Copy · U.S. DOT/FAA - Service Information · 34 pages

© Rolls-Royce plc. Filed by the FAA in regulations.gov docket FAA-2009-0162; AD 2011-18-21 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextOCR

This text is OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '3a61a5767f7da0b606605b8b03d1f5972572fbab36ce33c9420dfe650397b6ba'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

Jan. 16/98 RB211-524 SERIES PROPULSION SYSTEM SERVICE BULLETIN This document transmits Revision 3 to Service Bulletin RB211-72-9764, Revision 1 to the Supplement, and the Modification Acceptance Sheet.

Service Bulletin Revision Status Supplement Revision Status Initial Issue Aug. 20/93 Initial Issue Aug.20/93 Revision 1 Aug. 25/95 Revision 2 Nov. 10/95 Bulletin Revision 3 Remove Incorporate Reason for Change Pages 1, 3, 4, rages 1, 3, 4, To change the compliance category 6 and 11 6 and 11 dated Jan. 16/98 Supplement Revision 1 Remove Incorporate Reason for Change Page 1 Page 1 To update prices NOTE: Additional work IS NOT required on engines modified to previous issues of this Service Bulletin RB.211-72-9764 Transmittal Page 1 of 2

Page 2OCROpen in PDF

LIST OF EFFECTIVE PAGES The effective pages to this Service Bulletin following the incorporation of R Revision 3 and Revision 1 to the Supplement are as follows:

Rev.

Page No . Date Bulletin R 1 3 Jan. 16/98 2 Aug. 20/93 R 3 3 Jan. 16/98 R 4 3 Jan. 16/98 . 5 1 Aug. 25/95 R 6 Jan. 16/98 7 Aug. 20/93 8 Aug. 20/93 Aug. 20/93 10 Aug. 20/93 R 11 3 Jan. 16/98 12 Aug. 20/93 13 Aug. 20/93 14 Aug. 20/93 15 Aug. 20/93 16 Aug. 20/93 17 Aug. 20/93 18 Aug. 20/93 19 Aug. 20/93 20 Aug. 20/93 21 Aug. 20/93 22 Aug. 20/93 23 Aug. 20/93 24 Aug. 20/93 25 Aug. 20/93 26 Aug. 20/93 27 Aug. 20/93 28 Aug. 20/93 29 Aug. 20/93 30 Aug. 20/93 Supplement R 1 1 Jan. 16/98 RB.211-72-9764 Transmittal Page 2

Page 3OCROpen in PDF

RB.211 Propulsion System

SERVICE BULLETIN ENGINE - COMBUSTION SECTION - IMPROVED PHASE 2 COMBUSTION LINER WITH de00043516c 1. Planning Information STRENGTHENED HEAD AND IMPROVED HEATSHIELDS - MOD. 72-9764 A. Effectivity Printed in Great Britain (1) Lockheed L-1011 RB211-524B4-02, -524B4-02/10, -524B4-02/11, -524B4-D-02, -524B4-D-02/10, -524B4-D-02/11 Engines prior to Serial No.14883 RB211-524 Modules -M04503AE, -M04503AF, -M04503AG, -M04503АH, -M04503AL, -M04503AM, -M04578AB, -M04578AD, -M04579AB, -M04579AD, -M04586AA, -M04586AB, -M04589AA, -M04589AB, -M04708AB, -M04709AB, -M04719AA, -MO4723AA, -MO4723AB, -M04724AA, -M04724AB, -M04725AA, -M04726AA, -M04727AA, -M04727AB, -M04728AA prior to Serial No. CM5607

