On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 17
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2023-2523; AD 2024-06-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '0d57630f0b2c247f8336d5c756e025fea8ceb59c7fa17ff19d9852ebaf162705' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '0d57630f0b2c247f8336d5c756e025fea8ceb59c7fa17ff19d9852ebaf162705' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Pratt & Whitney Proprietary Information © 2023.Subject to export control. EAR Export Classification: ECCN 9E991
ENGINE - DISK, HIGH PRESSURE COMPRESSOR (HPC), 8TH STAGE - DO AN INSPECTION OF THE HPC 8TH STAGE DISK FOR MATERIAL ANOMALIES DMC: PW1000G-A-72-00-0197-00A-930A-D | Issue No: 004 | Issue Date: 2023-11-30
ALERT SERVICE BULLETIN REVISION NOTICE Revision History Original Issue (001) March 22, 2023 Issue 002 dated June 19, 2023 Issue 003 dated August 14, 2023 Issue 004 dated November 30, 2023 Reason for the Revision To add "the source of the anomaly is thought to occur during part manufacture." to the Summary.
To change the Compliance Category from "6" to "3" and make SB accomplishment necessary as specified in the Compliance section.
To add NDIP-1260 to the References and the Vendor Services or Special Components/Materials.
To add instructions to clean, visually examine, and do a fluorescent penetrant inspection of the HPC 8th stage disk to the Accomplishment Instructions.
To revise the steps related to NDIP-1260 in the Accomplishment Instructions.
To add Figure 4.
To update this Service Bulletin with changed company names from "Raytheon Technologies Corporation" to "RTX Corporation".
To revise the Problem and Cause for clarity.
Effect of Revision on Prior Compliance None. Where the HPC 8th stage disk has an "SB 72-0197" (PW1500 Program) or "SB 72-0142" (PW1900 Program) mark from completion of an older issue of this Alert Service Bulletin, the intent of the Alert Service Bulletin is complete.
MODEL APPLICATION
Pratt & Whitney Proprietary Information © 2023.Subject to export control. EAR Export Classification: ECCN 9E991 PW1519G, PW1521G, PW1521GA, PW1521G-3, PW1524G, PW1524G-3, PW1525G, PW1525G-3
BULLETIN ISSUE SEQUENCE PW1500G Series 72-00-0197
Pratt & Whitney Proprietary Information © 2023.Subject to export control. EAR Export Classification: ECCN 9E991
ENGINE - DISK, HIGH PRESSURE COMPRESSOR (HPC), 8TH STAGE - DO AN INSPECTION OF THE HPC 8TH STAGE DISK FOR MATERIAL ANOMALIES
RTX/P&W PROPRIETARY INFORMATION This document contains proprietary information of RTX Corporation ("RTX") and/or of one or more of RTX's worldwide divisions, subsidiaries, and affiliates including Pratt & Whitney Canada, Pratt & Whitney, and Collins Aerospace and/or of a supplier and/or partner to any of the foregoing RTX entities. The proprietary information set forth in this document is provided in confidence and solely for the purposes of supporting engine certification and providing applicable information regarding the proper use, maintenance, inspection, repair, and servicing and parts application of Pratt & Whitney engine products and services ("Purpose"). By accepting this document the recipient agrees to limit copying the document, or any information in it, solely for distribution within the recipient's company or to a third party to carry out the stated Purpose for the document and any information in it. You cannot possess, use, copy, or disclose this document or any information in it for any purpose other than that stated above, without RTX's express written permission. Violation of these restrictions may result in criminal and/or civil liability.
Neither this document nor any information in it may be disclosed to others, or used for any other purpose, including, without limitation, to design, create, develop, reproduce, manufacture or derive any design, part, product, material, process, modification, configuration change or repair, or obtain FAA, TCCA or other government approval to do so.
If a Government agency or department intends to disclose any information, written notice should be given to: (1) Intellectual Property Counsel, Pratt & Whitney, 400 Main Street, East Hartford, CT 06118, U.S.A.; (2) VP and Counsel, Commercial Engines, Pratt & Whitney, 400 Main Street, East Hartford, CT 06118, U.S.A.
