On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 15Partly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers. © Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2023-0940; AD 2023-19-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '7332e05d08347a169e422e8e5dd1e5b229ab151d865939c8a34f5f3f0cae0699' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '7332e05d08347a169e422e8e5dd1e5b229ab151d865939c8a34f5f3f0cae0699' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
██ ██ ALERT SER VICE
BULLETIN
REVISION NOTICE ENGINE — HUB
ASSEMBL Y , LOW
PRESSURE
COMPRESSOR (LPC) — DO A
REPETITIVE EDDY
CURRENT
INSPECTION OF THE LPC HUB
ASSEMBL Y BLADE SLOTS FOR CRACKS T urbojet Engine Service Bulletin No.
PW4G-1 12-A72-362 Revision No.
2 dated August 2, 2023.
Revision History Original Issue May 13, 2022 Revision 1 dated January 20, 2023 Revision 2 dated August 2, 2023 Reason for the Revision T o update the Accomplishment Instructions for the Eddy Current Inspection (ECI) of the Low Pressure Compressor (LPC) hub assembly .
T o update Reference 10, Non-Destructive Inspection Procedure 1 193 (NDIP-1
193) dated March 7, 2022, or later approved revision.
T o make editorial changes that do not af fect the technical content of this Service Bulletin.
Ef fect of Revision on Prior Compliance None.
This is a Complete Revision (Not Applicable to the SGML version) The contents are in accordance with the list of ef fective pages.
All pages have the current revision number .
T echnical changes are marked with black bars.
MODEL
APPLICA TION PW4074, PW4074D, PW4077, PW4077D, PW4084D, PW4090, PW4090-3
BULLETIN ISSUE
SEQUENCE PW4G-1 12 Series A72-362 Page Revision No.
Date 1 thru 1 1 2 August 2/23 A copy of this Revision Notice and any future revision notices must be filed as a permanent record with your copy of the subject bulletin.
P&W Distribution Code 2641 PW4G-1 12-A72-362 Page 1 of 1 Published in United States of America Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
██ ██
██ ██ ALERT SER VICE
BULLETIN ENGINE — HUB
ASSEMBL Y , LOW
PRESSURE
COMPRESSOR (LPC) — DO A
REPETITIVE EDDY
CURRENT
INSPECTION OF THE LPC HUB
ASSEMBL Y BLADE SLOTS FOR CRACKS MODEL
APPLICA TION PW4074, PW4074D, PW4077, PW4077D, PW4084D, PW4090, PW4090-3
BULLETIN ISSUE
SEQUENCE PW4G-1 12 Series A72-362 A T A NUMBER 72-31-00 R TX/P&W
PROPRIET AR Y
INFORMA TION This document is the property of Raytheon T echnologies Corporation — Pratt & Whitney (R TX/P&W).
Y ou may not possess, use, copy or disclose this document or any information in it, for any purpose, including without limitation to design, manufacture, or repair parts, or obtain F AA or other government approval to do so, without R TX/P&W's express written permission.
Neither receipt nor possession of this document alone, from any source, constitutes such permission.
Possession, use, copying or disclosure by anyone without R TX/P&W's express written permission is not authorized and may result in criminal and/or civil liability .
Export Classification:
Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
F AA Airworthiness Directive Directive No.
2018-21-1 1 Compliance Category 3 P&W Distribution Code 2641 l May 13/22 PW4G-1 12-A72-362
REVISION NO.
2 - August 2/23 Page 1 of 1 1 Published in United States of America
Summary The purpose of this Alert Service Bulletin is to provide instructions to do an initial and repetitive Eddy Current Inspection (ECI) of the Low Pressure Compressor (LPC) hub assembly for cracks.
Y ou must do the ECI while you follow Non-Destructive Inspection Procedure 1 193 (NDIP-1
193) for the specified LPC hub assemblies at the initial threshold and intervals as specified in the accomplishment instructions of this Alert Service Bulletin.
NOTE :
This Alert Service Bulletin supersedes and is a closing action for inspections necessary in Reference 8, Alert Service Bulletin No.
PW4G-1 12-A72-351;
Engine — Hub Assembly , Low Pressure Compressor (LPC) — Inspect the LPC Hubs, PN 51B821, For Cracks, Issue Sequence A72-351, PW4G-1 12 Series.