(2) Boeing 747 RB211-524D4-19, -524D4-19/11, -524D4-19/12, -524D4-19/15, -524D4-19/17, -524D4-19/18, -524D4-19/19, -524D4-19/21, -524D4-19/22, -524D4X-19, -524D4X-19/11, -524D4X-19/12, -524D4X-19/15, -524D4X-19/17, -524D4X-19/18, -524D4X-19/19, -524D4X-19/21, -524D4X-19/22 Engines prior to Serial No. 12790 RB211-524 Modules -M04700AA, -M04701AA, -M04702AA, -M04702AB, -M04703AA,. -M04703AB prior to Serial No.CM7806 RB211-524D4-B-19, -524D4-B-19/11, -524D4-B-19/12, -524D4-B-19/15, -524D4-B-19/17, -524D4-B-19/18, -524D4-B-19/19, -524D4-B-19/21, -524D4-B-19/22, -524D4X-B-19, -524D4X-B-19/11, -524D4X-B-19/12, -524D4X-B-19/15, -524D4X-B-19/17, -524D4X-B-19/18, -524D4X-B-19/19, -524D4X-B-19/21, -524D4X-B-19/22 Engines prior to Serial No.12790 RB211-524 Modules -M04710AA, -M04710AB, -M04711AA, -M04712AA, -M04713AA, -M04713AB prior to Serial No.CM7806 RB211-524D4-39, -524D4-B-39 Engines prior to Serial No.12561 RB211-524 Modules -M04704AA, -M04704AB, -M04705AA, -M04705AB, -M04714AA, -M04714AB, -M04715AA, -M04715AB prior to Serial No. CM3961 RB211-524G2-19, -524G2-19/11, -524G2-19/15, -524G3-19, -524G3-19/15, -524H2-19, -524H2-19/11, -524H2-19/15 Engines prior to Serial No. 13343 RB211-524 Modules -M04731AA, -M04732AA prior to Serial No.CM8367 Aug. 20/93 RB.211-72-9764 © Rolls-Royce pic R Revision 3 Jan. 16/98 Page 1 of 30

Page 4OCROpen in PDF

RB.211 Propulsion System

OYCE SERVICE BULLETIN

(3) Boeing 767 RB211-524H-36, -524H-36/11 Engines prior to Serial No. 13452 RB211-524 Modules -M04731AA, -M04732AA prior to Serial No.CM8454 B. Reason

(1) Problem Cracking of the front combustion liner diffuser case bleed struts and front section inner and outer liners may occur after extended use. Printed in Great Britain Additionally, Phase 2 combustion liners have exhibited burning/holing of the heatshield inner ramp corners which may cause premature removal.

(2) Evidence There have been a few reported incidents of combustor head rejection due to cracking with the Phase 2 combustion liner. In addition there have been several incidents with the Improved Package l combustion liner which has the same basic head assembly. The cracking can result in loss of material which in a small number of cases has led to downstream secondary distress.

(3) Substantiation The changes introduced by this Service Bulletin have completed over 1,000 cycles of development engine testing at temperature conditions representative of those likely to be encountered by engines in service after which the combustor was found to be in good condition.

Engineering analysis confirms a reduction in stresses in the affected area when a strengthened head is fitted and the problem is alleviated.

(4) Objective Incorporation of the changes introduced by this Service Bulletin (Modification) is designed to maintain reliability. It is anticipated that a significant increase in combustor head and heatshield life will result upon incorporation of this Service Bulletin (Modification).

(5) Effect of Service Bulletin on:

Operation Not affected Maintenance Not affected Overhaul Not affected Repair Schemes Affected (see 1.K.)

Interchangeability Not affected Aug. 20/93 © Rolls-Royce pic RB.211-72-9764 Page 2

Page 5OCROpen in PDF

ROLLS BB.2211 Propulsion System

OYCE SERVICE BULLETIN C. Description

(1) The changes introduced by this Service Bulletin are as follows:

de00043516c A revised front combustion liner assembly is introduced similar to the existing item except for the following:

(a) The combustion liner head with diffuser, diffuser walls and bleed offtake struts is produced in C263 material instead of N75 material.

(b) Reduced axial length bleed offtake struts with increased leading edge Printed in Great Britain (c) A revised heatshield design featuring a modified cooling hole pattern radius.

and aluminised surface finish.

