Service bulletin · Pratt & Whitney

No revision namedPW4G-112-A72-351 · 10 pages · 407 KB

© Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2018-0368; AD 2018-21-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2018-0368 (document 0007) · AD 2018-21-11

Manufacturer
Pratt & Whitney
Type
Alert Service Bulletin
Number
PW4G-112-A72-351

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 10Partly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers. © Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2018-0368; AD 2018-21-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'ce0951ea9565de81a28b7cd6d41b37db189722d836d9ec63b80c21a45582376d'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

██ ██ ALERT SER VICE

BULLETIN ENGINE — HUB

ASSEMBL Y , LOW

PRESSURE

COMPRESSOR (LPC) —

INSPECT THE LPC HUBS, PN 51B821 AND PN 52B521, FOR CRACKS MODEL

APPLICA TION PW4074D, PW4077D, PW4084D, PW4090, PW4090-3

BULLETIN ISSUE

SEQUENCE PW4G-1 12 Series A72-351 A T A NUMBER 72-31-00

UTC/P&W

PROPRIET AR Y

INFORMA TION This document is the property of United T echnologies Corporation — Pratt & Whitney (UTC/P&W).

Y ou may not possess, use, copy or disclose this document or any information in it, for any purpose, including without limitation to design, manufacture, or repair parts, or obtain F AA or other government approval to do so, without UTC/P&W's express written permission.

Neither receipt nor possession of this document alone, from any source, constitutes such permission.

Possession, use, copying or disclosure by anyone without UTC/P&W's express written permission is not authorized and may result in criminal and/or civil liability .

Export Classification:

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

Compliance Category 5 P&W Distribution Code 2641 February 22/18 PW4G-1 12-A72-351 Page 1 of 10 Published in United States of America

Summary The purpose of this Alert Service Bulletin is to supply instructions for an inspection of the af fected part number Low Pressure Compressor (LPC) hub assemblies (LPC hubs) for cracks.

The non-destructive inspection procedures, Eddy Current Inspection (ECI), and Fluorescent Penetrant Inspection (FPI) specified in Reference 4, CIR Manual, Chapter/Section 72-31-07 Inspection/Check-02 must be accomplished for the af fected LPC hubs at engine disassembly whenever the flange M is separated from the engine and the LPC hub has exceeded 2,000 cycles since last LPC hub non-destructive inspection as specified in Reference 4, CIR Manual, Chapter/Section 72-31-07 Inspection/Check-02.

At this time no cracks in service engines have been found.

Planning Information Ef fectivity Data Engine Models Applicable PW4074D, PW4077D, PW4084D, PW4090, PW4090-3 Engine Serial No.

— All engines with LPC hub PNs 51B821 and 52B521.

NOTE :

The engine serial number ef fectivity data and its related engine model identification contained in this Alert Service Bulletin are taken from the records of part(s) incorporation during initial manufacture.

After initial engine manufacture, but before final delivery , P&W may change part(s) in the engine or change the model identification of the engine.

Such action is recorded on F AA337 forms.

T o find Alert Service Bulletin PW4G-1 12-A72-351 models that are applicable, the owner/operator of the engine must compare the Alert Service Bulletin List supplied with the engine as sent from P&W and the List of Changes incorporated at the Airframer from F AA337 forms to the Alert Service Bulletin PW4G-1 12-A72-351 Ef fectivity section.

The PW4090 Engine ef fectivity is also applicable to all the PW4090 de-rate models (PW4074D, PW4077D, and PW4084D) unless otherwise specified.

Concurrent Requirements There are no concurrent requirements.

Reason

1.

Problem:

Updated analysis techniques have resulted in calculated life shortfalls for some configurations of the LPC hub.

2.

Cause:

Not applicable.

3.

Solution:

Inspect the af fected LPC hubs for cracks.

Description Inspect the af fected LPC hubs for cracks.

Compliance Category 5 February 22/18 PW4G-1 12-A72-351 Page 2

UTC/P&W

PROPRIET AR Y

INFORMA TION Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

Do when the engine is disassembled suf ficiently to give access to the changed subassembly

(i.e., module, accessories, components, build groups) and to all changed spare subassemblies.

NOTE :

The engine is considered disassembled suf ficiently whenever flange M is separated from the engine and the LPC hub has exceeded 2,000 cycles since last LPC hub non-destructive inspection as specified in Reference 4, CIR Manual, Chapter/Section 72-31-07 Inspection/Check-02.

Approval Data The times between inspections specified in Compliance and the inspection procedures specified in the Accomplishment Instructions agree with the applicable Federal A viation Regulations and are F AA-Approved for the engine model(s) given.

Manpower The estimate of man-hours of labor directly necessary to do the intent of this Alert Service Bulletin are as follows:

1.