However , you must do the LPC hub assembly piece part inspections as specified in References 4 and 5, Engine Manual, Chapter/Section 05-10-01, Paragraph 5, Critical Life Limited Part Inspection and Critical Part Inspection.
NOTE :
The LPC hub assembly ECI necessary for this Alert Service Bulletin is in addition to and is not a substitute for the non-destructive inspections of the LPC hub assembly as specified in Reference 6, Cleaning, Inspection And Repair (CIR) Manual, Chapter/Section 72-31-07, INSP/CHK-02, CONFIG-1.
Planning Information Ef fectivity Data Engine Models Applicable PW4074, PW4074D, PW4077, PW4077D, PW4084D, PW4090, PW4090-3 Engine Serial No.
— All engines NOTE :
The engine serial number ef fectivity data and its related engine model identification contained in this Alert Service Bulletin are taken from the records of part(s) incorporation during initial manufacture.
After initial engine manufacture, but before final delivery , P&W may change part(s) in the engine or change the model identification of the engine.
Such action is recorded on F AA337 forms.
T o find Alert Service Bulletin PW4G-1 12-A72-362 models that are applicable, the owner/operator of the engine must compare the Service Bulletin List supplied with the engine as sent from P&W and the List of Changes incorporated at the Airframer from F AA337 forms to the Alert Service Bulletin PW4G-1 12-A72-362 Ef fectivity section.
The PW4090 engine ef fectivity is also applicable to all the PW4090 de-rate models (PW4074D, PW4077D, and PW4084D) unless otherwise specified.
Concurrent Requirements There are no concurrent requirements.
Reason
1.
Problem:
An analysis of the LPC hub assembly shows decreased life limits.
2.
Cause:
Not applicable.
3.
Solution:
Do an inspection of the LPC hub assembly for cracks.
Remove all LPC hub assemblies from service that do not meet the acceptance criteria of the non-destructive inspection procedure and contact your P&W Field Of fice/Representative for more instructions.
l May 13/22 PW4G-1 12-A72-362
REVISION NO.
2 - August 2/23 Page 2
RTX/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Description Do an inspection of the LPC hub assembly for cracks.
Compliance Category 3 Initial Inspection:
Do an initial Eddy Current Inspection (ECI) of the LPC hub assembly in a maximum of 550 cycles after the issue date of this Alert Service Bulletin.
Repetitive Inspection:
For a LPC hub assembly that is in the limits of the initial inspection of this Alert Service Bulletin, do a repetitive ECI of the LPC hub assembly for a maximum of each 550 cycles.
Approval Data The times between inspections specified in Compliance and the inspection procedures specified in the Accomplishment Instructions agree with the applicable Federal A viation Regulations and are F AA-Approved for the engine model(s) given.
This Service Bulletin is approved by the F AA Manager , ECO Branch, by letter dated June 01, 2022, as an Alternative Method of Compliance (AMOC) for Reference 9, Airworthiness Directive 2018-21-1 1, paragraph
(g)(3).
Manpower The estimate of man-hours of labor directly necessary to do the intent of this Alert Service Bulletin are as follows:
For LPC Hub Assemblies with Fan Blades Installed
1.
Necessary to Gain and Close Access .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3.0 hours
2.
Necessary to Do the ECI .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1.0 hours
3.
T otal Necessary Man-hours .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
14.0 hours For LPC Hub Assemblies without Fan Blades Installed
1.
Necessary to Do the ECI .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1.0 hours
2.
T otal Necessary Man-hours .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1.0 hours W eight Data No Change.
Electrical Load Data Not Applicable.
Software Accomplishment Summary Not Applicable.
References
1.
T urbojet Engine Standard Practices Manual, Part No.
585005.
2.
PW4074, PW4077 T urbofan Engines, Illustrated Parts Catalog, Part No.
51A346.
3.
PW4074D, PW4077D, PW4084D, PW4090, PW4090-3, PW4090D, PW4098 T urbofan Engines, Illustrated Parts Catalog, Part No.
51A742.
l May 13/22 PW4G-1 12-A72-362
REVISION NO.
2 - August 2/23 Page 3
RTX/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
4.
PW4074, PW4077 T urbofan Engines, Engine Manual, Part No.
51A345.
5.
PW4074D, PW4077D, PW4084D, PW4090, PW4090-3, PW4090D, PW4098 T urbofan Engines, Engine Manual, Part No.
51A751.
6.