(₫) The meter panel cooling hole pattern is revised to match the revised heatshield and ensure sufficient cooling air flow.

(e) The revised meter panel features an increased cooling flow burner seal ring.

(2) Existing front combustion liner assemblies can be reworked, see Fig 1 to

5.

(3) A combustion liner, head section assembly is required to accomplish rework of the front combustion liner.

(4) For relationship with other Service Bulletins (Modification) see 1.J.

D. Compliance R RB211-524H-36 series engines and modules

R MANDATORY R This Service Bulletin (Modification) is classified MANDATORY by the United R Kingdom Civil Aviation Authority (C.A.A.) and must be accomplished by 10th R December, 1997.

R RB211-524-B4-02, D4-19, D4-B-19, D4-39, D4-B-39, -524-G2-19, G3-19, H2-19 series engines and modules RECOMMENDED (3) Rolls-Royce recommends that this Service Bulletin (Modification) be accomplished, commensurate with Operators experience, when the part involved requires renewal because of its condition.

Aug. 20/93 RB.211-72-9764 Revision 3 Jan, 16/98 © Rolls-Royce pic Page 3

Page 6OCROpen in PDF

RB.211 Propulsion System

OYCE SERVICE BULLETIN E. Approval Modification 72-9764 was approved by a representative of the United Kingdom Civil Aviation Authority (C.A.A.) on June 3/93.

R Rolls-Royce plc Aerospace Group is approved under the authority of J.A.A.

R Design Organisation Approval No.CAA.JA.2001.

F. Manpower Estimated manhours:

(1) In service Not applicable Printed in Great Britain

(2) At overhaul 20 hours NOTE: The parts affected by this Service Bulletin are accessible at overhaul.

G. Material - Price and Availability Modification kit not required; parts supplied as single line items.

For prices and availability of future spares, see supplement to this bulletin.

H. Tooling - Price and Availability For prices and availability, see supplement to this bulletin.

Usage Part No. Description A.M.O. Function Additional tools MH13402 Location Ring Locate combustion liner head section and inner wall whilst tack welding MH13403/2 Argon Backing Block * Supply argon backing whilst welding replacement combustion liner head section to combusion liner inner wall MH13406/1 Argon Backing Block * Supply argon backing whilst welding replacement combustion liner head section to combusion liner outer wall Revision 3 Jan. 16/98 Aug. 20/93 © Rolls-Royce pic RB.211-72-9764 Page 4

Page 7OCROpen in PDF

RB. 211 Propulsion System ROYCE • SERVICE BULLETIN Usage Part No. Description A.M.O. Function de00043516c MH13432/2 Location Clamp Ring * (inner wall) wall whilst tack welding to Locate combustion liner inner replacement combustion liner head section. Locate during post weld inspection MH13434 Check Gauge (inner * Post weld inspect position of Printed in Great Britain wall) inner wall MH13775/2 Location Clamp Ring * Locate combustion liner outer (inner wall) wall whilst tack welding to replacement combustion liner head section. Locate during post weld inspection MH13814 Check Gauge (outer Post weld inspect position of wall) outer wall MH15786/1 Checking and Welding * Hold combustion liner component fixture parts and tooling components during tack welding and post weld inspection HC22892 Insert tool * Insert wire thread insert 3405528 Tang Removal Tool * Remove tang from fitted wire thread insert HCU5037 Thread Gauge * Inspect fitted wire thread insert threads HC21740 Torque Check Plug Check fitted wire thread insert torque HC21743 Torque Adapter * Check fitted wire thread insert torque 1704302 Torquemaster * Check fitted wire thread insert torque 'A' - accomplishement Usage column abbreviations 'M' - maintenance '0' - overhaul R Revision 1 Aug.25/95 Aug. 20/93 © Rolls-Royce pic RB.211-72-9764 Page 5

Page 8OCROpen in PDF

RB.211 Propulsion System OYCE ® SERVICE BULLETIN I. Weight and Balance

(1) Weight change Plus 1,18 kg. (2.6 1b.)

