On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Text · 21Partly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers. © Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2018-0431, the docket of AD 2018-22-02. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'c6dea1188abcf97a0d7691be60fb4616e9c5b988a2517c8482f768eaf8ca96c0' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'c6dea1188abcf97a0d7691be60fb4616e9c5b988a2517c8482f768eaf8ca96c0' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Procedure is currently under revision. Un-official in work copy.
ENGINE - HUB, FRONT, HIGH PRESSURE COMPRESSOR (HPC) AND GEAR, NO. 3 BEARING BEVEL - DECREASE OF
THE HPC FRONT HUB LIFE AND REPLACEMENT OF THE
HUB AND GEAR TO IMPROVE HPC DURABILITY DMC: PW1000G-C-72-00-0106-00A-930A-D | Issue No: 000.04 | Issue Date: 2018-05-15
ALERT SERVICE BULLETIN Revision History Original Issue (001) June 15, 2018 Reason for the Revision This is the Original Issue of this Service Bulletin.
MODEL APPLICATION PW1127G-JM, PW1127GA-JM, PW1130G-JM, PW1133G-JM, PW1133GA-JM
BULLETIN ISSUE SEQUENCE PW1100G-JM Series 72-00-0106 Page 1 of 21ENGINE - HUB, FRONT, HIGH PRESSURE COMPRESSOR (HPC) AND GEAR, N...
6/15/2018http://127.0.0.1:8002/NGPF-SB/PW1000G-C-72-00-0106-00A-930A-D.html DRAFT-02
ENGINE - HUB, FRONT, HIGH PRESSURE COMPRESSOR (HPC) AND GEAR, NO. 3 BEARING BEVEL - DECREASE OF
THE HPC FRONT HUB LIFE AND REPLACEMENT OF THE
HUB AND GEAR TO IMPROVE HPC DURABILITY
UTC/PRATT & WHITNEY PROPRIETARY INFORMATION This document contains proprietary information of United Technologies Corporation ("UTC") and/or of one or more of UTC's worldwide divisions, subsidiaries, and affiliates including Pratt & Whitney Canada, Pratt & Whitney, and UTC Aerospace Systems and/or of a supplier and/or partner to any of the foregoing UTC entities.
The proprietary information set forth in this document is provided in confidence and solely for the purposes of supporting engine certification and providing applicable information regarding the proper use, maintenance, inspection, repair, and servicing and parts application of Pratt & Whitney engine products and services ("Purpose"). By accepting this document the recipient agrees to limit copying the document, or any information in it, solely for distribution within the recipient's company or to a third party to carry out the stated Purpose for the document and any information in it. You cannot possess, use, copy, or disclose this document or any information in it for any purpose other than that stated above, without UTC's express written permission. Violation of these restrictions may result in criminal and/or civil liability.
Neither this document nor any information in it may be disclosed to others, or used for any other purpose, including, without limitation, to design, create, develop, reproduce, manufacture or derive any design, part, product, material, process, modification, configuration change or repair, or obtain FAA, TCCA or other government approval to do so.
If a Government agency or department intends to disclose any information, written notice should be given to: (1) Intellectual Property Counsel, Pratt & Whitney, 400 Main Street, East Hartford, CT 06118, U.S.A.; (2) VP and Counsel, Commercial Engines, Pratt & Whitney, 400 Main Street, East Hartford, CT 06118, U.S.A.
WARNING: This document contains technical data the export of which is or may be restricted by the Export Administration Act and the Export Administration Regulations (EAR), 15 C.F.R. parts 730-774. Diversion contrary to U.S. law is prohibited. The export, re-export, transfer or re-transform of this technical data to any other company, entity, person, or destination, or for any use or purpose other than that for which the technical data was originally provided by Pratt & Whitney, is prohibited without prior written approval from, as applicable, UTC, P&WC, Pratt & Whitney and/or UTC Aerospace Systems, and authorization under applicable export laws.
EAR Export Classification: ECCN 9E991 Table 1.
