On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 10Partly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers. © Rockwell Collins. Filed by the FAA in regulations.gov docket FAA-2020-0883; AD 2021-05-17 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '71a3374b346b163b6e4768be6c54723a6d6dbd8bcdce46a2cb998d4882119d9b' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '71a3374b346b163b6e4768be6c54723a6d6dbd8bcdce46a2cb998d4882119d9b' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Service Information Letter 523-0826420-201000 Service Information Letter FDSA-6500-19-1 REVISION NO. 2
DISPLA Y TCAS FL Y-TO CUE UPDATE - SOFTWARE DOWNLOAD INSTRUCTIONS
TRANSMITT AL INFORMA TION SUMMARY Summary This is revisi on 2 of Service Information Letter (SIL) FDSA-6500-19-1 for the FDSA-6500 Flight Display Software Application.
This revision updates Sections D. and E., and adds Section F .
Black bars in the margins indicate the change.
Replace revision 1 with this revision.
Service Information Letter Revision History
REVISION DATE OF RELEASE Initial Release June 3, 2019 Revision 1 June 4, 2019 Revision 2 June 12, 2019 Export Classification Number for this document is 7E994.
DUE TO THE US GOVERNMENT’S IMPLEMENT A TION OF EXPORT CONTROL REFORM (ECR), ALL EXPORT DA T A PROVIDED
IN THIS PUBLICA TION IS CURRENT AS OF THE LAST REVISION DA TE AND MA Y BE SUBJECT TO CHANGE BY ROCKWELL COLLINS. THEREFORE, PLEASE BE ADVISED THA T YOU ARE ENCOURAGED TO VALIDA TE THE ACCURACY OF THE DA T A PRIOR TO ANY FUTURE EXPORT ACTIVITY RELA TING TO THESE PUBLICA TIONS.
© 2019 Rockwell Collins. All rights reserved.
Jun 3/19 FDSA-6500-19-1 2-Jun 12/19 P a g e1o f1 0
Service Information Letter Software License and General Conditions of Sale For each software license procured, the Software License f or Equipment Specific Software, reproduced below, shall apply .
Software License for Equipment Specific Software Software delivered hereunder, either embedded in equipment descr ibed herein or specifically designed for use in or with such equipment, is copyrighted by the seller and shall remain the sole and exclusive property of seller. Seller grants the buyer a perpetual, worldwide, non-exclusive license to use the software only in or with the equipment. The buyer shall not copy , modify , or disassemble the software, or permit others to do so. Buyer shall not transfer the license granted hereby or possession of the software except as part of or with the equipment, such transfer being subject to the restrictio ns contained herein. Seller may terminate this license upon written notice for violation of any of the terms of the foregoing license.
Should the customer have any questions concerning the scope of permitted use, please contact your Rockwell Customer Service Engineer.
Rockwell Collins' General Conditions of Sale 074-8431-866 (Rev 04/15) are incorporated herein by reference.
Jun 3/19 FDSA-6500-19-1 2-Jun 12/19 Page 2
Service Information Letter A. Effectivity The information in this SIL is applicable to the FDSA-6500 Flight Display Software Application listed in the following table.
UNIT NOMENCLATURE
ROCKWELL COLLINS
P ART NUMBER (CPN) FDSA-6500 Flight Displa y Software Application 810-0234-1H0001 FDSA-6500 Flight Display Software Application 810-0234-1H0002 FDSA-6500 Flight Display Software Application 810-0234-1H0003 FDSA-6500 Flight Displ ay Software Application 810-0234-2C0001 FDSA-6500 Flight Display Software Application 810-0234-2C0002 FDSA-6500 Flight Display Software Application 810-0234-2H0001 FDSA-6500 Flight Displ ay Software Application 810-0234-4B0001 B. Issue Summary
(1) The T raffic Collision Avoidance System (TCAS) Fly-T o Cue indication on the primary cockpit displays may conflict with other TCAS system information (e.g. aural cues) during a Resolution Advisory (RA) scenario. Specifically , the TCAS Fly-T o Cue vertical position on the Attitude Direction Indicator (ADI) pitch tape is displayed relative to the aircraft horizon line instead of the aircraft symbol. The potential conflict between displayed indications and TCAS aural cues could adversely affect the pilot decision-making process and may lead the pilot to over/under-correct which may result in u nintended reduction in aircraft separation.
(2) The TCAS Line Replaceable Unit (LRU) outputs are correct, and compliant with requirements, and the aural call-outs for the pilot are correct. The issue has been isolated to the FDSA-6500 software where the command data from the TCAS equipment is being translated incorrectly prior to display of TCAS Resolution Advisory pitch indications on the AFD-3700.