Necessary to do the additional Assembly and Disassembly .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

30 hours

2.

Necessary to the Inspection and Repairs .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

20 hours

3.

T otal Necessary Man-hours .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

50 hours W eight Data No Change.

Electrical Load Data Not Applicable.

Software Accomplishment Summary Not Applicable.

References

1.

T urbojet Engine Standard Practices Manual, Part No.

585005.

2.

PW4074D, PW4077D, PW4084D, PW4090, PW4090-3, PW4090D, PW4098 T urbofan Engines, Illustrated Parts Catalog, Part No.

51A742.

3.

PW4074D, PW4077D, PW4084D, PW4090, PW4090-3, PW4090D, PW4098 T urbofan Engines, Engine Manual, Part No.

51A751.

4.

PW4000 Series 1 12 Inch PW4074, PW4077, PW4077D, PW4084D, PW4090, PW4098 T urbofan Engines, Engine Cleaning, Inspection And Repair (CIR) Manual, Part No.

51A750.

Publications Changed None.

Interchangeability Not Applicable.

February 22/18 PW4G-1 12-A72-351 Page 3

UTC/P&W

PROPRIET AR Y

INFORMA TION Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

Information in the Appendix Alternate Accomplishment Instructions (No) Progression Charts (No) Added Data (Y es) Revision to T able of Limits (No) Inspection Procedures (No) February 22/18 PW4G-1 12-A72-351 Page 4

UTC/P&W

PROPRIET AR Y

INFORMA TION Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

Material Information Material — Cost and A vailability There is no material cost to do this alert Service Bulletin if no cracks are found in the LPC hubs.

Industry Support Program Not Applicable.

The material data that follows is for each engine.

NOTE :

It is possible to use the Chapter/Section and Figure/Item reference number shown below the old part number to find the part in the Illustrated Parts Catalog.

Because there are many dif ferent configurations used, it is frequently necessary to show more than one group of parts.

When this occurs, parts that are interchangeable are shown line-by-line only , unless this is shown dif ferently .

CAUTION :

THE

FOLLOWING MA TERIAL DA T A T

ABLE(S) ARE

ORGANIZED BY

ILLUSTRA TED P AR TS CA T ALOG.

ALL P AR TS IN THE T

ABLE(S) MA Y OR MA Y NOT BE

APPLICABLE T O ALL THE ENGINE MODELS SHOWN IN THE T ABLE HEADING.

YOU MUST REFER T O THE

APPROPRIA TE

ILLUSTRA TED P AR TS CA T ALOG FOR ENGINE MODEL

APPLICABILITY USING THE OLD P AR T NUMBER (PN) AND CA T ALOG

SEQUENCE NUMBER.

F AILURE T O INST ALL THE P AR T(S) IN THE

CORRECT ENGINE MODEL MA Y RESUL T IN A

CONFIGURA TION THA T IS NOT F AA APPROVED.

The material data that follows is for each engine.

For PW4074D, PW4077D, PW4084D, PW4090, PW4090-3 Engines:

New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 1 HUB —

ASSEMBL Y OF , LPC 51B821 (72-31-00-4-10)

(4)(X) OR 1 HUB —

ASSEMBL Y OF , LPC 52B521 (72-31-00-4-10 A)

(4)(X) Modification and Spares Information Estimated part prices are provided when they are available at time of publication.

The Estimate of Unit Price is only for planning purposes and does not constitute a firm quotation.

An asterisk (*) is shown where part pricing information was unavailable.

In either case, contact Pratt & Whitney Spares Management & Logistics for firm quotations.

Parts Modification Conditions

(4) Do an inspection as specified in the Accomplishment Instructions.

Spare Parts A vailability (X) See Reference 2 or 3, Illustrated Parts Catalog for applicable replacement parts.

February 22/18 PW4G-1 12-A72-351 Page 5

UTC/P&W

PROPRIET AR Y

INFORMA TION Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

Cleaning, Inspection and Repair Information Not applicable.

V endor Services or Special Components/Materials Not applicable.

Material Data for Each Spare Engine The material for each spare engine is as stated in the preceding material information section.

Reidentified Parts Not Applicable.

Necessary T ools No more Support Equipment is necessary .

Other Material Information Data Not Applicable.

February 22/18 PW4G-1 12-A72-351 Page 6

UTC/P&W

PROPRIET AR Y

INFORMA TION Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

Accomplishment Instructions Non-Destructive Inspection For Low Pressure Compressor (LPC) Hub Assembly (LPC Hub), PN 51B821 And PN 52B521

1.

Disassemble the engine to remove the LPC as specified in Reference 3, Engine Manual, Chapter/Section 72-00-00 Removal-00.

2.

Remove the No.