Type Certificate Holder:
International Aero Engines LLC 400 Main Street East Hartford, CT 06118 USA Type Certificate Holder is International Aero Engines, LLC (IAE LLC). Pratt & Whitney is providing this data on behalf of IAE LLC.
Compliance Category 3 Page 2 of 21ENGINE - HUB, FRONT, HIGH PRESSURE COMPRESSOR (HPC) AND GEAR, N...
6/15/2018http://127.0.0.1:8002/NGPF-SB/PW1000G-C-72-00-0106-00A-930A-D.html DRAFT-02
Summary The purpose of this Service Bulletin is to provide a Fleet Management Plan (FMP) for the steel HPC Front Hub PN 30G2401. Certified life limits in the Reference 3, Airworthiness Limitation Manual, Table of Limits, are being decreased.
Planning Information Applicability Engine Models Applicable PW1127G-JM, PW1127GA-JM Engine Serial Nos. - All engines that have HPC Front Hub PN 30G2401 installed (Engines that have NOT incorporated Reference 6, Service Bulletin No. PW1000G-C-72-00-0053-00A-930A-D) This Service Bulletin also applies to engines converted to PW1130G-JM, PW1133G-JM, PW1133GA-JM engine models by Reference 5, Service Bulletin No. PW1000G-C-72-00-0001-00A-930A-D; Engine - Thrust/Model Conversion - Replacement Or Reprogramming Of The Data Storage Unit (DSU).
NOTE The engine serial number effectivity data and its related engine model identification contained in this Service Bulletin are taken from the records of part(s) incorporation during initial manufacture.
After initial engine manufacture, but before final delivery, Pratt & Whitney may change part(s) in the engine or change the model identification of the engine. Such action is recorded on FAA337 forms.
To find Service Bulletin PW1000G-C-72-00-0106-00A-930A-D models that are applicable, the owner/operator of the engine must compare the Service Bulletin List supplied with the engine as sent from Pratt & Whitney and the List of Changes incorporated at the Airframer from FAA337 forms to the Service Bulletin PW1000G-C-72- 00-0106-00A-930A-D Effectivity section.
Concurrent Requirements There are no concurrent requirements.
Reason Problem: Aqueous corrosion pitting on the steel HPC front hub results in reduced Low Cycle Fatigue (LCF) capability that enables crack initiation and propagation to fracture.
Cause: The coated steel front hub is susceptible to corrosion through and below the painted surfaces during engine down-time.
Solution: Revise the certified life of the steel HPC front hub as specified in the Reference 3, Table of Limits/Airworthiness Limitation Manual.
Description Replace the HPC front hub and the No. 3 bearing bevel gear and omit the No. 3 bearing rear spacer.
Compliance Page 3 of 21ENGINE - HUB, FRONT, HIGH PRESSURE COMPRESSOR (HPC) AND GEAR, N...
6/15/2018http://127.0.0.1:8002/NGPF-SB/PW1000G-C-72-00-0106-00A-930A-D.html DRAFT-02
Category 3 For PW1130G-JM, PW1133G-JM, PW1133GA-JM Engine Models:
Do before 4,400 cycles since new, or 48 months from date of engine manufacture, whichever comes first. See Table 3 in the Appendix for engine manufacture dates.
For PW1127G-JM, PW1127GA-JM Engine Models:
Do before 6,180 cycles since new, or 60 months from date of engine manufacture, whichever comes first. See Table 3 in the Appendix for engine manufacture dates.
Approval Data The part number changes and/or part changes specified in the Material Information section and Accomplishment Instructions of this Service Bulletin agree with the applicable Federal Aviation Regulations and are FAA- Approved for the engine model(s) given.
The technical content of this document is approved under the authority of DOA Approval No. EASA.21J.031.
Manpower The estimate of man-hours of labor directly necessary to do the intent of this Service Bulletin are as follows:
Necessary for Replacement ... Insert Hours Here hours.
Subassembly Replacement - Disassembly and assembly of the engine for access to the changed subassembly (i.e., module, accessory, component, build group) ... Insert Hours Here hours.
