TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '036882dcc4c539de5afdb79379a0c7d957c7d17550194bdc3f88e78f6c43f335' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '036882dcc4c539de5afdb79379a0c7d957c7d17550194bdc3f88e78f6c43f335' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
P.O. Box 31, DERBY This Rolls-Royce Technical Publication is subject to export control as follows: ® DE24 8BJ, UK Jurisdiction: UK ROLLS Telephone: 44 (0) 1332 242424 Export Classification: PL9009.c Fax: 44 (0) 1332 249936 ROYCE
PUBLICATION TRANSMITTAL The technical information contained in this document has been approved under the authority of - See Planning Information, Approval.
Date Jul .26/18 TRENT 1000 SERIES PROPULSION SYSTEMS NON-MODIFICATION SERVICE BULLETIN ALERT Printed in Great Britain This document transmits Revision 2 to Service Bulletin TRENT1000-72-AK130 Document History Service Bulletin Revision Status Supplement Revision Status Initial Issue Jun- 11/18 Revision 1 Jun. 29/18 Bulletin Revision 2 Remove Incorporate Reason for change Pages 1 to 8 of the Pages 1 to 12 of the To amend Compliance and Service Bulletin Service Bulletin update and delete Appendix 1 change tables 1 and 2.
All pages of To amend Compliance and Appendix 1 update and delete Appendix 1 change tables 1 and 2.
ALERT TRENT 1000 72-AK130 Transmittal - Page 1 of 2
CHECK THAT ALL PREVIOUS TRANSMITTALS HAVE BEEN INCORPORATED If any have not been received please advise Customer Data Services, Rolls-Royce pic, Derby, England © Rolls-Royce plc (date as above) Printed in Great Britain
LIST OF EFFECTIVE PAGES The effective pages to this Service Bulletin following incorporation of Revision 2 are as follows:
Page Revision Number Revision Date Bulletin R 1 2 Jul.26/18 R 2 2 Jul.26/18 R 3 2 Jul.26/18 R 4 2 Jul.26/18 R 5 2 Jul.26/18 R 6 2 Jul.26/18 R 7 2 Jul.26/18 R 8 2 Jul.26/18 R 9 2 Jul.26/18 R 10 2 Jul.26/18 R 11 2 Jul.26/18 R 12 2 Jul.26/18 Printed in Great Britain TRENT 1000 72−AK130 Transmittal - Page 2
1. Planning Information A. Effectivity Boeing 787 TRENT1000-A/01 All Engines TRENT1000-A/01A All Engines TRENT1000-AE All Engines TRENT1000-AE/01A All Engines TRENT1000-C/01 All Engines TRENT1000-C/01A All Engines TRENT1000-CE All Engines TRENT1000-CE/01A All Engines TRENT1000-D/01 All Engines TRENT1000-D/01A All Engines TRENT1000-E/01 All Engines TRENT1000-E/01A All Engines TRENT1000-G/01 All Engines TRENT1000-G/01A All Engines TRENT1000-H/01 All Engines TRENT1000-H/01A All Engines B. Reason Problem It has been identified that some Intermediate Pressure Compressor (IPC) stage 1 rotor blades (FW61601, KH16052), IPC stage 2 rotor blades (FW61602, KH16053) are cracking in-service on the Trent 1000 Pack B engines. These cracks could propagate and have the potential to lead to in-flight events.
ENGINE - IP COMPRESSOR STAGE 1 BLADES, STAGE 2 BLADES AND IPC SHAFT STAGE 2
DOVETAIL POSTS - INSPECTION INTERVAL DEFINITION - NON-MODIFICATION SERVICE BULLETIN
- NON - MOD.72-AK130 Printed in Great Britain TRENT 1000 72−AK130 Page 1 of 12 Jun.11/18 Jul.26/18R TRENT 1000 SERIES
SERVICE BULLETIN
C. Description This Non-Modification Service Bulletin (NMSB) defines the initial and repeat inspections intervals R R for the Trent 1000 Pack B IPC stages 1 and 2 blades (Front and rear faces) and IPC shaft stage 2 dovetail posts. At the given interval (if previously found uncracked)R this NMSB instructs the accomplishment of NMSB 72-K099 on IPC stage 1 blades, and NMSBR 72-K100 to be performed on IPC stage 2 blades (Front face) and IPC shaft stage 2 dovetail posts and NMSBR 72-K129 to be performed on IPC stage 2 blades (Rear Face).
Revision 1 of this NMSB confirmedR the applicable airworthiness directive number, also updatedR Appendix 1 group 1 and 2 lists and introduced exclusions to Compliance D.(2).(a), and D.(3).(a) for stage 2 (Front and Rear) inspections. Tables 3 and 4 added to Appendix 1.