C. Replacement Effectivity
(1) The following table shows the replacement FDSA-6500 software CPNs for each version that is obsolete due to the TCAS non-compliance.
PLATFORM OBSOLETE CPN REPLACEMENT CPN King Air C90, B200 & B300 810-0234-1H0001 810-0234-1H0101 King Air C90, B200 & B300 810-0234-1H0002 810-0234-1H0102 King Air C90, B200 & B300 810-0234-1H0003 810-0234-1H0103 PL II Ki ng Air B200 & B300 810-0234-2H0001 810-0234-2H0101 Jun 3/19 FDSA-6500-19-1 2-Jun 12/19 Page 3
Service Information Letter
PLATFORM OBSOLETE CPN REPLACEMENT CP N Cessna CJ3 810-0234-2C0001 810-0234-2C0002 810-0234-2C0102 Challenger CL- 604 810-0234-4B0001 810-0234-4B0101
(2) For APCT -3700 , ICIT -3700, and KIT -3700 software part numbers, refer to aircraft platform specific information in Section F .
D. Supplemental Type Certificate (STC) and Service Bulletin (SB) Availability Notification will be sent to operators once the STCs and SBs are available. In the interim, contact the R ockwell Collins Customer Support Center to obtain status on the STC and/or SB specific to each aircraft platform.
Rockwell Collins Avionics Support Center
319.295.5000 AvionicsSupport@Collins.com E. Software Download Instructions
(1) T extron King Air C90, B200 and B300.
This sectio n applies to T extron King Air Production delivered aircraft with Pro Line Fusion® and King Air Pro Line 21 to Pro Line Fusion ® retrofit aircraft modified by Rockwell Collins STCs SA01769WI, SA01784WI, SA01792WI, and SA01857WI.
• Both FDSA-6500 and Integrated Modular Avionics (IMA) Configuration Index T able (ICIT)-3700 software files will be available on the T extron portal (Refer to the foll owing instructions to download onto a Universal Serial Bus (USB)).
Along with the required FDSA-6500 and ICIT -3700 software, a copy of the Certificate of Conformance (CoC) and/or Airworthiness Approval T ag (8130-3) will be ava ilable for each part number to support your installation.
Jun 3/19 FDSA-6500-19-1 2-Jun 12/19 Page 4
Service Information Letter
• For both T extron Production delivered and retrofit King Air aircraft with Pro Line Fusion® refer to Rockwell Collins Approved Model List (AML) STC SA01922WI document number RCA-3158, Modification Instructions, refer to T able 1 to reference existing/new FDSA-6500 and ICIT part numbers.
• Additionally , T extron Production delivered aircraft with Pro Line Fusion ® may refer to T extron SB MTB-34-02 for existing/replacement loadset.
• The new FDSA-6500 and ICIT -3700 software may be obtained by accessing the T extron portal at http://txtavsupport.com and following the instructions.
1. Log on to your customer account at http://txtavsupport.com.
2. Once logged i n, select the applicable King Air model on the left side of the page.
3. Under "Avionics", select the link "Rockwell Collins Pro Line Fusion ® Support".
4. Use the pull down menus to find your model and serial number.
5. Refer to Section F . for USB preparation and software load reference instructions.
NOTE: Additional instructions can be obtained in the following manuals.
PUBLICATION TITLE P ART NUMBER Pro Line Fusion ® for King Air Aircraft Maintenance Manual 523-0824677 Pro Line Fus ion® for Aftermarket Installation Manual 523-0821905 B300 Aircraft Maintenance Manual 434-590169-0009 Rev B1 C90GTi Aircraft Maintenance Manual 434-590171-0009 Rev A3 B200GT Air craft Maintenance Manual 434-590168-0009 Rev B0
(2) Cessna CJ3 .
This section applies to all CJ3 aircraft updated via STC SA11219SC. The new FDSA-6500 and APCT -3700, software files may be obtained as described below.
Refer to Table 1 to reference existing/new FDSA-6500 and APCT -3700 part numbers.
• Initial delivery of the files will be electronic with the delivery of the Compact Disc (CD)s to f ollow approximately 2-3 weeks later. No Purchase Order (PO) will be required to obtain the CDs.
• Updated software will be made available on the Rockwell Collins Aftermarket web portal fo r download onto a USB memory device.
• Rockwell Collins Customer Support Engineers will reach out to each operator to ensure access to the web portal and walk them through the update.