Part(s) Replacement - Disassembly and assembly of the subassembly (i.e., module, accessory, component, build group) for access to the changed part(s) ... Insert Hours Here hours.
Total Necessary Man-hours ... Insert Hours Here hours.
Weight and Balance -0.9 Pound(s) (- 0.4 kg).
Electrical Load Data Not Applicable.
Software Accomplishment Summary
CAUTION Cycles since new removal limits for steel HPC front hubs in engines operating across mixed PW1100G-JM engine models should be calculated using methods defined in Reference 3, PW1100G-JM Series Airworthiness Limitation Manual, Data Module PW1000G-C-05-10-00-02A-288A-D; Time Limits - Mixed Model Management Of Rotating And Non-Rotating Life Accessed Parts - Overhaul And Retirement Schedule.
If an engine is operating across mixed PW1100G-JM engine models and has any run time on the PW1130G-JM, PW1133G-JM, PW1133GA-JM engine models, the removal time limit will be 48 months from Entry Into Service (EIS) of the specific engine serial number. Failure to account for mixed run time may result in non-compliance with this Service Bulletin.
1.
A.
B.
2.
Page 4 of 21ENGINE - HUB, FRONT, HIGH PRESSURE COMPRESSOR (HPC) AND GEAR, N...
6/15/2018http://127.0.0.1:8002/NGPF-SB/PW1000G-C-72-00-0106-00A-930A-D.html DRAFT-02
Not Applicable.
References Turbojet Engine Standard Practices Manual, Part No. 585005.
PW1100G-JM Series Engine Illustrated Parts Data (EIPD), Part No. 5316995.
PW1100G-JM Series Airworthiness Limitation Manual (AWL), Part No. 5316993.
PW1100G-JM Series Engine Manual, (EM) Part No. 5316992.
Service Bulletin No. PW1000G-C-72-00-0001-00A-930A-D Engine - Thrust/Model Conversion And DSU Data Selection/Engine Hardware Compatibility - Replacement Or Reprogramming Of The Data Storage Unit (DSU). Issue Sequence 72-00-0001, PW1100G Series.
Service Bulletin No. PW1000G-C-72-00-0053-00A-930A-D; Engine - Hub, Front, High Pressure Compressor (HPC) And Gear, No. 3 Bearing Bevel - Replace The Hub And Gear To Improve HPC Durability And To Make The Assembly Procedure Easier.
Publications Changed -PW1100G-JM Series Engine Illustrated Parts Data (EIPD), Part No. 5316995.
-PW1100G-JM Series Engine Manual, (EM) Part No. 5316992.
-PW1100G-JM Series Airworthiness Limitation Manual (AWL), Part No. 5316993.
Interchangeability Old and new parts are interchangeable only in complete sets.
Information in the Appendix Alternate Accomplishment Instructions (No) Progression Charts (Yes) Added Data (Yes) Revision to Table of Limits (Yes) Inspection Procedures (No) Material - Cost and Availability Part prices were not available at the time of Service Bulletin publication. Contact Pratt & Whitney Spares Management & Logistics for firm quotations.
There is no kit provided to do this Service Bulletin.
Part availability information is provided in material data Instructions - Disposition.
Industry Support Program Not Applicable.
Modification and Spares Information
1.
2.
3.
4.
5.
6.
1.
2.
3.
Page 5 of 21ENGINE - HUB, FRONT, HIGH PRESSURE COMPRESSOR (HPC) AND GEAR, N...
6/15/2018http://127.0.0.1:8002/NGPF-SB/PW1000G-C-72-00-0106-00A-930A-D.html DRAFT-02
Estimated part prices are provided when they are available at time of publication. The Estimate of Unit Price is only for planning purposes and does not constitute a firm quotation. An asterisk (*) is shown where part pricing information was unavailable. In either case, contact Pratt & Whitney Spares Management & Logistics for firm quotations Parts Modification Conditions
(1) The new part can be obtained by modification of the old part as specified in the Accomplishment Instructions.