(2) Moment Arm 1245 mm. (49,0in.) rearwards

(3) Datum Engine front mount centreline J. References

(1) All engines This Service Bulletin supersedes the following Rolls-Royce RB2ll Service Printed in Great Britain Bulletins:

72-8980 Combustion section - Front combustion liner - (Hairpin standard) stiffened cabin air offtake struts 72-9122 Combustion liners - Front combustion liner assembly with the P4 air transfer pillar bosses in revised material

(2) All engines except RB211-524G2-19, -524G3-19, -524H2-19 and -524H-36 This Service Bulletin only applies to engines incorporating the following Rolls-Royce RB2l1 Service Bulletin:

72-8729 Combustion liners - Improved front combustion liner assembly - Seventh section outer cooling ring with slotted holes.

(3) Engine Manual, 72-41-00, Disassembly/Assembly and 72-41-13, Removal/Instllation Engine Overhaul Processes Manual, T.S.D.594-J, TASK 70-00-00-100-101, 70-00-00-200-210, 70-00-00-200-213 and 70-00-00-300-409 K. Other Publications Affected

(1) Illustrated Parts Catalogue, 72-41-13

(2) The following Repair Schemes will be revised to include the new parts introduced by this Service Bulletin:

Engine Manual, 72-41-13, FRS2519, 3002, 5596 Aug. 20/93 Revision 3 Jan. 16/98 © Rolls-Royce pic RB.211-72-9764 Page 6

Page 9OCROpen in PDF

ROLLS RB. 211 Propulsion System ROYCE o SERVICE BULLETIN

2. Accomplishment Instructions A. The new front combustion liner assemblies introduced by this Service Bulletin are freely and fully interchangeable with existing. Remove and install in accordance with current overhaul procedure (Engine Manual, 72-41-00, Disassembly/Assembly and 72-41-13, Removal/Installation) B. Rework existing front combustion liner assembly (UL27659, UL23992 and UL22988) (72-41-13 Fig/Item No.02250) Britain Consumable Materials in Oreat OMat 508 Polishing buff, hard felt OMat 3/62 Welding filler wire, nickel C263 inted Procedure Supplementary Information

(1) Machine to separate liner head assembly from inner and outer walls Refer to Fig. l and 2.

Pack under front lip as required and clamp to machine table. Cut into head section leaving a trim allowance on inner and outer walls.

Discard head assembly.

Use vertical lathe

(2) Machine inner and outer walls Refer to Fig.l and 2.

to length as required for Use vertical lathe re-fitment

(3) Deburr

(4) Remove thermal barrier coating fron areas adjacent to weld line on inner and outer walls

(5) Select replacement combustion liner head section assembly

(6) Clean weld edges of liner walls and head section assembly Refer to Fig. l and 2 and Engine Manual TASK 72-41-13-300-094, Repair Scheme FRS5596.

Do not thin parent material below 0,98 mm. (0.039in.).

Use portable grinding equipment Refer to Fig.3 and Material Information.

rarts:

UL36797 - Combustion liner head section assembly Refer to Fig.2 OMat 508, Polishing buff Aug. 20/93 RB.211-72-9764 Page 7 © Rolls-Royce pic

Page 10OCROpen in PDF

ROLLS RB 211 Propulsion System COrED ® SERVICE BULLETIN Procedure Supplemantary Information

(7) Locally degrease all weld edges

(8) Assemble replacement head section assembly and inner and outer liner walls into welding fixture Engine Overhaul Processes Manual I.S.D. 594-J, IASK 70-00-00-100-101 Refer to Fig.l, 2, 3 and 4.

Ensure correct radial and axial position Tools:

MH13432/2 Location Clamp ring Printed in Great Britain (inner wall) MH13775/2 Location Clamp ring MH14786/1 Checking and welding fixture MH13402 Location ring

(9) Argonarc tackweld around circumference of combustion liner head assembly and inner and outer wall joints Refer to Fig. l and 3.