WARNING: This document contains technical data the export of which is or may be restricted by the Export Administration Act and the Export Administration Regulations (EAR), 15 C.F.R. parts 730-
774. Diversion contrary to U.S. law is prohibited. The export, re-export, transfer or re-transform of this technical data to any other company, entity, person, or destination, or for any use or purpose other than that for which the technical data was originally provided by Pratt & Whitney, is prohibited without prior written approval from, as applicable, RTX, P&WC, Pratt & Whitney and/or Collins Aerospace, and authorization under applicable export laws.
EAR Export Classification: ECCN 9E991 Compliance Category 3
Pratt & Whitney Proprietary Information © 2023.Subject to export control. EAR Export Classification: ECCN 9E991 Summary The purpose of this Alert Service Bulletin is to do an angle ultrasonic scan of the High Pressure Compressor (HPC) 8th stage disk to identify possible material anomalies. The source of the anomaly is thought to occur during part manufacture.
NOTE Completion of the inspection detailed in this Alert Service Bulletin is required for service run parts to be eligible for installation in an engine. You must inspect new parts (non-service run) not previously inspected, before installation.
Planning Information Applicability Engine Models Applicable PW1519G, PW1521G, PW1521GA, PW1521G-3, PW1524G, PW1524G-3, PW1525G, PW1525G-3 Engine Serial Nos. All engines.
Concurrent Requirements There are no concurrent requirements.
Reason Problem: HPC 8th stage disks shipped before revised inspection procedures can contain anomalies that affect the part material.
Cause: It is possible that anomalies were introduced during part manufacture which were not identified by the inspection procedures available at that time.
Solution: Do an angle ultrasonic scan of the HPC 8th stage disk that can detect material anomalies.
Description Do an inspection of the HPC 8th stage disk.
Compliance Category 3 Do an initial angled ultrasonic scan inspection of the HPC 8th stage disk in 10000 cycles or less since new or when the HPC module is disassembled sufficiently to give access to the HPC rotor assembly, whichever occurs first. See Figure 4.
Completion of the inspection specified in this Alert Service Bulletin is necessary for applicable parts to be permitted for installation in an engine. You must examine applicable new parts (not service-run) that were not examined, before installation.
Pratt & Whitney Proprietary Information © 2023.Subject to export control. EAR Export Classification: ECCN 9E991 NOTE 'Engine Shop Visit' is the induction of an engine into the shop for maintenance involving the separation of major core engine flanges inclusive of Flange D and aft. The separation of engine flanges solely for the purpose of transportation without subsequent engine maintenance does not constitute a shop visit. See Figure 1.
Approval Data The part number changes and/or part changes specified in the Material Information section and Accomplishment Instructions of this Alert Service Bulletin agree with the applicable Federal Aviation Regulations and are FAA-Approved for the engine model(s) given.
Manpower The estimate of man-hours of labor directly necessary to do the intent of this Alert Service Bulletin are as follows:
Necessary to Gain Access to the Parts (from HPC Rotor Assembly) Necessary to Disassemble the HPC Rotor Assembly ... 25.0 hours.
Necessary to Disassemble the HPC 8th Stage Rotor Assembly ... 2.0 hours.
Necessary to Clean the HPC 8th Stage Disk ... 8.0 - 16.0 hours.
Necessary to Do a Fluorescent Penetrant Inspection of the HPC 8th Stage Disk ... 0.5 - 1.0 hour.
Necessary to Do a Visual Inspection of the HPC 8th Stage Disk ... 2.0 hours.
If Necessary to Mark the Part ... 0.5 hour.
Total Necessary Man-hours ... 38.0 - 46.5 hours.
Weight and Balance No Change.
Electrical Load Data Not Applicable.
Software Accomplishment Summary Not Applicable.
References Turbojet Engine Standard Practices Manual, Part No. 585005.
PW1500G Series Engine Illustrated Parts Data (EIPD), PN 5305819.
1.
A.
B.
2.
3.
4.
5.
6.
1.
2.