(2) The new part is a replacement part only, and cannot be obtained by modification of the old part.
Spare Parts Availability (A) The new part is available.
(M) It is possible to get the new part only by modification.
(N) The old part is not available.
(NP) The part is an item that is usually not procured as a spare item.
Vendor Services or Special Components/Materials Not Applicable Material Information Support Equipment List:
No more Support Equipment is necessary Parts Necessary To Accomplish This Service Bulletin Using New Purchased Spare Parts Only:
New Part Number Part Name Quantity Price 30G5801 HUB - HPC, FRONT 1 * 5323784 GEAR - NO. 3 BEARING BEVEL 1 * Estimated part prices are provided when they are available at time of publication. The Estimate of Unit Price is only for planning purposes and does not constitute a firm quotation. An asterisk (*) is shown where part pricing information was unavailable. In either case, contact Pratt & Whitney Spares Management & Logistics for firm quotations.
Material Information Table:
NOTE It is possible to use the Chapter/Section and Figure/Item reference number shown below the old part number to find the part in the Illustrated Parts Catalog.
Because there are many different configurations used, it is frequently necessary to show more than one group of parts. When this occurs, parts that are interchangeable are shown line-by-line only, unless this is shown differently.
CAUTION: THE FOLLOWING MATERIAL DATA TABLE(S) ARE ORGANIZED BY ILLUSTRATED PARTS CATALOG. ALL PARTS IN THE TABLE(S) MAY OR MAY NOT BE APPLICABLE TO ALL THE ENGINE MODELS SHOWN IN THE TABLE HEADING. YOU MUST REFER TO THE APPROPRIATE ILLUSTRATED
PARTS CATALOG FOR ENGINE MODEL APPLICABILITY USING THE OLD PART NUMBER (PN) AND CATALOG SEQUENCE NUMBER. FAILURE TO INSTALL THE PART(S) IN THE CORRECT ENGINE MODEL MAY RESULT IN A CONFIGURATION THAT IS NOT FAA APPROVED.
For PW1127G-JM, PW1127GA-JM Engines:
Page 6 of 21ENGINE - HUB, FRONT, HIGH PRESSURE COMPRESSOR (HPC) AND GEAR, N...
6/15/2018http://127.0.0.1:8002/NGPF-SB/PW1000G-C-72-00-0106-00A-930A-D.html DRAFT-02
New Part Number Part Name Quantity Old Part Number (CSN) Instructions - Dispositions 5326607 HIGH PRESSURE COMPRESSOR (HPC) ASSEMBLY 1 5325407 (72-00-00-01A- 070C)
(1)(M)(NP) 5326606 .ROTOR AND STATOR - HPC,
MODULE, ASSEMBLY OF 1 5325093 (1)(M)(NP) 5326605 ..COMPRESSOR ROTOR - AXIAL,
HPC, ASSEMBLY OF 1 5325077 (1)(M)(NP) 30G5801 ...HUB - HPC, FRONT 1 30G2401 (72-35-30-01A- 120A)
(2)(A)(N) ...SPACER - NO. 3 BEARING, REAR 1 5325271 (72-35-30-01A- 100B) (N) 5323784 GEAR - NO. 3 BEARING BEVEL 1 5311078 (72-34-60-01A- 310A)
(2)(A)(N) Accomplishment Instructions Replace the HPC Front Hub, PN 30G2401, with PN 30G5801 as specified in Reference 4, Engine Manual Special Procedures, PW1000G-C-72-35-30-02A-530A-B and PW1000G-C-72-35-30-01A-710A-B Reidentify the HPC Axial Compressor Rotor Assembly, PN 5325077, to PN 5326605. See Figure 3.
Cross out the existing PN "5325077" and mark the part with the new PN "5326605" adjacent to the crossed out PN. Use the part marking procedure specified in Reference 1, Standard Practices Manual, Chapter/Section 70-11-00, Class 14 Ink Marking and Data Plate, Class 39 Marking.
