Text
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'f32cb35f3913822587cb7c5ea1467beb53c8865862bce956dc39b6eae16fcc9e' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'f32cb35f3913822587cb7c5ea1467beb53c8865862bce956dc39b6eae16fcc9e' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
25 July 2023 Current valid documentation see: 72-10-00 Initial Issue www.flyrotax.com Page 1 of 9 Copyright - BRP-Rotax GmbH & Co KG. All rights reserved.
d07066.fm SB-912-078 / SB-914-059 / SB-912 i-014
SERVICE BULLETIN Exchange of propeller shaft on ROTAX® Engine type 912 / 914 (Series) and 912 i (Series) ATA System: 72-10-00 Propeller gear assy.
MANDATORY
1) Planning information To obtain satisfactory results, procedures specified in this publication must be accomplished with accepted methods in accordance with prevailing legal regulations.
BRP-Rotax GmbH & Co KG cannot accept any responsibility for the quality of work performed in accomplishing the requirements of this publication.
1.1) Applicability All engines of Series 912 A, 912 F, 912 S, 914 F and 912 iSc Sport are affected, if at least one of following criteria applies:
Criterion A) Engine Serial number:
These engines have been originally delivered from the factory with the affected propeller shaft part no. 937047.
NOTE: On engines with S/N higher than those listed above, propeller shaft exchange has already been completed during serial production.
Engine type Serial number 912 A from S/N 10000823 up to S/N 1000826 inclusive 912 S S/N 10000403 / S/N 10000405 / S/N 10000406 S/N 10000408 / S/N 10000409 from S/N 10000411 up to S/N 10000414 inclusive from S/N 10000472 up to S/N 10000475 inclusive S/N 10000789 / S/N 10000790 / S/N 10000792 S/N 10000793 / S/N 10000832 914 F from S/N 10000878 up to S/N 10000887 inclusive 912 iSc Sport S/N 10000893 / S/N 10000894 / S/N 10001088 S/N 10001089
d07066.fm 25 July 2023 72-10-00 Initial Issue Page 2 of 9 Copyright - BRP-Rotax GmbH & Co KG. All rights reserved.
SB-912-078 / SB-914-059 / SB-912 i-014
SERVICE BULLETIN Criterion B) Spare parts:
These propeller shafts have been delivered as a spare part or as a part of a gearbox assy. are also affected:
NOTE: Propeller shaft with serial number (S/N) lower or higher than the range listed above are not affected.
General
1.2) Concurrent ASB/SB/SI and SL In addition to this Service Bulletin the following documents must be observed and complied with:
- in general all relevant Alert Service Bulletins (ASB), Service Bulletins (SB), Service Instructions (SI), Service Letters (SL), Service Instruction - Parts and Accessories (SI-PAC) with relevance to perform this maintenance, repair or overhaul task.
1.3) Reason Due to a deviation in the machining process of the propeller shaft, the affected batch shows abnormalities on the surface. This could lead to increased wear of the propeller shaft bearings and subsequent serious engine problems.
1.4) Subject Exchange of propeller shaft on ROTAX® Engine Type 912/914 (Series) and 912 i (Series).
1.5) Compliance
- Before next flight check the magnetic plug according to the latest Maintenance Manual Line (MML). If the magnetic plug indicates a good condition of the gearbox, it is allowed to repeat this inspection every 10 hours up to 50 hours of engine TSN. At latest, at 50 hours of engine TSN carry out this exchange of the propeller shaft on the engines listed in section 1.1, according to the instructions in section 3
- Exchange the propeller shaft on engines prior to initial installation Return affected spare parts to authorized service partner
- On engines, gearbox assy. and propeller shaft, prior to delivery Propeller shaft part no. Serial number 937047 S/N 222444 / S/N 222459 / S/N 222465 / S/N 222472 S/N 222480 / S/N 222485 / S/N 222492 / S/N 222496 S/N 222517 / S/N 222548 / S/N 222588 / S/N 222596 S/N 222615 / S/N 222622 / S/N 222626 / S/N 222632 S/N 222641 / S/N 222644 / S/N 222665 / S/N 222700 S/N 222715 m WARNUNGNOTICE Please also contact the aircraft manufacturer for possible further aircraft related information and requirements related to further accessory parts.