• Refer to S ection F . for USB preparation and software load reference instructions.
Jun 3/19 FDSA-6500-19-1 2-Jun 12/19 Page 5
Service Information Letter
(3) Pro Line II to Pro Line Fusion ® Retrofit King Air.
This section ap plies to all Pro Line II King Air B200 and B300 aircraft that were updated via STC SA11136SC. The new FDSA-6500 and KIT -3700, software files may be obtained as described below. Refer to T able 1 to reference existing/new FDSA-6500 and ICIT part numbers.
• Initial delivery of the files will be electronic with the delivery of the CDs to follow approximately 2-3 weeks later. No Purchase Order (PO) will be required to obtain the CDs.
• Updated software will be made available on the Rockwell Collins Aftermarket web portal for do wnload onto a USB memory device.
• Operators should download and refer to the document titled "Pro Line II to Fusion® King Air ICIT and Audio Storage & Playback Unit (ASPU) Software Config Matrix.pdf", available on the web portal, to determine the specific files to be downloaded from the web portal for their aircraft. Please note that the KIT -3700 CD will contain all possible files, not just those for a specific aircraft.
• Rockwell Co llins Customer Support Engineers will reach out to each operator to ensure access to the web portal and walk them through the update.
• Refer to Section F . for USB preparation and software load reference instructions.
(4) Challenger 604.
This section applies to all Challenger 604 aircraft that have been updated via ST04356CH. The new FDSA-6500 and ICIT -3700 software may be obtained as described b elow. Refer to T able 1 to reference existing/new FDSA-6500 and ICIT part numbers.
• Operators should contact Nextant to obtain the aircraft service bulletin and have a USB memory device shipped to them. The USB memory device is a Parts Manufacturer Approval (PMA) approved part that is required in order to update the software o n the aircraft. The USB memory device has the same Part Number as the ICIT -3700 contained within it, which is NT0016-ICIT -0100-B. This device contains the software needed to update a Challenger 604 to resolve the TCAS Fly-T o Cue indication on the primary flight deck displays.
• The instructions for installation on the aircraft are available in the aircraft service bulletin SB-31-2019-02.
• Operator s should call Nextant Customer Support at 216.797.8416 to have the USB memory device mailed to them and to obtain instructions on how to download the aircraft service bulletin.
• Refer to S ection F . for software load reference instructions.
Jun 3/19 FDSA-6500-19-1 2-Jun 12/19 Page 6
Service Information Letter sockwel collins F. Software Installation Instructions Prepare USB and install software as follows:
• Identify the ICIT installed on the aircraft in the System Configuration.
NOTE: For CJ3 operators use APCT-3700 in place of ICIT.
(1) Access OMS.
(2) On the Maint page, select the Basic (Bsc)/Advanced (Adv) mode icon until the Adv icon is highlighted.
(3) Select the System tab d.
(4) On the IMA System Configuration page Configuration Index Nameplate area will show the electronic nameplate of the IMA Configuration Index Table (ICIT). Refer to Figure 1.
Adv Maint ACH System Report Mode IMA Sys Sys Params APM Options APH 3rd Party r Configuration Index Nameplate ICIT_V3_3_4 Formal System Test - V3.3.4 AFDR_06 DMF 2017-06-05 Rockwell Collins, Inc. Cedar Rapids, IA 52498 US IMA System - Type Number Position Status AFD-3700 LEFT Pass AFD-3700 RIGHT Pass AFD-3700 CENTER Pass TPR5601_01 IMA System Configuration Page Figure 1
(5) Refer to Table 1 to determine new ICIT and FDSA 6500.
Jun 3/19 FDSA-6500-19-1 2-Jun 12/19 Page 7
Service Information Letter
(6) T ransfer the applicable software listed in T able 1 to a USB Flash drive.
(a) Format the USB M emory flash drive as follows:
1. Insert the target USB flash drive into a free USB port in the PC.
2. Open Windows F ile Explorer and select the USB drive.
3. Right mouse click and select the Format menu option.
4. Make sure FA T32 (Default) shows in the File system drop down menu. In the Allocation un it size drop down menu, select Default allocation size. Use of the Volume label field and Format options field is not required. Select Start.
(b) The USB flash drive is formatted.
(7) Install softw are identified in T able 1 per applicable AMM/ASM - The following steps are provided for clarification/simplification only .
(a) Prepare/Load USB flash drive with required software
(b) Set the Data L oad Enable switch to ON.
(c) Enable the Automated Field Load.
