Service bulletin · Sikorsky

No revision namedSikorsky ASB 92-20-001 · 22 pages · 2.1 MB

© Sikorsky. Filed by the FAA in regulations.gov docket FAA-2014-0216; AD 2014-07-04, 2014-07-04 R1 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2014-0216 (document 0002) · AD 2014-07-04, AD 2014-07-04-R1

Manufacturer
Sikorsky
Type
Alert Service Bulletin
Number
92-20-001

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 2

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Text · 22Partly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers. © Sikorsky. Filed by the FAA in regulations.gov docket FAA-2014-0216; AD 2014-07-04, 2014-07-04 R1 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '3951b81a37818c675d0e2d44405e2e9af2f0fca52a188277ea27a955922652f9'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

1. PLANNING INFORMATION A. Effectivity S-92A model helicopters delivered with serial numbers 920006 through 920022.

Component:

B. Purpose To perform a one time installation of clamps to provide additional clearance between the electrical harnesses on the upper deck and the hydraulic hoses.

C. Description Helicopter is prepared for maintenance. Cowling is opened to expose electrical lines and hydraulic hoses. Additional clamps are added to the AC Generator/Engine Inlet Anti-ice Feeders, electrical AFCS main harnesses, ECS, and HUMS harnesses. Cowling is closed.

Helicopter is returned to service.

D. Compliance Compliance is essential. The one-time installation outlined herein is to be accomplished within 30 days from the issue date of this Alert Service Bulletin (ASB).

E. Approval The Technical aspects of this ASB are FAA approved.

THIS ALERT SERVICE BULLETIN IS THE PROPERTY OF SIKORSKY AIRCRAFT CORPORATION AND IS PROTECTED UNDER THE COPYRIGHT LAWS OF THE UNITED STATES AND OTHER COUNTRIES. THIS ALERT SERVICE BULLETIN IS DISTRIBUTED ONLY TO OWNERS/OPERATORS OF COMMERCIALLY-CERTIFIED

SIKORSKY HELICOPTERS AND SIKORSKY-AUTHORIZED LOGISTIC AND SERVICE CENTERS FOR THE PURPOSE OF FOSTERING THE SAFE AND EFFICIENT

OPERATION OF SUCH HELICOPTERS AND UNDER THE EXPRESS CONDITION THAT THE CONTENTS OF THIS ALERT SERVICE BULLETIN ARE NOT TO BE

DISCLOSED, REPRODUCED, OR DISTRIBUTED, IN WHOLE OR IN PART, TO ANY THIRD PARTY, OR ADAPTED AS A DERIVATIVE WORK, WITHOUT THE EXPRESS DOCUMENTED CONSENT OF SIKORSKY AIRCRAFT CORPORATION. ANY ACT IN VIOLATION OF APPLICABLE LAW MAY RESULT IN CIVIL AND/OR CRIMINAL PENALTIES.

LIMITED DISTRIBUTION R SIKORSKY AIRCRAFT CORPORATION 1999

ALL RIGHTS RESERVED No. 92-20-001 Subject: STANDARD PRACTICES - Electrical/AFCS/ECS/HUMS Harnesses - To Provide Clearance Improvements on the Helicopter Upper Deck - One-Time Installation of Clamps October 2705 Page 1 of 20 20-00-00

F. Manpower (Estimated) No. of Men No. of Hours Man-Hours Installation of Clamps 1 2.0 2.0 NOTE: Estimate does not include time required to prepare helicopter or return it to flight status.

G. Material None.

H. Tooling None.

I. Weight and Balance Change is as follows: 0.62 pounds @STA 299.6, ButtLine (BL) -13.7 Right Hand Side (RHS), Water Line (WL) 270.1.

J. Electrical Load Data Not Affected.

K. References S92A-AMM-000 L. Publications Affected S92A-AMM-000, Chapter Section 21-24-01.

No. 92-20-001 STANDARD PRACTICES - Electrical/AFCS/ECS/HUMS Harnesses - To Provide Clearance Improvements on the Helicopter Upper Deck - One-Time Installation of Clamps