1 bearing and seal assembly as specified in Reference 3, Engine Manual, Chapter/Section 72-00-31 Removal-04, EFF:4090.

3.

Put marks and/or record the circumferential position of the LPC hub relative to the LPC drum so that the LPC hub can be removed and then reassembled to the LPC drum with the same circumferential orientation.

4.

Remove all the balance weights that are marked “TB” and any spring loaded weights from the fan hub’ s balance weight flange.

5.

Record the PN, class, identification markings (if any), and position of all of the other balance weights that are installed on the LPC hub balance flange.

These weights may be identified as “F AN”, “HUB”, or they may have no identification markings.

Remove these balance weights as specified in Reference 3, Engine Manual, Chapter/Section 72-31-01 Disassembly-01, EFF:4090.

These weights will be re-installed when the LPC hub is reassembled to the LPC module.

6.

Remove the fan hub from the LPC module as specified in Reference 3, Engine Manual, Chapter/Section 72-31-01, Disassembly-01, EFF:4090.

NOTE :

Do not remove the LPC stators from the module.

7.

Remove the tierods from the front flange of the LPC drum rotor as specified in Reference 3, Engine Manual, Chapter/Section 72-31-01, Disassembly-01, EFF:4090.

8.

V isually inspect the exposed hardware for cracks and damage which will prevent proper functioning.

No cracks allowed.

9.

Fully inspect and repair/refurbish the fan hub tierods and tierod nuts as specified in Reference 4, CIR Manual, Chapter/Section 72-31-12 and 72-31-13.

10.

Clean the fan hub as specified in Reference 4, CIR Manual, Chapter/Section 72-31-07, Inspection/Check-01.

1.

Perform the non-destructive inspections (FPI and ECI) of the fan hub as specified in Reference 4, CIR Manual, Chapter/Section 72-31-07, Inspection/Check-02.

12.

For the fan hubs that are acceptable to the CIR non-destructive inspection requirements, visually inspect and repair/refurbish the fan hub as required as specified in Reference 4, CIR Manual, Chapter/Section 72-31-07, Inspection/Check-03 Configuration-1.

NOTE :

Since it has been removed to accomplish the FPI and ECI procedures anti-gallant restoration as specified in Reference 4, CIR Manual, Chapter/Section 72-31-07, Repair-02 will be required.

As part of the anti-gallant restoration the fan hub may require shot peen of the blade slots.

Due to its critical nature shot peen of the blade slots is a source demonstration operation which must be performed by an approved source as identified in Repair-02.

13.

If a fan hub is found to be unacceptable to either the FPI or ECI requirements, remove it from service and contact your P&W Field Of fice/Representative for further instructions.

Y ou cannot install a dif ferent fan hub to the LPC module.

February 22/18 PW4G-1 12-A72-351 Page 7

UTC/P&W

PROPRIET AR Y

INFORMA TION Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

14.

For reassembly of the fan hub and installation of the LPC module and removed hardware treat “A” fits as “B” fits.

15.

Install the tierods to the front flange of the LPC drum rotor as specified in Reference 3, Engine Manual, Chapter/Section 72-31-01, Assembly-01, EFF:4090.

16.

Reinstall all of the balance weights to the fan hub that were removed in Step

5.

above.

Reinstall each weight in its original position as specified in Reference 3, Engine Manual, Chapter/Section 72-31-01, Assembly-08, EFF:4090 and Assembly-10, EFF:4090.

17.

Reinstall the fan hub using the previously recorded marks/circumferential positioning relative to the LPC drum as specified in Reference 3, Engine Manual, Chapter/Section 72-31-01, Assembly-07, EFF:4090.

18.

Install the No.

1 Bearing and Seal Assembly as specified in Reference 3, Engine Manual, Chapter/Section 72-00-31 Install-04, EFF:4090.

19.

Install the LPC module as specified in Reference 3, Engine Manual, Chapter/Section 72-00-00 Install-10.

February 22/18 PW4G-1 12-A72-351 Page 8

UTC/P&W

PROPRIET AR Y

INFORMA TION Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

Page 9OCROpen in PDF

Pratt & Whitney A United Technologies Company 51B821 OR 52B521

LPC HUB

INSPECT AS SPECIFIED

IN THE ACCOMPLISHMENT

INSTRUCTIONS B527237

LOCATION OF THE LPC HUB 72-31-00 FIGURE 1 February 22/18 PW4G-112-A72-351 Page 9

UTC/P&W PROPRIETARY INFORMATION Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3).

Appendix Added Data Internal Reference Information Revision No.

Reference Document Origination Original EA 17KC831 EB/RCM Number values shown in parentheses adjacent to U.S.

values are International System of units (SI) equivalents.

February 22/18 PW4G-1 12-A72-351 Page 10

UTC/P&W

PROPRIET AR Y

INFORMA TION Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).