Pratt & Whitney Proprietary Information © 2023.Subject to export control. EAR Export Classification: ECCN 9E991 PW1500G Series SP-72-35 Special Procedures - High Pressure Compressor (HPC) Module - Engine Manual PN 5317961.
Service Bulletin No. PW1000G-A-72-00-0158-00A-930A-D; Engine - Group, High Pressure Compressor (HPC) - Replace The HPC 8th Stage Rotor Configuration And HPC Rear Hub With A New Configuration And Hub That Has Increased Cycle Limits.
Non-Destructive Inspection Procedure (NDIP) NDIP-1260, dated November 16, 2022, or later revision.
Publications Changed -PW1500G Series Engine Illustrated Parts Data (EIPD), PN 5305819 72-35-40, Figure 01 Interchangeability Not Applicable.
Information in the Appendix Alternate Accomplishment Instructions (No) Progression Charts (No) Added Data (Yes) Revision to Table of Limits (No) Inspection Procedures (No) Material - Cost and Availability Part prices were not available at the time of Alert Service Bulletin publication. Contact Pratt & Whitney Spares Management & Logistics for firm quotations.
There is no kit provided to do this Alert Service Bulletin.
Part availability information is provided in material data Instructions - Disposition.
Industry Support Program Not Applicable.
Modification and Spares Information Parts Modification Conditions
(4) Do an inspection as specified in the Accomplishment Instructions.
Spare Parts Availability (X) See Reference 2, Illustrated Parts Data for applicable replacement parts.
3.
4.
5.
1.
2.
3.
Pratt & Whitney Proprietary Information © 2023.Subject to export control. EAR Export Classification: ECCN 9E991 Vendor Services or Special Components/Materials Operators seeking an approved repair station to modify parts affected by this Service Bulletin please reference the repair Service Value Catalog (SVC) published by the P&W Repair Sourcing team. For further information please contact the P&W Repair Sourcing team via email at pw1500sourcing@prattwhitney.com. Do the inspection, vendor to reference Reference 5, NDIP- 1260.
NOTE
EXCEPT FOR WORK OR SUPPLIES TO BE PERFORMED OR FURNISHED BY PRATT &
WHITNEY, IT IS UNDERSTOOD THAT PRATT & WHITNEY DOES NOT ENDORSE THE WORK
PERFORMED BY THE COMPANY OR COMPANIES NAMED HEREIN OR ANY OTHER
COMPANY AND DOES NOT ACCEPT RESPONSIBILITY TO ANY DEGREE FOR THE
SELECTION OF SUCH COMPANY OR COMPANIES FOR THE PERFORMANCE OF ANY WORK OR PROCUREMENT OF SUPPLIES.
Material Information Support Equipment List:
No more Support Equipment is necessary.
Parts Necessary To Accomplish This Service Bulletin Using New Purchased Spare Parts Only:
Not Applicable.
Material Information Table:
NOTE It is possible to use the Chapter/Section and Figure/Item reference number shown below the old part number to find the part in the Illustrated Parts Data.
Because there are many different configurations used, it is frequently necessary to show more than one group of parts. When this occurs, parts that are interchangeable are shown line-by-line only, unless this is shown differently.
CAUTION: THE FOLLOWING MATERIAL DATA TABLE(S) ARE ORGANIZED BY ILLUSTRATED PARTS DATA. ALL PARTS IN THE TABLE(S) MAY OR MAY NOT BE APPLICABLE TO ALL THE ENGINE MODELS SHOWN IN THE TABLE HEADING. YOU MUST REFER TO THE
APPROPRIATE ILLUSTRATED PARTS DATA FOR ENGINE MODEL APPLICABILITY USING THE OLD PART NUMBER (PN) AND CATALOG SEQUENCE NUMBER. FAILURE TO INSTALL THE
PART(S) IN THE CORRECT ENGINE MODEL MAY RESULT IN A CONFIGURATION THAT IS NOT FAA APPROVED.