Revision 2 of this NMSB instructs initial and repeat inspection intervals for IPC stage 1 blade (Front face), stage 2 blade (Front and Rear face) and IPC shaft stage 2 dovetail posts to the Compliance section and Tables 1 and 2.
These supersede the once around the fleet inspections that were defined in earlier issues of this NMSB.
R R R R R D. Compliance This Non-Modification Service Bulletin is the subject of EASA Airworthiness Directive 2018-0128R1 and will be superseded by a new Airworthiness Directive.R
(1) Part A - IPC Stage 1 Blade
(a) ON-WING ALERT Perform IPC stage 1 blade (Front Face) inspection in accordance with the accomplishment instruction in Section 3.A.1 of this NMSB and the inspection thresholds and the repeat inspection intervals shown in Table 1.
R R R R Where engine/IPC modules previously inspected in accordance with earlier issues of this NMSB or equivalent were found uncracked, and have on the date of issue of revision 2 of this NMSB accumulated more than an additional 400 cycles, these engines/IPC modules should be inspected within 30 days from the date of issue of revision 2 of this NMSB. If uncracked, continue at the repeat inspection as shown in Table 1.
R R R R R R R Printed in Great Britain TRENT 1000 72−AK130 Page 2 Jun.11/18 Jul.26/18R TRENT 1000 SERIES
SERVICE BULLETIN
Where engines/IPC modules previously inspected in accordance with earlier issues of this NMSB or equivalent were found uncracked, and have on the date of issue of revision 2 of this NMSB accumulated between 200 and 400 additional cycles, these engines/IPC modules should be inspected within 60 days from the date of issue of revision 2 of this NMSB. If uncracked, continue at the repeat inspection as shown in Table 1.
R R R R R R R Where engines/IPC modules previously inspected in accordance with earlier issues of this NMSB or equivalent were found uncracked, and have on the date of issue of revision 2 of this NMSB accumulated no more 200 additional cycles, these engines/IPC modules should be inspected at the next applicable interval as shown in Table 1 or within 60 days from the date of issue of revision 2 of this NMSB, whichever is later. If uncracked, continue at the repeat inspection as shown in Table 1.
R R R R R R R R For engines/IPC modules (defined as Grou p2-6 0d a y compliance time in earlier issues of this NMSB) which have not been inspected by the date of issue of revision 2 of this NMSB, these should be inspected no later than 10th August 2018. If uncracked continue inspections at the repeat interval defined in Table 1.
R R R R R
(b) IN-SHOP
OPTIONALR Approved Maintenance RepairR and Overhaul (MRO) facilities may embody this R R inspection on behalf of the operator during a shop visit when called out R R in the workscope, unless the inspection had been performed prior to shop induction. Inspection procedures in-shop shall be carried out in accordance with the procedures detailed in the In-Shop Accomplishment Instructions in Section 3.A.2 of this NMSB.
R R R If the engine/IPC module is above the initial inspection threshold and is subject to ongoing repeat inspections and NMSB72-K132 was not embodied during the shop visit, any applicable repeat inspection requirements for IPC stage 1 blades as defined in Table 1 of this NMSB must be recorded in the carry forward sheet.
R R R R R If an inspection was completed In-Shop, it is the responsibility of the MRO facility to report the inspection results in accordance with the instructions using the feedback form (or similar) in the applicable NMSB.
R R R R
(2) Part B - IPC Stage 2 Blade (Front Face) and IPC Shaft Stage 2 Dovetail Posts
(a) ON-WING ALERT Printed in Great Britain TRENT 1000 72−AK130 Page 3 Jun.11/18 Jul.26/18R TRENT 1000 SERIES
SERVICE BULLETIN
Perform IPC stage 2 blade (Front Face) and IPC shaft stage 2 dovetail posts inspection in accordance with the accomplishment instructions in Section 3.B.1 of this NMSB and the inspection thresholds and the repeat inspection intervals as shown in Table 2.
R R R R Where engines/IPC modules previously inspected in accordance with earlier issues of this NMSB or equivalent were found uncracked, and have on the date of issue of revision 2 of this NMSB accumulated more than an additional 200 cycles, these engines/IPC modules should be inspected within 30 days from the date of issue of revision 2 of this NMSB. If uncracked, continue at the repeat inspection as shown in Table 2.
R R R R R R R Where engines/IPC modules previously inspected in accordance with earlier issues of this NMSB or equivalent were found uncracked, and have on the date of issue of revision 2 of this NMSB accumulated between 100 and 200 additional cycles, these engines/IPC modules should be inspected within 60 days from the date of issue of revision 2 of this NMSB. If uncracked, continue at the repeat inspection as shown in Table 2.