PW4000 Series 1 12 Inch PW4074, PW4077, PW4077D, PW4084D, PW4090, PW4098 T urbofan Engines, Engine Cleaning, Inspection And Repair (CIR) Manual, Part No.
51A750.
7.
Boeing 777 Aircraft Maintenance Manual.
8.
Alert Service Bulletin No.
PW4G-1 12-A72-351;
Engine — Hub Assembly , Low Pressure Compressor (LPC) — Inspect The LPC Hubs, PN 51B821 And PN 52B521, For Cracks.
Issue Sequence A72-351, PW4G-1 12 Series.
9.
Airworthiness Directive 2018-21-1 1, Fluorescent penetrant inspection (FPI) and eddy current inspection (ECI) of PW4074D, PW4077D, PW4084D, PW4090, and PW4090-3 engines with fan hub, part number (P/N) 51B821 or P/N 52B521, installed.
10.
Non-Destructive Inspection Procedure 1 193 (NDIP-1
193), PW4000 Fan Hub Blade Slot Bottom Manual Eddy Current Inspection LPC Module Assy , Piece-part or Engine (On-Wing or Of f-Wing with Fan Blades Removed) dated March 7, 2022, or later approved revision.
1.
F AA Alternative Method of Compliance Letter .
Publications Changed PW4074, PW4077 T urbofan Engines, Illustrated Parts Catalog, Part No.
51A346.
72-31-00, Figure 4 PW4074D, PW4077D, PW4084D, PW4090, PW4090-3, PW4090D, PW4098 T urbofan Engines, Illustrated Parts Catalog, Part No.
51A742.
72-31-00, Figure 4 Interchangeability Not applicable.
Information in the Appendix Alternate Accomplishment Instructions (No) Progression Charts (No) Added Data (Y es) Revision to T able of Limits (No) Inspection Procedures (No) l May 13/22 PW4G-1 12-A72-362
REVISION NO.
2 - August 2/23 Page 4
RTX/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Material Information Material — Cost and A vailability
1.
Part prices were not available at the time of Alert Service Bulletin publication.
Contact Pratt & Whitney Spares Management & Logistics for firm quotations.
2.
There is no kit provided to do this Alert Service Bulletin.
3.
Part availability information is provided in material data Instructions — Disposition.
Industry Support Program Not Applicable.
The material data that follows is for each engine.
NOTE :
It is possible to use the Chapter/Section and Figure/Item reference number shown below the old part number to find the part in the Illustrated Parts Catalog.
Because there are many dif ferent configurations used, it is frequently necessary to show more than one group of parts.
When this occurs, parts that are interchangeable are shown line-by-line only , unless this is shown dif ferently .
CAUTION :
THE
FOLLOWING MA TERIAL DA T A T
ABLE(S) ARE
ORGANIZED BY
ILLUSTRA TED P AR TS CA T ALOG.
ALL P AR TS IN THE T
ABLE(S) MA Y OR MA Y NOT BE
APPLICABLE T O ALL THE ENGINE MODELS SHOWN IN THE T ABLE HEADING.
YOU MUST REFER T O THE
APPROPRIA TE
ILLUSTRA TED P AR TS CA T ALOG FOR ENGINE MODEL
APPLICABILITY USING THE OLD P AR T NUMBER (PN) AND CA T ALOG
SEQUENCE NUMBER.
F AILURE T O INST ALL THE P AR T(S) IN THE
CORRECT ENGINE MODEL MA Y RESUL T IN A
CONFIGURA TION THA T IS NOT F AA APPROVED.
The material data that follows is for each engine.
For PW4074, PW4077 Engines:
New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 1 * HUB — ASSY OF , LPC 51B631 (72-31-00-4-10)
(4)(X) 1 .HUB — LPC 51B601
(4)(X) OR 1 * HUB — ASSY OF , LPC 51B821 (72-31-00-4-10 A)
(4)(X) 1 .HUB — LPC 51B801
(4)(X) OR 1 * HUB — ASSY OF , LPC 52B521 (72-31-00-4-10 B)
(4)(X) 1 .HUB — LPC 52B501
(4)(X) OR l May 13/22 PW4G-1 12-A72-362
REVISION NO.
2 - August 2/23 Page 5
RTX/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 1 * HUB — ASSY OF , LPC 52B421 (72-31-00-4-10 C)
(4)(X) 1 .HUB — LPC 52B401
(4)(X) The material data that follows is for each engine.