Engine Overhaul Processes Manual I.S.D. 594-J, IASK 70-00-00-300-409.

Tackweld through location ring slots Group 2 welds 12,7 mm. (0.500in.)

long Tools:

MH13406/1 Outer wall argon backing block MH13403/2 Inner wall argon backing block Welding Data Type of Welding Argonarc D.C. output Weld Group Group 2 Filler Material OMat 3/62 Filler wire, nickel C263 Torch BOC 200 or any 200 amp water cooled equivalent Electrode 2 per cent thoriated tungsten

2.37 mm. (0.093in.) dia.

Current 20 - 25 amps Gas Flow 25 CFH for torch 15 CFH for backing Polarity Negative The data is given for guidance only. Optimum settings must be obtained by trials.

Aug. 20/93 RB.211-72-9764 Page 8 © Rolls -Royce pic

Page 11OCROpen in PDF

ROLLS RB 211 Propulsion System cHOrE ® SERVICE BULLETIN Procedure Supplemantary Information

(10) Remove tackwelded assembly from fixture

(11) Planish joints at inner and outer positions to produce good butt joints

(12) Argonarc weld complete inner and Printed in Great Britain outer circumferential joints Refer to Fig.l and 3.

Refer to Engine Overhaul Processes Manual T.S.D.594-J, TASK 70-00-00-300-409 and Welding Data in operation 2.B. (9) OMat 3/62 Welding filler wire, nickel C263 Tools:

MH13406/1 Outer wall argon backing block MH13403/2 Inner wall argon backing block

(13) Fluorescent penetrant inspect Engine Overhaul Processes Manual, welded areas I.S.D.594-J, TASK 70-00-00-200-210 or TASK 70-00-00-200-213. Reject if cracked

(14) Inspect welds Engine Overhaul Processes Manual, I.S.D.594-J, IASK 70-00-00-300-409, Fig. 70-00-00-990-409-003, 004, 005, A06 and B06 butt welded acceptance standards. Group 2 welds

(15) Dress excess weld bead flush Maximum height of weld bead after to parent material dressing to be 0,25 mm. (0.010in.).

Parent material must not be reduced.

Use portable grinding equipment Aug. 20/93 RB.211-72-9764 Page 9 © Rolls •Royce pic

Page 12OCROpen in PDF

ROLLS RB.211 Propulsion System more ® SERVICE BULLETIN Procedure Supplemantary Information

(16) Dimensionally inspect Refer to Fig.l, 3 and 4 and Engine Manual TASK 72-41-13-300-095, Repair Scheme FRS2519 - Basic Repair Data.

Locate in check/weld fixture and inspect liner wall positions Tools:

MH14786/1 Checking and welding Printed in Great Britain fixture MH13432/2 Location clamp ring (inner wall) MH13775/2 Location calmp ring (outer wall) MH13434 Check gauge (inner wall) MH13814 Check gauge (outer wall)

(17) Re-apply thermal barrier coating to areas of weld joints and apply to designated areas in head assembly

(18) Select wire thread inserts Refer to Fig.l and 3 and Engine Manual TASK 72-41-13-300-094, Repair Scheme FRS5596 Refer to Fig. 5 and Material Information Parts:

AGS3707 Wire thread insert

(19) Fit wire thread inserts Refer to Fig.5 and Standard Practices Manual TASK 70-42-13-300-001, Repair Scheme FRS3002.

Fit wire thread inserts AGS3707, nominal unified thread size 6,35 mm.

(0.250in.) dia - 28 threads per inch Tools:

HC22892 Insert tool 3405528 Tang removal tool HCU5037 Thread gauge

(20) Check torque of inserts Tools:

HC21740 Torque check plug HC21743 Torque adapter 1704302 Torquemaster Aug. 20/93 RB.211-72-9764 Page 10 © Rolls -Royce pic

Pages 13–24 of 34