R R R R R R R Where engines/IPC modules previously inspected in accordance with earlier issues of this NMSB or equivalent were found uncracked, and have on the date of issue of revision 2 of this NMSB accumulated no more 100 additional cycles, these engines/IPC modules should be inspected at the next applicable interval as shown in Table 2 or within 60 days from the date of issue of revision 2 of this NMSB, whichever is later. If uncracked, continue at the repeat inspection as shown in Table 2.
R R R R R R R R
(b) IN-SHOP
OPTIONALR Approved Maintenance Repair and Overhaul (MRO) facilities may embody this inspection on behalf of the operator during a shop visit when called out in the workscope, unless the inspection had been performed prior to shop induction. Inspection procedure in-shop shall be carried out in accordance with the procedures detailed in the In-Shop Accomplishment Instructions in Section 3.B.2 of this NMSB.
R R R R R R If the engine/IPC module is above the initial inspection threshold and is subject to ongoing repeat inspections and NMSB 72-K132 was not embodied during the shop visit, any applicable repeat inspection requirements for IPC stage 2 blades as defined in Table 2 of this NMSB must be recorded in the carry forward sheet.
R R R R R If an inspection was completed In-Shop, it is the responsibility of the MRO facility to report the inspection results in accordance with the instructions using the feedback form (or similar) in the applicable NMSB.
R R R R Printed in Great Britain TRENT 1000 72−AK130 Page 4 Jun.11/18 Jul.26/18R TRENT 1000 SERIES
SERVICE BULLETIN
(3) Part C - IPC Stage 2 Blades (Rear Face)
(a) ON-WING ALERT Perform IPC stage 2 blade (Rear Face) inspection in accordance with the accomplishment instructions in Section 3.C.1 of this NMSB and the inspection thresholds and the repeat inspection intervals as shown in Table 2.
R R R R Where engine/IPC modules previously inspected in accordance with earlier issues of this NMSB or equivalent were found uncracked, and have on the date of issue of revision 2 of this NMSB accumulated more than an additional 200 cycles, these engines/IPC modules should be inspected within 30 days from the date of issue of revision 2 of this NMSB. If uncracked, continue at the repeat inspection as shown in Table 2.
R R R R R R R Where engines/IPC modules previously inspected in accordance with earlier issues of this NMSB or equivalent were found uncracked, and have on the date of issue of revision 2 of this NMSB accumulated between 100 and 200 additional cycles, these engines/IPC modules should be inspected within 60 days from the date of issue of revision 2 of this NMSB. If uncracked, continue at the repeat inspection as shown in Table 2.
R R R R R R R Where engines/IPC modules previously inspected in accordance with earlier issues of this NMSB or equivalent were found uncracked, and have on the date of issue of revision 2 of this NMSB accumulated no more 100 additional cycles, these engines/IPC modules should be inspected at the next applicable interval as shown in Table 2 or within 60 days from the date of issue of revision 2 of this NMSB, whichever is later. If uncracked, continue at the repeat inspection as shown in Table 2.
R R R R R R R R
(b) IN-SHOP
OPTIONALR Approved Maintenance Repair and Overhaul (MRO) facilities may embody this inspection on behalf of the operator during a shop visit when called out in the workscope, unless the inspection had been performed prior to shop induction. Inspection procedures in-shop shall be carried out in accordance with the procedures detailed in the In-Shop Accomplishment Instructions in Section 3.C.2 of this NMSB.
R R R R R R Printed in Great Britain TRENT 1000 72−AK130 Page 5 Jun.11/18 Jul.26/18R TRENT 1000 SERIES
SERVICE BULLETIN
If the engine/IPC module is above the initial inspection threshold and is subject to ongoing repeat inspections and NMSB 72-K132 was not embodied during the shop visit, any applicable repeat inspection requirements for IPC stage 2 blades as defined in Table 2 of this NMSB must be recorded in the carry forward sheet.
R R R R R If an inspection was completed In-Shop, it is the responsibility of the MRO facility to report the inspection results in accordance with the instructions using the feedback form (or similar) in the applicable NMSB.
R R R R
(4) Part D - Operational Events Requiring ActionR
(a) ON-WINGR ALERTR Following operation in asymmetric power conditions sustained for more than 30 minutes at less than 25,000 feet altitude resulting from engine power reduction for IFSD, perform inspections in accordance with accomplishment instructions in Section 3.A, 3.B and 3.C of this NMSB on the not-affected engine (no power reduction, no IFSD) installed on the aeroplane, prior to next flight.
R R R R R R If this inspection is performed and the engine is not rejected and is not subject to a repeat inspection interval already, then this inspection is to be considered the initial inspection and repeat inspections shall continue in accordance with Table 1 and Table 2.
R R R R If this inspection is performed and the engine is not rejected and was subject to a repeat inspection interval already, then this inspection meets that requirement and subsequent repeat inspections shall continue in accordance with Table 1 and Table 2.
