/19 Page 10

UTC/P&W

PROPRIET AR Y

INFORMA TION Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

Pages 13–19 of 19