m WARNUNGmWARNING Non-compliance with these instructions could result in engine damages, personal injuries or death.
d07066.fm SB-912-078 / SB-914-059 / SB-912 i-014
SERVICE BULLETIN 25 July 2023 72-10-00 Initial Issue Page 3 of 9 Copyright - BRP-Rotax GmbH & Co KG. All rights reserved.
1.6) Approval The technical content of this document is approved under the authority of the DOA ref.
EASA.21J.048.
1.7) Labor time A labor credit will be provided for work performed by a technician with current applicable iRMT rating.
To apply for labor credit, contact your ROTAX® Authorized Distributor or their independent Service Centers.
1.8) Mass data Change of weight - - - none.
Moment of inertia - - - unaffected.
1.9) Electrical load data No change.
1.10) Software modifications No change.
1.11) References In addition to this technical information refer to current issue of
- in general Illustrated Parts Catalog (IPC) and in particular:
Chapter 72-10-00 and 73-10-00
- in general Installation Manual (IM) and in particular:
Chapter 61-00-00 and 73-00-00
- in general Maintenance Manual Line (MML) and in particular:
Chapter 12-20-00
- in general Maintenance Manual Heavy (MMH) and in particular:
Chapter 72-00-00 and 73-00-00 NOTE: The status of the Manuals can be determined by checking the table of amendments.
The 1st column of this table shows the revision status. Compare this number to the one listed on the ROTAX website:
www.flyrotax.com. Updates and current revisions can be downloaded for free.
1.12) Other Publications affected None.
1.13) Interchangeability of parts
- All used parts are unserviceable and must be returned FCA (Free CArrier) to ROTAX ® authorized distributors or their independent Service Centers Work performed iRMT ratingrequired Laborcredit Disassembly, inspection, reassembly, engine test run and logbook entry as per Chapter 3 (per engine) iRMT Maintenance Heavy
2.5 hours
d07066.fm 25 July 2023 72-10-00 Initial Issue Page 4 of 9 Copyright - BRP-Rotax GmbH & Co KG. All rights reserved.
SB-912-078 / SB-914-059 / SB-912 i-014
SERVICE BULLETIN
2) Material Information
2.1) Material Price and availability will be provided on request by ROTAX® Authorized Distributors or their independent Service Centers.
2.2) Company support information
- Any possible support by BRP-Rotax will be provided on request by ROTAX ® Authorized Distributors or their independent Service Centers
- Exchanged parts must be returned FCA (Free CArrier) to ROTAX ® Authorized Distributors or their independent Service Centers
- Shipping costs, downtime costs, loss of income, telephone costs etc. or costs of conversion to other engine versions or additional work, as for instance simultaneous engine overhauls are not covered in this scope and will not be borne or reimbursed by ROTAX®
2.3) Material requirement per engine See Fig. 1.
Parts requirement in case of replacement:
Fig. 1 Part no. Qty/engine Description Application 937047 1 Propeller shaft Version 2 832587 1 Ball bearing 35-72-17 Gearbox side 950470 1 Oil seal 40x55x7 Gearbox side 232246 1 Roller bearing Crankcase side 950200 1 Oil seal 30x52x7 Crankcase side 950228 1 Isolating flange Fuel pump (912 Series)
1. Propeller shaft
2. Oil seal 40x55x7
3. Ball bearing 35-72-17
4. Roller bearing
5. Oil seal 30x52x7
6. Isolating flange
d07066.fm SB-912-078 / SB-914-059 / SB-912 i-014
SERVICE BULLETIN 25 July 2023 72-10-00 Initial Issue Page 5 of 9 Copyright - BRP-Rotax GmbH & Co KG. All rights reserved.
