On this page
ADs that cite it · 2
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 63Partly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers. © Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2018-0920; AD 2019-06-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'a84a30dc15351259ed54a2e3d388c495d9f59ca1d76607621b9da61a1042d1c6' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'a84a30dc15351259ed54a2e3d388c495d9f59ca1d76607621b9da61a1042d1c6' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
SER VICE
BULLETIN
REVISION NOTICE ENGINE FUEL AND
CONTROL —
MANIFOLD
ASSEMBL Y , SUPPL Y , FUEL NOZZLE (FS01 THRU FS08) —
REPLACE THE
MANIFOLD
ASSEMBLIES AND INST ALL NEW HARDW ARE FOR
IMPROVED
DURABILITY T urbojet Engine Service Bulletin No.PW4G-100-73-48 Revision No.
1 dated April 24, 2018.
Revision History Original Issue March 14, 2018 Revision 1 April 24, 2018 Reason for the Revision T o update the Disposition Code for Clamp PN ST1540-05.
Ef fect of Revision on Prior Compliance None.
This is a Complete Revision (Not Applicable to the SGML version) The contents are in accordance with the list of ef fective pages.
All pages have the current revision number .
T echnical changes are marked with black bars.
MODEL
APPLICA TION PW4164, PW4164-1D, PW4168, PW4168-1D, PW4168A, PW4168A-1D, PW4170
BULLETIN ISSUE
SEQUENCE PW4G-100 Series 73-48 Page Revision No.
Date 1 thru 62 1 April 24/18 A copy of this Revision Notice and any future revision notices must be filed as a permanent record with your copy of the subject bulletin.
P&W Distribution Code 2639 PW4G-100-73-48 Page 1 of 1 Published in United States of America Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
SER VICE
BULLETIN ENGINE FUEL AND
CONTROL —
MANIFOLD
ASSEMBL Y , SUPPL Y , FUEL NOZZLE (FS01 THRU FS08) —
REPLACE THE
MANIFOLD
ASSEMBLIES AND INST ALL NEW HARDW ARE FOR
IMPROVED
DURABILITY MODEL
APPLICA TION PW4164, PW4164-1D, PW4168, PW4168-1D, PW4168A, PW4168A-1D, PW4170
BULLETIN ISSUE
SEQUENCE PW4G-100 Series 73-48 A T A NUMBER 73-1 1-00
UTC/P&W
PROPRIET AR Y
INFORMA TION This document is the property of United T echnologies Corporation — Pratt & Whitney (UTC/P&W).
Y ou may not possess, use, copy or disclose this document or any information in it, for any purpose, including without limitation to design, manufacture, or repair parts, or obtain F AA or other government approval to do so, without UTC/P&W's express written permission.
Neither receipt nor possession of this document alone, from any source, constitutes such permission.
Possession, use, copying or disclosure by anyone without UTC/P&W's express written permission is not authorized and may result in criminal and/or civil liability .
Export Classification:
Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Compliance Category 5 P&W Distribution Code 2639 l March 14/18 PW4G-100-73-48
REVISION NO.
1 - April 24/18 Page 1 of 62 Published in United States of America
Summary The purpose of this Service Bulletin is to replace the fuel nozzle supply manifold assemblies (FS manifolds) (FS01 thru FS08) and install new brackets and clamps on the FS manifolds.
This change adds suf ficient dampening to shift the natural frequency outside of the acoustic frequency range identified during an investigation.
This change only applies to the PW4000-100” engines with the T alon IIA and T alon IIB combustion chamber configurations.
NOTE :
The FS manifolds (FS01 thru FS08) can be repaired as specified in Reference 4, CIR Manual, Chapter/Section 72-41-40 Repair-03.
Planning Information Ef fectivity Data Engine Models Applicable PW4164, PW4168, PW4168A Engine Serial No.