R R R R
(b) IN-SHOPR Not applicableR E. Approval The technical content of this Non-Modification Service Bulletin was approved under the authority of Design Organisation Approval EASA.21J.035 on Jun.08/18, Jun.29/18 R R and re-approved on Jul.26/18.
F. Manpower
(1) Time to gain access Refer to 72-K099, 72-K100 and 72-K129.
Printed in Great Britain TRENT 1000 72−AK130 Page 6 Jun.11/18 Jul.26/18R TRENT 1000 SERIES
SERVICE BULLETIN
(2) Time to inspect Refer to 72-K099, 72-K100 and 72-K129.
(3) Time to restore to serviceable condition Refer to 72-K099, 72-K100 and 72-K129.
G. Material Price and Availability Refer to 72-K099, 72-K100 and 72-K129.
H. Tooling Price and Availability Refer to 72-K099, 72-K100 and 72-K129.
I. References
(1) Rolls-Royce Non-Modification Service Bulletins:
(a) 72-K099 Engine - Ultrasonic Inspection of Trent 1000 Intermediate Pressure Compressor Rotor 1 Blades Built Up Engine - Non-Modification Service Bulletin
(b) 72-K100 Engine - Visual Borescope Inspection of Trent 1000 Intermediate Pressure Compressor Rotor 2 Blades and Intermediate Pressure Compressor Shaft Stage 2 Dovetail Posts - Non-Modification Service Bulletin
(c) 72-K129 Engine - IP Compressor Stage 2 Rotor Blade Dovetail Root (Rear) - Ultrasonic Inspection - Non-Modification Service Bulletin
(d) 72-K132R Engine Component - Replacement of the IP Compressor Rotor Stage 1 Blades and/or Stage 2 Blades and/or IPC Rotor - Non-Modification Service Bulletin R R R Printed in Great Britain TRENT 1000 72−AK130 Page 7 Jun.11/18 Jul.26/18R TRENT 1000 SERIES
SERVICE BULLETIN
2. Material Information Refer to 72-K099, 72-K100 and 72-K129.
Printed in Great Britain TRENT 1000 72−AK130 Page 8 Jun.11/18 Jul.26/18R TRENT 1000 SERIES
SERVICE BULLETIN
3. Accomplishment Instructions A. Part A - IPC Stage 1 Blades
(1) On-Wing
(a) Perform NMSB 72-K099. Refer to NMSB 72-K099, 3. Accomplishment Instructions - On-wing.
(b) Accomplishment of NMSB 72-AK130 Part A shall be recorded in accordance with local SB Tracking Procedures.
(2) In-shop
(a) Perform NMSB 72-K099, refer to NMSB 72-K099, 3.R Accomplishment Instructions - In-shop.
(b) Accomplishment of NMSB 72-AK130 Part A shall be recorded in the engine logbook and module logcard.
B. Part B - IPC Stage 2 Blades (Front face) and IPC Shaft Stage 2 Dovetail Posts
(1) On-wing
(a) Perform NMSB 72-K100. Refer to NMSB 72-K100, 3. Accomplishment Instructions - On-wing.
(b) Accomplishment of NMSB 72-AK130 Part B shall be recorded in accordance with local SB tracking system procedures.
(2) In-Shop
(a) Perform NMSB 72-K100, refer to NMSB 72-K100, 3.R Accomplishment instructions - In-Shop.
(b) Accomplishment of NMSB 72-AK130 Part B shall be recorded in the engine logbook and module logcard.
C. Part C - IPC Stage 2 Blades (Rear Face)
(1) On-wing
(a) Perform NMSB 72-K129. Refer to NMSB 72-K129, 3. Accomplishment Instructions - On-Wing.
(b) Accomplishment of NMSB 72-AK130 Part C shall be recorded in accordance with local SB tracking system procedure.
Printed in Great Britain TRENT 1000 72−AK130 Page 9 Jun.11/18 Jul.26/18R TRENT 1000 SERIES
SERVICE BULLETIN
(2) In-shop
(a) Perform NMSB 72-K129, refer to NMSB 72-K129, 3. Accomplishment Instructions - In-Shop.
(b) Accomplishment of NMSB 72-AK130 Part C shall be recorded in accordance with local SB tracking system procedure.
D. Part D - Operational Events Requiring ActionR
(1) On-wingR
(a) Comply with sections 3.A, 3.B, and 3.C.R
(b) Accomplishment of this NMSB 72-AK130 Part A, Part B, Part C and Part D shall be recorded in the engine logbook and module logcard.
R R Printed in Great Britain TRENT 1000 72−AK130 Page 10 Jun.11/18 Jul.26/18R TRENT 1000 SERIES