For PW4074D, PW4077D, PW4084D, PW4090, PW4090-3 Engines:
New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 1 * HUB — ASSY OF , LPC 51B821 (72-31-00-4-10)
(4)(X) 1 .HUB — LPC 51B801
(4)(X) OR 1 * HUB — ASSY OF , LPC 52B521 (72-31-00-4-10 A)
(4)(X) 1 .HUB — LPC 52B501
(4)(X) OR 1 * HUB — ASSY OF , LPC 52B421 (72-31-00-4-10 B)
(4)(X) 1 .HUB — LPC 52B401
(4)(X) Modification and Spares Information Estimated part prices are provided when they are available at time of publication.
The Estimate of Unit Price is only for planning purposes and does not constitute a firm quotation.
An asterisk (*) is shown where part pricing information was unavailable.
In either case, contact Pratt & Whitney Spares Management & Logistics for firm quotations.
Parts Modification Conditions
(4) Do an inspection as specified in the Accomplishment Instructions.
Spare Parts A vailability (X) See Reference 2 or 3, Illustrated Parts Catalog for applicable replacement parts.
V endor Services or Special Components/Materials Not Applicable.
Material Data for Each Spare Engine The material for each spare engine is as stated in the preceding material information section.
Reidentified Parts Not Applicable.
l May 13/22 PW4G-1 12-A72-362
REVISION NO.
2 - August 2/23 Page 6
RTX/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Necessary T ools No more Support Equipment is necessary .
Other Material Information Data Not Applicable.
l May 13/22 PW4G-1 12-A72-362
REVISION NO.
2 - August 2/23 Page 7
RTX/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Accomplishment Instructions NOTE :
Y ou can take credit for any initial and/or repetitive ECI inspections in accordance with Reference 10, NDIP-1 193 dated March 7, 2022, or later approved revision, performed prior to issuance of this Alert Service Bulletin.
NOTE :
T o get a copy of the ECI procedures specified in Reference 10, NDIP-1 193 dated March 7, 2022, or later approved revision, please contact Pratt & Whitney Non-Destructive Evaluation (NDE) through the EagleNet system or the Pratt & Whitney Global Operations Center 24-hour help desk.
NOTE :
NDIP-1 193 is for the inspection of an LPC hub assembly installed in an LPC module, an on-wing or of f-wing assembled engine configuration or piece-part level with the fan blades removed.
This inspection is a manual ECI developed to support field or shop inspection for the PW4000-1 12 fan hub blade slots.
Y ou cannot do an inspection of the aft
1.5 inches of the blade slot with the LPC hub assembly installed.
Y ou can use the same procedure/hardware to do an inspection of the slot regardless of the LPC hub assembly level.
Piece-part level is identified as an LPC hub assembly that is disassembled to one of the part levels specified in Reference 6, CIR 51A750, 72-31-07, INSP/CHK-00.
For Engines Installed On Aircraft
1.
Remove the compressor inlet cone, LPC fan blades, and fan blade fairings as specified in Reference 7, Boeing 777 Aircraft Maintenance Manual, Chapter/Section 72-31-02 for access to do the ECI of the LPC hub assembly blade slots.
2.
Do an ECI of the LPC hub assembly blade slots as specified in Reference 10, NDIP-1 193 dated March 7, 2022, or later approved revision.
See Figure
1.
A.
LPC hub assemblies with no rejectable indications in accordance with the requirements of Reference 10, NDIP-1 193 Section VI.B.
in all blade slots can continue-in-service until the next necessary repetitive ECI.
B.
If the indications are more than the rejection criteria in Reference 10, NDIP-1 193 Section VI.B.
after the cleaning steps, reject the part and remove from service.
Use the Certificate of Non-Conformance (CONC) file and provide the results with photos of the indication in question.
Contact your local field service representative to return the LPC hub assembly to P&W MPE/NDE.
If possible, provide photos of the af fected area of the blade slot(s) where the indications were detected.
For rejected LPC hub assemblies, notify P&W Customer T echnical Services (CTS) through an EagleNet case addressed to a member of the CTS PW4000-1 12 F
AN-LPC-INT
CASE-HPC EagleNet team.
Include the part number , serial number , total time, and total cycles of the LPC hub assembly .