— All engines that have incorporated Reference 5, Service Bulletin PW4G-100-72-214, or Reference 7, Service Bulletin PW4G-100-72-219, or Reference 9, Service Bulletin PW4G-100-72-253 incorporating the T alon IIB Outer Combustion Chamber Assembly , PN 51J500 or PN 51J381 PW4168A Engine Serial No.
— All engines that incorporate the T alon IIA Outer Combustion Chamber Assembly , PN 51J100 or PN 51J382 PW4168A-1D, PW4170 Engine Serial Nos.
P735001 thru P735190* * This estimate of engine serial numbers will be revised, if necessary , when parts are installed in engines at Pratt & Whitney .
NOTE :
The engine serial number ef fectivity data and its related engine model identification contained in this Service Bulletin are taken from the records of part(s) incorporation during initial manufacture.
After initial engine manufacture, but before final delivery , P&W may change part(s) in the engine or change the model identification of the engine.
Such action is recorded on F AA337 forms.
T o find Service Bulletin PW4G-100-73-48 models that are applicable, the owner/operator of the engine must compare the Service Bulletin List supplied with the engine as sent from P&W and the List of Changes incorporated at the Airframer from F AA337 forms to the Service Bulletin PW4G-100-73-48 Ef fectivity section.
This Service Bulletin also applies to engines converted to the PW4164-1D, PW4168-1D, PW4168A-1D, PW4170 models by Service Bulletin PW4G-100-72-220.
Concurrent Requirements There are no concurrent requirements.
Reason
1.
Problem:
On three occasions cracks and fuel leaks were discovered on the FS manifolds installed on PW4000-94” engines with the T alon II combustion chamber configuration.
Some PW4000-100” engines utilize a version of the T alon II combustion l March 14/18 PW4G-100-73-48
REVISION NO.
1 - April 24/18 Page 2
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
chamber configuration similar to the PW4000-94” engines T alon II combustion chamber configuration.
2.
Cause:
High vibration stresses observed due to coupling of the acoustic combustor mode and the FS manifold structural mode.
3.
Solution:
Replace the FS manifolds and install new brackets and clamps to reduce the stresses.
The FS manifolds will be dampened to shift the natural frequency outside the acoustic frequency range.
Description Replace the FS manifolds and install the new clamps and brackets.
Compliance NOTE :
Service Bulletin incorporation on engines installed on aircraft may be desirable and should be individually evaluated.
Category 5 Do when the engine is disassembled suf ficiently to give access to the changed subassembly
(i.e., module, accessories, components, build groups) and to all changed spare subassemblies.
Approval Data The part number changes and/or part changes specified in the Material Information section and Accomplishment Instructions of this Service Bulletin agree with the applicable Federal A viation Regulations and are F AA-Approved for the engine model(s) given.
The aircraft T ype Certificate (TC) holder has been informed of this change.
Manpower The estimate of man-hours of labor directly necessary to do the intent of this Service Bulletin are as follows:
For Engines Installed On Aircraft
1.
Necessary to Open and Close the Cowl Doors and Deactivate/Reactivate Thrust Reversers .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1.0
2.
Remove Necessary Hardware using the AMM .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1.0
3.
Necessary to Replace the FS Manifolds .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
6.0
4.
Necessary to Install new Hardware .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
10.0
5.
Re-install Necessary Hardware that was Removed using the AMM .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
12.0
6.
T otal Necessary Man-hours .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
40.0 For Engines Not Installed On Aircraft
1.
Necessary to Replace the FS Manifolds .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
6.0
2.
Necessary to Install new Hardware .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
10.0
3.
T otal Necessary Man-hours .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
16.0 W eight Data +
2.4 Pound(s) (+
1.09 kg).
l March 14/18 PW4G-100-73-48
REVISION NO.
1 - April 24/18 Page 3
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Electrical Load Data Not Applicable.
Software Accomplishment Summary Not Applicable.
References
1.
T urbojet Engine Standard Practices Manual, Part No.
585005.
2.
PW4164, PW4168, PW4168A, PW4170 T urbofan Engines, Illustrated Parts Catalog, Part No.
51A343.
3.