2.4) Material requirement per spare part None.
2.5) Rework of parts None.
2.6) Special tooling/lubricants- /adhesives- /sealing compounds See Fig. 2.
Price and availability will be supplied on request by ROTAX® Authorized Distributors or their independent Service Centers:
Description Qty/engine Part no. Application EXTRACTOR ASSY. 1 877615 Roller bearing 25x25x15, oil seal 30x52x7 PULL -IN SPINDLE M24x1.5 1 877580 Extractor assy.
BOLT 12x250 1 276155 Extractor assy.
HEX. SCREW M24x1.5 - 19 MM 1 842585 Extractor assy.
PRESS-OUT MUSHROOM 1 877605 Prop shaft (Version 2) PRESS-IN JIG 1 877594 Oil seal 30x52x7 (Version 2) PRESS-IN MUSHROOM 1 877590 Roller bearing 25x52x15 STUD M10x45/20 1 941180 Roller bearing 25x52x15, oil seal 30x52x7 PULL-OUT PLATE 1 877561 Roller bearing 25x52x15, oil seal 30x52x7 HEX. NUT M10 1 242092 Roller bearing 25x52x15, oil seal 30x52x7 THREAD BOLT M8x50 1 240880 Crankshaft locking screw PUSHING JIG ASSY. 1 877540 Gearbox PULLER ASSY. 1 877660 Gearbox MOUNTING YOKE 1 876885 To compress dog gear LOCTITE 243 BLUE as required 897651 Hex. screw M7x16 LOCTITE ANTI SEIZE 8151 as required 297434 Propeller shaft at ball bearing LOCTITE 5910 as required 899791 Flange sealant
d07066.fm 25 July 2023 72-10-00 Initial Issue Page 6 of 9 Copyright - BRP-Rotax GmbH & Co KG. All rights reserved.
SB-912-078 / SB-914-059 / SB-912 i-014
SERVICE BULLETIN Fig. 2 m WARNUNGNOTICE If using these special tools observe the manufacturers specifications.
1. Extractor assy.
2. Pull-in spindle M24x 1.5
3. Bolt 12x250
4. Hex. screw M24x1.5
5. Press-out mushroom
6. Press-out mushroom.
7. Press-in jig
8. Press-in mushroom
9. Stud M10x45/20
10. Pull-out plate
11. Hex. nut M10
12. Thread bolt M8x50
13. Puller assy.
14. Pushing jig assy.
15. Mounting yoke
d07066.fm SB-912-078 / SB-914-059 / SB-912 i-014
SERVICE BULLETIN 25 July 2023 72-10-00 Initial Issue Page 7 of 9 Copyright - BRP-Rotax GmbH & Co KG. All rights reserved.
3) Accomplishment/Instructions
- ROTAX ® reserves the right to make any amendments to existing documents, which might become necessary due to this standardization, at the time of next revision or issue.
NOTE: Before maintenance, review the entire documentation to make sure you have a complete understanding of the procedure and requirements.
Accomplishment All measures must be implemented and confirmed by at least one of the following persons or organizations:
- ROTAX ® - Airworthiness representatives
- ROTAX ® - Authorized Distributors or their independent Service Centers
- Persons approved by the respective Aviation Authorities
- Persons with approved qualifications for the corresponding engine types. Only authorized persons (iRMT, Level Heavy Maintenance) are entitled to carry out this work
- Persons with type-specific training NOTE: Indicates supplementary information which may be needed to fully complete or understand an instruction.
General Further material on general inspection, maintenance and repair can also be found in relevant Advisory Circular AC 43.13 from FAA.
Advisory Circular The Advisory Circular (AC) contains maintenance methods, techniques and practices.