If the LPC hub assembly had an ECI before this Alert Service Bulletin, include the total time and total cycles since the last ECI.
C.
If the indications are more than the reportable criteria in Reference 10, NDIP-1 193 Section VI.A.
but are below the rejection criteria in Section VI.B.
after the cleaning steps, use the Certificate of Conformance (COC) file and provide the results with photos of the indication in question to P&W MPE/NDE.
If possible, provide photos of the af fected area of the blade slot(s) where the indications were detected.
For LPC hub assemblies with reportable indications, notify P&W CTS through an EagleNet case addressed to a member of the CTS PW4000-1 12 F
AN-LPC-INT
CASE-HPC EagleNet team.
Include the part number , serial number , total time, and total cycles of the LPC hub assembly .
If the LPC hub assembly had an ECI before this Alert Service Bulletin, include the total time and total cycles since the last ECI.
l May 13/22 PW4G-1 12-A72-362
REVISION NO.
2 - August 2/23 Page 8
RTX/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
3.
Install the LPC fan blades, fan blade fairings, and compressor inlet cone as specified in Reference 7, Boeing 777 Aircraft Maintenance Manual, Chapter/Section 72-31-02.
For Engines Not Installed On Aircraft
1.
Remove the compressor inlet cone as specified in Reference 4 or 5, EM, Chapter/Section 72-00-31, Removal-02.
2.
Remove the LPC fan blades and fan blade fairings as specified in Reference 4 or 5, EM, Chapter/Section 72-00-31, Removal-03 for access to do the ECI of the LPC hub assembly blade slots.
3.
Do an ECI of the LPC hub assembly blade slots as specified in Reference 10, NDIP-1 193 dated March 7, 2022, or later approved revision.
See Figure
1.
A.
LPC hub assemblies with no rejectable indications in accordance with the requirements of Reference 10, NDIP-1 193 Section VI.B.
in all blade slots can continue-in-service until the next necessary repetitive ECI.
B.
If the indications are more than the rejection criteria in Reference 10, NDIP-1 193 Section VI.B.
after the cleaning steps, reject the part and remove from service.
Use the Certificate of Non-Conformance (CONC) file and provide the results with photos of the indication in question.
Contact your local field service representative to return the LPC hub assembly to P&W MPE/NDE.
If possible, provide photos of the af fected area of the blade slot(s) where the indications were detected.
For rejected LPC hub assemblies, notify P&W Customer T echnical Services (CTS) through an EagleNet case addressed to a member of the CTS PW4000-1 12 F
AN-LPC-INT
CASE-HPC EagleNet team.
Include the part number , serial number , total time, and total cycles of the LPC hub assembly .
If the LPC hub assembly had an ECI before this Alert Service Bulletin, include the total time and total cycles since the last ECI.
C.
If the indications are more than the reportable criteria in Reference 10, NDIP-1 193 Section VI.A.
but are below the rejection criteria in Section VI.B.
after the cleaning steps, use the Certificate of Conformance (COC) file and provide the results with photos of the indication in question to P&W MPE/NDE.
If possible, provide photos of the af fected area of the blade slot(s) where the indications were detected.
For LPC hub assemblies with reportable indications, notify P&W CTS through an EagleNet case addressed to a member of the CTS PW4000-1 12 F
AN-LPC-INT
CASE-HPC EagleNet team.
Include the part number , serial number , total time, and total cycles of the LPC hub assembly .
If the LPC hub assembly had an ECI before this Alert Service Bulletin, include the total time and total cycles since the last ECI.
4.
Install the LPC fan blades and fan blade fairings as specified in Reference 4 or 5, EM, Chapter/Section 72-00-31, Installation-03.
5.
Install the compressor inlet cone as specified in Reference 4 or 5, EM, Chapter/Section 72-00-31, Installation-02.
l May 13/22 PW4G-1 12-A72-362
REVISION NO.
2 - August 2/23 Page 9
RTX/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
51B631, 51B821, 52B521, AND 52B421
LPC HUB ASSEMBLY
DO AN INSPECTION AS SPECIFIED
IN THE ACCOMPLISHMENT INSTRUCTIONS B530089
LOCATION OF THE LPC HUB ASSEMBLY 72-31-00 FIGURE 1 May 13/22 PW4G-112-A72-362 REVISION NO. 2 - August 2/23 Page 10
RTX/P&W PROPRIETARY INFORMATION Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3).