PW4164, PW4164-1D, PW4164C, PW4164C-1D, PW4164C/B, PW4164C/B-1D, PW4168, PW4168-1D, PW4168A, PW4168A-1D, PW4170 T urbofan Engines, Engine Manual, Part No.
51A342.
4.
PW4000 Series T urbofan Engines, Engine Cleaning, Inspection And Repair (CIR) Manual, Part No.
51A357.
5.
Airbus A330 Aircraft Maintenance Manual.
6.
Service Bulletin No.
PW4G-100-72-214;
Engine — Chamber Assemblies, Inner And Outer Combustion — Introduction Of The T alon IIB T o Reduce Combustor Exit T emperature At The Outer Diameter .
Issue Sequence 72-214, PW4G-100 Series.
7.
Service Bulletin No.
PW4G-100-72-219;
Engine — Modification Of, T o Incorporate The Advantage70 ™ Performance And Durability Upgrade Kit T o Improve Engine Reliability And Reduce Thrust Specific Fuel Consumption.
Issue Sequence 72-219, PW4G-100 Series.
8.
Service Bulletin No.
PW4G-100-72-220;
Engine — Conversion Of A PW4164, PW4168, Or PW4168A Engine T o A PW4164-1D, PW4168-1D, PW4168A-1D, Or PW4170 Engine.
Issue Sequence 72-220, PW4G-100 Series.
9.
Service Bulletin No.
PW4G-100-72-253;
Engine — Nuts, Chamber Assembly , Outer Combustion — Replacement Of, With W aspaloy Nuts T o Reduce Nut Liberation.
Issue Sequence 72-253, PW4G-100 Series.
NOTE :
References 6, 7, and 9, are shown to help find configurations in relation to this bulletin.
NOTE :
Reference 8 is shown to help find non-production configurations that may incorporate this bulletin.
Publications Changed PW4164, PW4168, PW4168A, PW4170 T urbofan Engines, Illustrated Parts Catalog, Part No.
51A343 73-1 1-00, Figure 5 73-1 1-00, Figure 6 73-1 1-00, Figure 7 PW4164, PW4164-1D, PW4164C, PW4164C-1D, PW4164C/B, PW4164C/B-1D, PW4168, PW4168A, PW4168A-1D, PW4170 T urbofan Engines, Engine Manual, Part No.
51A342.
73-1 1-15 l March 14/18 PW4G-100-73-48
REVISION NO.
1 - April 24/18 Page 4
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Interchangeability Partial incorporation of this Service Bulletin is permitted by fuel nozzle supply manifold assembly (FS manifold) position as needed for engines installed on aircraft maintenance.
During shop visit, full incorporation is recommended in accordance with the Service Bulletin Compliance Category .
Information in the Appendix Alternate Accomplishment Instructions (No) Progression Charts (No) Added Data (Y es) Revision to T able of Limits (No) Inspection Procedures (No) l March 14/18 PW4G-100-73-48
REVISION NO.
1 - April 24/18 Page 5
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Material Information Material — Cost and A vailability
1.
Part prices were not available at the time of Service Bulletin publication.
Contact Pratt & Whitney Spares Management & Logistics for firm quotations.
2.
There is no kit provided to do this Service Bulletin.
3.
Part availability information is provided in material data Instructions — Disposition.
Industry Support Program Not Applicable.
The material data that follows is for each engine.
NOTE :
It is possible to use the Chapter/Section and Figure/Item reference number shown below the old part number to find the part in the Illustrated Parts Catalog.
Because there are many dif ferent configurations used, it is frequently necessary to show more than one group of parts.
When this occurs, parts that are interchangeable are shown line-by-line only , unless this is shown dif ferently .
CAUTION :
THE
FOLLOWING MA TERIAL DA T A T
ABLE(S) ARE
ORGANIZED BY
ILLUSTRA TED P AR TS CA T ALOG.
ALL P AR TS IN THE T
ABLE(S) MA Y OR MA Y NOT BE
APPLICABLE T O ALL THE ENGINE MODELS SHOWN IN THE T ABLE HEADING.