For PW1519G, PW1521G, PW1521GA, PW1521G-3, PW1524G, PW1524G-3, PW1525G, PW1525G-3 Engines:
New Part Number Part Name Quantity Old Part Number (CSN) Instructions - Dispositions DISK - HPC, 8TH STAGE 1 30G7208 (72-35-40-01A- 110B)
(4)(X) Accomplishment Instructions
Pratt & Whitney Proprietary Information © 2023.Subject to export control. EAR Export Classification: ECCN 9E991 NOTE Completion of the inspection detailed in this Alert Service Bulletin is required for service run parts to be eligible for installation in an engine. You must inspect new parts (non-service run) not previously inspected, before installation.
Do an inspection of the HPC 8th Stage Disk, PN 30G7208, as follows. See Figure 2.
If the HPC 8th stage disk serial number is not identified in Table 1, this Alert Service Bulletin is not applicable.
If the HPC 8th stage disk has a "SB 72-0197", "SB 72-0142", or "NDIP-1260 CSN ####" mark, no more action is necessary and the intent of this Service Bulletin is complete.
NOTE #### in "NDIP-1260 CSN ####" is the number of cycles since new at the time of inspection.
Remove the HPC 8th stage disk as specified in Reference 3, Special Procedures, PWSPROC- A-72-35-30-01A-530G-B.
Disassemble the HPC 8th stage disk as specified in Reference 3, Special Procedures, PWSPROC-A-72-35-40-00A-530A-B.
Clean the HPC 8th stage disk to prepare for Fluorescent Penetrant Inspection (FPI), as specified in Reference 3, Special Procedures, PWSPROC-A-72-35-4111-00A-250A-C.
Do an FPI of the HPC 8th stage disk, as specified in Reference 1, SPM, Chapter/Section 70- 33-00, and Reference 3, Special Procedures, PWSPROC-A-72-35-4111-00A-351A-C.
Do a visual inspection of the HPC 8th stage disk for damage, as specified in Reference 3, Special Procedures, PWSPROC-A-72-35-4111-00A-310A-C.
Send the HPC 8th stage disk to an approved source. Contact the P&W Repair Sourcing Team in the Vendor Services or Special Components/Materials section above for an authorized vendor and shipping information.
The vendor will do an inspection of the part as specified in Reference 5, NDIP-1260, and return the part.
If the HPC 8th stage disk does not pass the inspection, remove the HPC 8th stage disk from service and return the part to Pratt & Whitney Commercial Serviceable Assets (CSA) unless directed otherwise by Customer Technical Services (CTS).
If the HPC 8th stage disk passes the inspection, mark the part as follows.
Find the HPC 8th stage disk PN "30G7208" mark. See Figure 3.
Use a deep dot peen method or a deep electrolytic etch method to make a "NDIP-1260 CSN ####" mark as specified in Reference 1, SPM, Chapter/Section 70-11-00, where "####" is the number of cycles since new on the part at the time of the angled ultrasonic scan inspection.
1.
A.
B.
2.
3.
4.
5.
6.
7.
8.
9.
10.
A.
B.
Pratt & Whitney Proprietary Information © 2023.Subject to export control. EAR Export Classification: ECCN 9E991 NOTE The purpose of the mark is to identify that the referenced NDIP was completed and to identify the cycles since new at the time of the angled ultrasonic scan inspection. An example where the NDIP was completed at 1000 cycles since new would receive: NDIP- 1260 CSN 1000.
Install the HPC 8th Stage Disk, PN 30G7208, with the new mark as specified in Reference 3, Special Procedures, PWSPROC-A-72-35-40-01A-710A-B.
11.
Pratt & Whitney Proprietary Information © 2023.Subject to export control. EAR Export Classification: ECCN 9E991 Figure 1: LOCATION OF THE ENGINE FLANGES
Pratt & Whitney Proprietary Information © 2023.Subject to export control. EAR Export Classification: ECCN 9E991 Figure 2: LOCATION OF THE HPC 8TH STAGE DISK
Pratt & Whitney Proprietary Information © 2023.Subject to export control. EAR Export Classification: ECCN 9E991 Figure 3: IDENTIFY THE HPC 8TH STAGE DISK