Replace the No. 3 Bearing Bevel Gear PN, 5311078 with PN 5323784. See Figure 2 and refer to Reference 4, Engine Manual PW1000G-C-72-00-34-01A-520A-B and PW1000G-C-72-00-34-04A-720A-B except as follows:
NOTE Reference 4, Engine Manual PW1000G-C-72-00-34-04A-720A-B, is scheduled to incorporate the assembly instructions related to this Service Bulletin and will take precedence over the Service Bulletin.
Check the position of the No. 3 bearing stack on the HPC hub.
Refer to the worksheet PW1000G-C-72-00-34-00A-720A-B for Dimensions A and F. Make a record of these on this worksheet for Dimensions A and F.
Subtract Dimensions F, G, and H from Dimension A to get the calculated Dimension J.
Measure Dimension J and subtract from calculated Dimension J. The result should be +/- 0.000 -
0.001 inches (0.000 - 0.025 mm). Make a record of this on the worksheet.
If the result is not +/- 0.000 - 0.001 inches (0.000 - 0.025 mm), remove the seal seat [11], examine the parts for correct interface, and then reinstall. Refer to PW1000G-C-72-00-34-01A-520A-B.
Install the No. 3 bearing retaining nut to the HPC hub as follows.
Apply Engine Oil (P03-001) to the threads and face of the nut.
Install the nut to the HPC hub fingertight.
Install the (PWA 111226) Holder Adapter to the HPC hub.
Install the (PWA 111228) Torque Adapter over the Holder Adapter and nut.
Install the (PWA 202003) Torque Multiplier to the Torque Adapter and Holding Adapter.
1.
2.
A.
3.
A.
(1)
(2)
(3)
(4) B.
(1)
(2)
(3)
(4)
(5) Page 7 of 21ENGINE - HUB, FRONT, HIGH PRESSURE COMPRESSOR (HPC) AND GEAR, N...
6/15/2018http://127.0.0.1:8002/NGPF-SB/PW1000G-C-72-00-0106-00A-930A-D.html DRAFT-02
Make a mark on the forward carbon seal seat and an adjacent mark on the front of the HPC hub with a PMC 4564 Marker (P05-472).
Torque the nut to 1500 - 1900 lbf-in (169.5 - 214.6 N.m).
NOTE Do not torque the nut more than 21,660 lbf-in (2447.3 N.m).
Turn the nut 45 - 49 degrees.
Loosen the nut to zero.
Turn the seal seat back to the adjacent mark on the HPC hub, if necessary.
Torque the nut to 1500 - 1900 lbf-in (169.5 - 214.6 N.m).
Make a mark on the nut and a related adjacent mark on the front of the HPC hub with the Marker.
Turn the nut 45 - 49 degrees.
Check if the seal seat has turned and measure the distance to the related mark, if necessary.
Make a note of this measurement.
Loosen the nut to zero.
Turn the seal seat past the adjacent mark the distance you measured, if necessary.
Torque the nut to 1500 - 1900 lbf-in (169.5 - 214.6 N.m).
If the mark on the nut is not more than 1 degree further than the mark on the hub, turn the nut 45 - 49 degrees.
If the mark on the nut is more than 1 degree farther than the mark on the hub, do the steps that follow in the sequence shown until the mark is not more than 1 degree farther.
Remove the mark on the nut and the related mark on the hub.
Make a new mark on the nut and a new adjacent mark on the HPC hub with a Marker.
Turn the nut 45 - 49 degrees.
Loosen the nut to zero.
Turn the seal seat past the adjacent mark the distance you measured, if necessary.
Torque the nut to 1500 - 1900 lbf-in (169.5 - 214.6 N.m).
If the mark on the nut is more than 1 degree farther than the mark on the hub, repeat Step
3.B.(19) again.
If the mark on the nut is not more than 1 degree farther than the mark on the hub, turn the nut 45 - 49 degrees.
Clean the nut and adjacent parts with PMC 9094 Isopropyl Alcohol (P11-014) and a Lint-Free Cotton Cloth (P05-005).