YOU MUST REFER T O THE
APPROPRIA TE
ILLUSTRA TED P AR TS CA T ALOG FOR ENGINE MODEL
APPLICABILITY USING THE OLD P AR T NUMBER (PN) AND CA T ALOG
SEQUENCE NUMBER.
F AILURE T O INST ALL THE P AR T(S) IN THE
CORRECT ENGINE MODEL MA Y RESUL T IN A
CONFIGURA TION THA T IS NOT F AA APPROVED.
The material data that follows is for each engine.
For PW4164, PW4164-1D, PW4168, PW4168-1D, PW4168A, PW4168A-1D, PW4170 Engines:
New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 15 * BOL T MS9715-14 (73-1 1-00-5-260) (C) MS9715-16 14 * BOL T (A) MS9715-18 1 * BOL T (A) 53U193 1 *
BRACKET (A) 53U194 1 *
BRACKET (A) 53U195 1 *
BRACKET (A) 53U196 1 *
BRACKET (A) 53U197 1 *
BRACKET (A) 53U198 2 *
BRACKET (A) 53U199 2 *
BRACKET (A) 53U201 2 *
BRACKET (A) l March 14/18 PW4G-100-73-48
REVISION NO.
1 - April 24/18 Page 6
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 53U202 1 *
BRACKET (A) 53U203 1 *
BRACKET (A) 53U206 1 * HEA T SHIELD (A) 53U207-01 1 * HEA T SHIELD (A) 53U208-01 1 * HEA T SHIELD (A) 53U210-01 1 *
BRACKET (A) AN123470 2 * .RIVET (D) 53U21 1-01 1 *
BRACKET (A) 53U212 2 * W ASHER (A) 53U213 2 * SP ACER (A) ST1557-05 16 * CLAMP (A) AS3413-08 15 * BOL T (A) 776440 15 * NUT OPTION (A)(O1) ST5141-09 15 * W ASHER (A) 531 1624 13 * W ASHER (A) 1 *
MANIFOLD — SUPPL Y , FUEL NOZZLE (FS04),
ASSEMBL Y OF 50J958-01 (73-1 1-00-6-20 A) (C)(R) 7 *
MANIFOLD — SUPPL Y , FUEL NOZZLE (FS01 THRU FS03, FS05 THRU FS08),
ASSEMBL Y OF 50J959-01 (73-1 1-00-6-10 A) (C)(R) 1 * CLAMP ST1540-05 (73-1 1-00-6-90) (C1) 5 * BOL T MS9715-14 (73-1 1-00-5-260) (E) 16 * P ACKING ST1946-012 (73-1 1-00-7-1 C) (E) 24 * P ACKING ST1946-010 (73-1 1-00-6-1 B) (E) AR * TUBE —
TRANSFER 50J500 (73-1 1-00-7-10) (E) l March 14/18 PW4G-100-73-48
REVISION NO.
1 - April 24/18 Page 7
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition AR * SAFETY CABLE 56T581 (E) AR *
FERRULE 56T582 (E) Modification and Spares Information Estimated part prices are provided when they are available at time of publication.
The Estimate of Unit Price is only for planning purposes and does not constitute a firm quotation.
An asterisk (*) is shown where part pricing information was unavailable.
In either case, contact Pratt & Whitney Spares Management & Logistics for firm quotations.
Parts Modification Conditions Not Applicable.
Spare Parts A vailability (A) The new part is available.
(C) The old part will continue to be supplied.
(C1) The old part will continue to be supplied for use at other locations.
(D) The new part is a detail of the assembly .
It is available as a replacement part.
(E) The old part is an expendable item necessary to do this bulletin.
(O1) Nut Option, PN 776440, consists of a Nut, PN AS3066-09, PN AS3067-09, PN AS3068-09, PN AS3069-09 or PN AS3070-09.