1. PLANNING INFORMATION (Continued) October 2705 Page 2 20-00-00

A. Basis for Material Data Per helicopter B. Bill of Material New Part No. Qty Key Word Instructions/Disposition AN743-C12 1 Clip (1)(2) MS21044N3 10 Nut (1)(2) MS21919WDG10 3 Clamp (1)(2) MS21919WDG12 3 Clamp (1)(2) MS21919WDG13 1 Clamp (1)(2) MS21919WDG5 1 Clamp (1)(2) MS21919WDG7 6 Clamp (1)(2) MS21919WDG9 1 Clamp (1)(2) MS27039-1-08 5 Screw (1)(2) MS27039-1-09 3 Screw (1)(2) MS27039-1-25 1 Screw (1)(2) MS27039-1-30 1 Screw (1)(2) MS27039C1-32 1 Screw (1)(2) MS27039C1-48 1 Screw (1)(2) MS9592-101 1 Angle Bracket (1)(2) NAS1149D0332K 10 Washer (1)(2) NAS43DD3-60 1 Spacer (1)(2) NAS43DD3-60FC (ALT) 1 Spacer (1)(2) NAS43DD3-80 1 Spacer (1)(2) NAS43DD3-80FC (ALT) 1 Spacer (1)(2) R23100-4 A/R Spiral Wrap (1)(2) RAWMA27-407-084 (ALT) A/R Spiral Wrap (1)(2) SS7057-2 A/R Lacing Tape (1)(2) RAWMA12-942-002 (ALT) A/R Lacing Tape (1)(2) SS7563-10NBC 1 Clamp (1)(2) SS7563-10NBCL (ALT) 1 Clamp (1)(2) SS7563-16-NBC 4 Clamp (1)(2) SS7563-16-NBCL (ALT) 4 Clamp (1)(2) SS7563-3NBC 2 Clamp (1)(2) SS7563-8NBC 2 Clamp (1)(2) SS7563-8NBCL (ALT) 2 Clamp (1)(2) SS1090-03 1 Bracket, Angle (1)(2)

(1) Procure from local stock.

No. 92-20-001 STANDARD PRACTICES - Electrical/AFCS/ECS/HUMS Harnesses - To Provide Clearance Improvements on the Helicopter Upper Deck - One-Time Installation of Clamps

2. MATERIAL INFORMATION October 2705 Page 3 20-00-00

(2) If needed, the above parts are available at no-cost. Submit a no-cost purchase order referencing the Alert Service Bulletin number and helicopter serial numbers upon which these parts will be used. This will allow HSI and the operator to track shipment and receipt of parts. Orders will be accepted by letter, telephone, facsimile (FAX), or HSI website: www.HSIUS.com. For prompt shipment, reference address of each shipping destination. Direct your order to:

HELICOPTER SUPPORT INC.

124 Quarry Road P.O. Box 111068, Trumbull, CT 06611 Attn: Customer Service FAX: (203) 416-4291 Telephone: (203) 416-4000 HSI website: www.HSIUS.com C. Consumable Material None.

WARNING OBSERVE ALL CAUTIONS AND WARNINGS ON CONTAINERS WHENUSING CONSUMABLES. WHEN APPLICABLE, WEAR NECESSARY PROTECTIVE GEAR DURING HANDLING AND USE. IF A

CONSUMABLE IS FLAMMABLE OR EXPLOSIVE, MAKE CERTAIN

CONSUMABLE AND ITS VAPORS ARE KEPT AWAY FROM HEAT, SPARK, AND FLAME. MAKE CERTAIN FIREFIGHTING EQUIPMENT IS READILY AVAILABLE PRIOR TO USE. FOR ADDITIONAL

INFORMATION ON TOXICITY, FLASHPOINT, AND FLAMMABILITY OF

CHEMICALS, CONSULT YOUR MEDICAL PEOPLE, OR THE MANUFACTURER OF THE CONSUMABLE.

As Req ’d Compound, Sealing AMS-3265B, or equivalent

3. ACCOMPLISHMENT INSTRUCTIONS A. Perform a one-time installation of additional clamps as follows:

(1) Prepare helicopter for maintenance.

(2) Turn off all electrical and hydraulic power.

(3) Open cowling to gain access to electrical cables and hydraulic hoses.

No. 92-20-001 STANDARD PRACTICES - Electrical/AFCS/ECS/HUMS Harnesses - To Provide Clearance Improvements on the Helicopter Upper Deck - One-Time Installation of Clamps

2. MATERIAL INFORMATION October 2705 Page 4 20-00-00

(4) Location:

looking down and inboard Right Hand Side (RHS) at STA 270.5, Right Buttline (RBL)

24.5 and WL 269.5.

Install MS21919WDG12 clamp, SS7563-10NBC (SS7563-10NBCL ALT) clamp, MS27039-1- 08 screw, NAS1149D0332K washer, and secure using MS21044N3 nut. Tighten securely.

Refer to Figure 1., Page 8.

(5) Location:

looking down and inboard RHS at STA 289.5, RBL 26.8, and WL 271.5.

Install MS21919WDG12 clamp, SS7563-16NBC (SS7563-16NBCL ALT) clamp, MS27039-1- 08 screw, NAS1149D0332K washer, and secure using MS21044N3 nut. Tighten securely.

Refer to Figure 2., Page 9.

(6) Location:

looking down and Aft RHS at STA 297, RBL 23.8, and WL 271.

Install one MS27039C1-48 screw through MS9592-101 clip into block support . Install MS21919WDG13 clamp, MS27039-1-08 screw, NAS1149D0332K washer, and secure using MS21044N3 nut. Tighten securely. Refer to Figure 3., Page 10.

(7) Location:

looking down and inboard RHS at STA 303, RBL 21.3, and WL 268.

Redress ground block support wire. Reroute to avoid hydraulic lines. Refer to Figure 4., Page 11.

(8) Location:

looking down and inboard RHS at STA 304, RBL 25, and WL 270.