1. Production K ing Air and PL21 to KA Fusion, insert field loadable shorting plug in the back of the center pedestal.
2. Aftermarket PL 2 to KA Fusion, locate the Automated Field Load enable switch in the Pilots side nose avionics bay set the switch to ON.
3. CJ3 locate the Automated Field Load enable switch in the Pilots side nose avionics bay set the switch to ON.
4. CL604, loca te the Automated Field Load enable switch behind the Pilots s e a t ,s e tt h es w i t c ht oO N .
(d) Cycle the power on the AFD-3700 unit requiring field load (all three (3)).
(e) Insert the p repared USB flash drive into the AFD front bezel USB port.
(f) The T arget Status messages will update during field load to indicate progress.
(g) Upon successful field load completion the T arget Status will state Complete for each targe t.
(h) Remove the USB flash drive from the AFD front bezel USB port
(i) Using the reversionary switch for the display being loaded, power off the display .
(j) Set the Dat a Load Enable switch to OFF .
Jun 3/19 FDSA-6500-19-1 2-Jun 12/19 Page 8
Service Information Letter
(k) Using the reversionary switch for the d isplay being loaded, power on the display .
(l) Wait one (1) mi nute for the display to draw in the configuration data from the Aircraft Personality Module.
(m) As the display powers up (after the splash screen), watch the center of the FDSA-6500-19-1 Page 8 display for the copyright statement. The third line will be the configuration the display is set for. For example, King Air B300, CL604, etc.
(n) Repeat Steps F .(7)(j) thru F .(7)(m) if third line is not displayed.
(o) Repeat Step F .(7)(b) through Step F .(7)(n) to field load the remaining AFD-3700 units.
(p) Disable the Automated Field Load.
(8) Software ver ification Repeat Steps F .(6)(a) thru F .(7)(d) and verify new ICIT was loaded Table 1 – Software to Install to determine your existing/new FDSA-6500 and ICIT-3700 part numbers.
ICIT P ART NUMBER
INST ALLED PRIOR TO
AIRCRAFT MOD
TYPE NUMBER TO INSTALL
PA RT N U M B E R S TO
INSTALL ICIT RCA-5429-100 or 434-310011-0013 434-310011-0001 or RCA-5177-001 or RCA-5168-001 or RCA-5205-001 FDSA-6500 810-0234- 1H0101 ICIT RCA-5429-101 or 101-3303-0013101-3303-0009 FDSA-6500 810-0234-1H0101 ICIT RCA-5429-102 or 434-310011-0015434-310011-0003 FDSA-6500 810-0234-1H0101 ICIT RCA-5429-200 or 434-310011-0017 434-310011-0005 or RCA-5177-002 or RCA-5168-002 or RCA-5205-002 FDSA-6500 810-0234-1H0102 ICIT RCA-5429-201 or 101-3303-0021 T extron King Air C90, B200 and B300 101-3306-0009 FDSA-6500 810-0234-1H0102 Jun 3/19 FDSA-6500-19-1 2-Jun 12/19 Page 9
Service Information Letter
ICIT P ART NUMBE R
INSTALLED PRIOR TO
AIRCRAFT MOD
TYPE NUMBER TO INSTALL
PA RT N U M B E R S TO
INSTALL ICIT RCA-5429-300 or 101-3303-0023 or 434-310011-0019 101-3306-0015 or 434-310011-0009 or RCA-5265-001 FDSA-6500 810-0234-1H 0103 ICIT RCA-5429-301 or 130-310003-0003 130-310003-0001 or 434-310011-0011 or RCA-5265-002 FDSA-6500 810-0234-1 H0103 ICIT RCA-5429-302 or 130-310002-0003 T extron King Air C90, B200 and B300 Continued 130-310002-0001 FDSA-6500 810-0234-1 H0103 APCT -3700 810-0422-602 Cessna CJ3 810-0422-600 or 810-0422-601 FDSA-6500 810-0234-2C0102 ICIT 810-0548- 2H0002 810-0548-2H0001 FDSA-6500 810-0234-2H0101 ICIT 810-0548-2H0103 810-0548-2H0101 FDSA-6500 810-0234-2H0101 ICIT 810-0548-2H0104 P r oL i n eI It oP r oL i n eF u s i o n® Retrofit King Air 810-0548-2H0102 FDSA-6500 810-0234-2H0101 ICIT NT0016-I CIT -0100-B Challenger 604 NT0016-ICIT -0100-A FDSA-6500 810-0234-4B0101 Jun 3/19 FDSA-6500-19-1 2-Jun 12/19 Page 10