Procedure
3.1) Illustrated Parts Catalog - related information
3.2) Installation - related information All work has to be performed in accordance with the relevant ROTAX® Instructions for Continued Airworthiness (ICA) of the respective engine type.
Step Procedure 1 Check the criteria given on page 1, section 1.1, if the aircraft engine is affected by this SB.
2 Check the engine logbook and maintenance documentation, if this SB has already been accomplished.
See current Illustrated Parts Catalog (IPC) for the respective engine type, Chapter 72-10-00 and 73-10-00.
See current Installation Manual (IM) for the respective engine type, Chapter 61-00-00 and 73-00-00.
d07066.fm 25 July 2023 72-10-00 Initial Issue Page 8 of 9 Copyright - BRP-Rotax GmbH & Co KG. All rights reserved.
SB-912-078 / SB-914-059 / SB-912 i-014
SERVICE BULLETIN
3.3) Operation - related information
3.4) Maintenance (Line) - related information
3.5) Maintenance (Heavy) - related information Following instructions in the current Maintenance Manual Heavy (MMH) and Maintenance Manual Line (MML), perform the following tasks:
- Remove gearbox assy. from the engine
- Disassemble gearbox and press out affected propeller shaft
- Reassemble the gearbox using a new propeller shaft, oil seal and ball bearing
- Remove crankcase side propeller shaft roller bearing and oil seal and replace with new
- Attach gearbox assy. to crankcase
- In the case of an engine installed in an aircraft, perform an engine test run NOTE: Only authorized person (iRMT, Level Heavy Maintenance) are entitled to carry out this work.
3.6) Test run Conduct test run.
In case of uninstalled engines test run is accomplished with the mandatory test run after installation into aircraft.
See current Operators Manual (OM) for the respective engine type.
See current Maintenance Manual Line (MML) for the respective engine type, Chapter 12-00-00.
For removal, disassembly/assembly and installation see current Maintenance Manual Heavy (MMH) for the respective engine type, Chapter 72-00-00 and 73-00-00.
For removal and installation of the gearbox assy. see current Maintenance Manual Line (MML) for the respective engine type, Chapter 12-20-00.
See current Maintenance Manual Line (MML) for the respective engine type, Chapter 12-20-00.
d07066.fm SB-912-078 / SB-914-059 / SB-912 i-014
SERVICE BULLETIN 25 July 2023 72-10-00 Initial Issue Page 9 of 9 Copyright - BRP-Rotax GmbH & Co KG. All rights reserved.
3.7) Engine log entry
3.8) Summary These instructions (section 3) have to be followed in accordance with the deadlines specified in section 1.5.
The execution of the mandatory Service Bulletin must be confirmed in the logbook.
NOTE: Work on EASA certified parts might affect the EASA Form 1 and does require appropriate documentation by authorized persons. Repairs must be entered into the engine logbook and also do apply for the EASA Form 1.
A revision bar outside of the page margin indicates a change to text or graphic.
Translation into other languages might be performed in the course of language localization but does not lie within ROTAX® scope of responsibility.
In any case the original text in English language and the metric units are authoritative.
3.9) Inquiries Inquiries regarding this Service Bulletin should be sent to the ROTAX® Authorized Distributor of your area.
A list of all ROTAX® Authorized Distributors or their independent Service Centers is provided on https://dealerlocator.flyrotax.com.
NOTE: The illustrations in this document show the typical construction. They may not represent full detail or the exact shape of the parts which have the same or similar function.
Exploded views are not technical drawings and are for reference only. For specific detail, refer to the current documents of the respective engine type.
Step Procedure 1 Make an entry in the engine logbook stating the corrective actions performed.
m WARNUNGNOTICE If engine is still within its original packaging the (blue) plastic bag must carefully re-sealed after performing this inspection. The plastic bag contains a Volatile Corrosion Inhibitor (VCI) essential to maintain appropriate storage conditions.