Reidentify the HPC Module Rotor and Stator Assembly PN 5325093 to PN 5326606. See Figure 4.
Cross out the existing PN "5325093" and mark the part with the new PN "5326606" adjacent to the crossed out PN. Use the part marking procedure specified in Reference 1, Standard Practices Manual, Chapter/Section 70-11-00, Class 14 Ink Marking and Data Plate, Class 39 Marking.
During installation of the Compressor Intermediate Case (CIC) module to the HPC as specified in Reference 4, Engine Manual, PW1000G-C-72-00-34-00A-720A-B with the following changes in the procedure:
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(20)
4.
A.
5.
Page 8 of 21ENGINE - HUB, FRONT, HIGH PRESSURE COMPRESSOR (HPC) AND GEAR, N...
6/15/2018http://127.0.0.1:8002/NGPF-SB/PW1000G-C-72-00-0106-00A-930A-D.html DRAFT-02
Omit the No. 3 Bearing Rear Spacer, PN 5325271 at assembly.
Omit the following step: "Do a check of the position of the installed spacer as follows" Reidentify the HPC Assembly PN 5325407 to PN 5326607. See Figure 5.
Cross out the existing PN "5325407" and 2D matrix marking and mark the part with the new PN "5326607" adjacent to the crossed out PN. Use the part marking procedure specified in Reference 1, Standard Practices Manual, Chapter/Section 70-11-00, Class 14 Ink Marking and Data Plate, Class 39 Marking.
A.
B.
6.
A.
Page 9 of 21ENGINE - HUB, FRONT, HIGH PRESSURE COMPRESSOR (HPC) AND GEAR, N...
6/15/2018http://127.0.0.1:8002/NGPF-SB/PW1000G-C-72-00-0106-00A-930A-D.html DRAFT-02
ENGINE - HUB, FRONT, HIGH PRESSURE COMPRESSOR (HPC) AND GEAR, ... Page 10 of 21
• * Pratt & Whitney Proprietary Information © 2018.Subject to export control. EAR Export Classification: ECCN 9E991 Figure 1: LOCATION OF THE НРС FRONT HUB Uncontrolled Copy 5325271 NO. 3 BEARING 30G2401 REAR SPACER OMIT AT ASSEMBLY HPC
FRONT HUB
REPLACE WITH 30G5801 ICN-PW1 145-28441-A-001-01 DR http://127.0.0.1:8002/NGPF-SB/PW1000G-C-72-00-0106-00A-930A-D.html 6/15/2018
ENGINE - HUB, FRONT, HIGH PRESSURE COMPRESSOR (HPC) AND GEAR, ….. Page 11 of 21 * * * Uncontrolled Copy * * * Pratt & Whitney Proprietary Information © 2018.Subject to export control. EAR Export Classification: ECCN 9E991 Figure 2: LOCATION OF THE NO. 3 BEARING BEVEL GEAR 5311078 NO. 3 BEARING
BEVEL GEAR
REPLACE WITH 5323784 ICN-PW1000G-C-72000106-P-28443-A-001-01 DR http://127.0.0.1:8002/NGPF-SB/PW1000G-C-72-00-0106-00A-930A-D.html 6/15/2018
ENGINE - HUB, FRONT, HIGH PRESSURE COMPRESSOR (HPC) AND GEAR, ... Page 12 of 21 * * * Uncontrolled Copy * * * Pratt & Whitney Proprietary Information © 2018. Subject to export control. EAR Export Classification: ECCN 9E991 Figure 3: LOCATION OF THE HPC AXIAL COMPRESSOR ROTOR ASSEMBLY
IDENTIFICATION
REIDENTIFY AS
SPECIFIED IN THE
ACCOMPLISHMENT
INSTRUCTIONS FT DRA ICN-PW1000G-C-72000106-P-77445-28445-A-001-01 http://127.0.0.1:8002/NGPF-SB/PW1000G-C-72-00-0106-00A-930A-D.html 6/15/2018