(R) The part can be replaced with a new part or the old part can be repaired as specified in Reference 4, CIR Manual, Chapter/Section 72-41-40 Repair-03.
V endor Services or Special Components/Materials Special Components/Materials — Consumable Materials P&W Designation Qty Name P03-001 AR Engine Oil P06-021 (PW A 550-3) AR Anti-gallant Compound P06-053 AR Sealing Ring Lubricant NOTE :
EXCEPT FOR WORK OR
SUPPLIES T O BE
PERFORMED OR
FURNISHED BY PRA TT &
WHITNEY , IT IS
UNDERST OOD THA T PRA TT &
WHITNEY DOES NOT
ENDORSE THE WORK
PERFORMED BY THE COMP ANY OR COMP ANIES NAMED HEREIN OR ANY OTHER COMP ANY AND DOES NOT ACCEPT
RESPONSIBILITY T O ANY DEGREE FOR THE
SELECTION OF SUCH COMP ANY OR COMP ANIES FOR THE
PERFORMANCE OF ANY WORK OR
PROCUREMENT OF SUPPLIES.
Material Data for Each Spare Engine The material for each spare engine is as stated in the preceding material information section.
Reidentified Parts Not Applicable.
l March 14/18 PW4G-100-73-48
REVISION NO.
1 - April 24/18 Page 8
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Necessary T ools No more Support Equipment is necessary .
Other Material Information Data Not Applicable.
l March 14/18 PW4G-100-73-48
REVISION NO.
1 - April 24/18 Page 9
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Accomplishment Instructions NOTE :
Service Bulletin incorporation on engines installed on aircraft may be desirable and should be individually evaluated.
NOTE :
Partial incorporation of this Service Bulletin is permitted by fuel nozzle supply manifold assembly (FS manifold) position as needed for engines installed on aircraft maintenance.
During shop visit, full incorporation is recommended in accordance with the Service Bulletin Compliance Category .
For Engines Installed On Aircraft
1.
Open the fan cowl doors as specified in Reference 5, AMM.
W ARNING :
DO THE THRUST
REVERSER
DEACTIV A TION
PROCEDURE T O
PREVENT THE OPERA TION OF THE THRUST REVERSER.
ACCIDENT AL OPERA TION OF THE THRUST
REVERSER CAN CAUSE INJUR Y T O
PERSONS OR DAMAGE T O
EQUIPMENT .
2.
Do the deactivation procedure for the thrust reversers doors as specified in Reference 5, AMM.
3.
Open the cowl doors as specified in Reference 5, AMM.
W ARNING :
OBEY THE
INSTRUCTIONS IN THE
PROCEDURE T O OPEN THE THRUST REVERSERS.
IF YOU DO NOT OBEY THE
INSTRUCTIONS,
INJURIES T O
PERSONNEL, AND DAMAGE T O
EQUIPMENT CAN OCCUR.
4.
Open the thrust reverser doors as specified in Reference 5, AMM.
5.
Remove any hardware as required for access to the FS manifolds as specified in Reference 5, AMM.
6.
Locate the FS manifold (FS04) and remove and retain the Bolt, PN ST141 1-05 from the Clamp, PN ST1540-05.
See Figure 1, Sheet 1 and Figure 1, Sheet
2.
7.
Remove and discard the Clamp, PN ST1540-05.
W ARNING :
DO NOT ALLOW ENGINE FUEL T O REMAIN ON YOUR SKIN FOR A PERIOD OF TIME.
FLUSH FUEL FROM SKIN WITH W A TER.
THE FUEL IS
POISONOUS AND CAN GO
THROUGH SKIN AND INT O YOUR BODY .
CAUTION :
DO NOT ALLOW ENGINE FUEL T O LEAK ON THE ENGINE.
UNW ANTED FUEL MUST BE
REMOVED
IMMEDIA TEL Y WITH A CLEAN LINT -FREE CLOTH.
FUEL CAN CAUSE DAMAGE T O OTHER P AR TS ON THE ENGINE.
CAUTION :
TUBE DAMAGE MA Y OCCUR IF BACKUP WRENCH IS NOT
PROPERL Y USED.
8.
Disconnect all of the coupling nuts that attach the FS manifolds to the Fuel Nozzles (F/N).
Use a backup wrench on the wrenching flats.
See Figure 1, Sheet 2 and Figure
3.
9.
Disconnect all of the coupling nuts that attach the FS manifolds to the fuel supply tube assemblies (FM tubes).
Use a backup wrench on the wrenching flats.
See Figure 3 and Figure
4.
l March 14/18 PW4G-100-73-48
REVISION NO.
1 - April 24/18 Page 10
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
10.
Remove the FS Manifold (FS04), PN 50J958-01 and seven FS Manifolds (FS01 thru FS03, FS05 thru FS08), PN 50J959-01.
See Figure 1, Sheet
2.
NOTE :
FM tube clamps near the FS manifolds may need to be removed prior to the removal of the FS manifolds.
s 1
1.
Remove the T ransfer T ubes, PN 50J500 and two Packings, PN ST1946-012, from the eight FM tubes as follows.
See Figure
4.
A.
Remove and discard the 16 Packings, PN ST1946-012.
B.
Wipe clean the transfer tubes as specified in Reference 1, Standard Practices Manual, Chapter/Section 72-21-00, SPOP
208.
C.
Inspect the transfer tubes for signs of damage.
(1) If there are no signs of damage, retain the transfer tube for reuse.
(2) If there are signs of damage, discard the T ransfer T ube, PN 50J500.
12.
Remove and discard the 24 Packings, PN ST1946-010, from the FS manifolds and F/N pads.
See Figure 1, Sheet
1.
13.
Wipe clean the threads of the conical seats at F/N interface as specified in Reference 1, Standard Practices Manual, Chapter/Section 72-21-00, SPOP
208.
14.
Remove and discard the two Bolts, PN MS9715-14, on F/N
17.
See Figure
5.
15.
Position the Heat Shield, PN 53U207-01, at the appropriate location on F/N 17 as shown in Figure
5.
16.
Apply Engine Oil (P03-001), to the threads and bearing surface contact of the two new Bolts, PN MS9715-14.
17.
Install the Heat Shield, PN 53U207-01, on F/N 17 with two Bolts, PN MS9715-14, finger tight.
18.
T orque the two Bolts, PN MS9715-14, to 75 – 85 lbf-in
(8.47 –
9.60 N.m).
19.
Install the new or repaired FS Manifold (FS04), PN 50J958-01, that has new tube details installed as specified in Reference 4, CIR Manual, Chapter/Section 72-41-40 Repair-03, and install seven new or repaired FS Manifolds (FS01 thru FS03, FS05 thru FS08), PN 50J959-01, that have new tube details installed as specified in Reference 4, CIR Manual, Chapter/Section 72-41-40 Repair-03 as follows:
A.
Remove the protective covers from the new FS manifold fittings.
CAUTION :
T ORQUE LIMITS GIVEN IN THIS
DOCUMENT FOR OIL
LUBRICA TED P AR TS APPL Y
SPECIFICALL Y T O THE USE OF ENGINE OIL OR EQUIV ALENT .
UNLESS OTHER WISE
SPECIFIED, T ORQUES GIVEN IN THIS
DOCUMENT APPL Y WHEN
LUBRICA TION IS
APPLIED T O A T LEAST ONE OF THE P AIR OF SURF ACES THA T WILL
EXPERIENCE
RUBBING CONT ACT ;
WHERE ANTI
GALLANT IS WORN, REAPPL Y ANTI
GALLANT .
THE
APPLICA TION OF BOTH OIL AND ANTI
GALLANT ON THE SAME P AIR OF SURF ACES SHALL NOT BE USED.
B.
Re-apply anti-gallant on FM tubes at interface with FS manifolds if required.
See Figure
24.
l March 14/18 PW4G-100-73-48
REVISION NO.
1 - April 24/18 Page 1 1
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).