Install MS21919WDG10 clamp, SS7563-16NBC (SS7563-16NBCL ALT) clamp, MS21919WDG7 clamp, SS7563-8NBC (SS7563-8NBCL ALT) clamp, MS27039-1-25 screw, and NAS1149D0332K washer, NAS43DD3-60 (NAS43DD3-60FC ALT) spacer, and secure using MS21044N3 nut. Tighten securely. Refer to Figure 5., Page 12.

(9) Location:

looking down and Aft RHS at STA 313, RBL 27, and WL 270.

Install MS21919WDG7 clamp, MS21919WDG10 clamp, SS7563-16NBC (SS7563-16NBCL ALT) clamp, MS27039-1-09 screw, and NAS1149D0332K washer, and secure using MS21044N3 nut. Tighten securely. Refer to Figure 6., Page 13.

(10) Location:

looking down and inboard RHS at STA 320, RBL 30, and WL 270.

Install MS21919WDG7 clamp, MS21919WDG10 clamp, SS7563-16NBC (SS7563-16NBCL ALT) clamp, MS27039-1-30 screw, and NAS1149D0332K washer, NAS43DD3-80 (NAS43DD3-80FC ALT) spacer, and secure using MS21044N3 nut. Tighten securely. Refer to Figure 7., Page 14.

No. 92-20-001 STANDARD PRACTICES - Electrical/AFCS/ECS/HUMS Harnesses - To Provide Clearance Improvements on the Helicopter Upper Deck - One-Time Installation of Clamps

3. ACCOMPLISHMENT INSTRUCTIONS (Continued) October 2705 Page 5 20-00-00

(11) Location:

looking down and inboard RHS at STA 348, RBL 22.5, and WL 280 and Left Hand Side (LHS) LBL 22.5.

Install R23100-4 (RAWMA27-407-084 ALT) Spiral Wrap and secure tightly using SS7057-2 (RAWMA12-942-002 ALT) Lacing Tape. LHS is the same install. refer to Figure 8., Page

15.

(12) Location:

looking down and forward LHS at STA 274, LBL 17, and WL 270.

Install MS21919WDG7 clamp, MS21919WDG9 clamp, SS7563-8NBC (SS7563-8NBCL ALT) clamp, MS27039-1-09 screw, and NAS1149D0332K washer, and secure using MS21044N3 nut. Tighten securely. Refer to Figure 9., Page 16.

(13) Location:

looking down and Aft LHS at STA 294, LBL 23, and WL 271.

Install MS21919WDG5 clamp, SS7563-3NBC clamp, MS27039-1-08 screw, and NAS1149D0332K washer, and secure using MS21044N3 nut. Tighten securely. Refer to Figure 10., Page 17.

(14) Location:

looking down and inboard LHS at STA 303, LBL 26, and WL 269.

Install AN743-C12 clip, MS27039C1-32 screw into block support. Install MS21919WDG7 clamp, MS27039-1-08 screw, and NAS1149D0332K washer, and secure using MS21044N3 nut. Tighten securely. Refer to Figure 11., Page 18.

(15) Location:

looking down and Aft LHS at STA 310, LBL 26.7, and WL 268.5.

Install MS21919WDG7 clamp, MS21919WDG12 clamp, SS7563-3NBC clamp, MS27039-1- 09 screw, and NAS1149D0332K washer, and secure using MS21044N3 nut. Tighten securely. Refer to Figure 12., Page 19.

(16) Location:

looking down and inboard RHS at STA 321.8, RBL 11.7, and WL 283.5.

Remove and hold for reuse existing SS7560H4R clamp, AN3-3A bolt, NAS1149D0332K washer, and MS21044N3 nut. Refer to Figure 13., Page 20.

(17) Location:

looking down and inboard RHS at STA 315, RBL 13.5, and WL 278.5.

Install SS1090-03 angle bracket onto existing bolt, washer, and nut. Torque nut to 115 in-pounds. Apply AMS-3265B sealing compound as required to coat bolt, washer, and nut.

Install/Reuse SS7560H4R clamp, AN3-3A bolt, NAS1149D0332K washer, and MS21044N3 nut. Refer to Figure 13., Page 20.

(18) Return helicopter to service.

No. 92-20-001 STANDARD PRACTICES - Electrical/AFCS/ECS/HUMS Harnesses - To Provide Clearance Improvements on the Helicopter Upper Deck - One-Time Installation of Clamps

3. ACCOMPLISHMENT INSTRUCTIONS (Continued) October 2705 Page 6 20-00-00

B. Record of Compliance

(1) Make an appropriate logbook entry to show compliance with this ASB 92-20-001.

(2) Upon compliance with this Alert Service Bulletin, complete attached ALERT SERVICE BULLETIN COMPLIANCE RECORD CARD and return it to Sikorsky Aircraft Corporation.

No. 92-20-001 STANDARD PRACTICES - Electrical/AFCS/ECS/HUMS Harnesses - To Provide Clearance Improvements on the Helicopter Upper Deck - One-Time Installation of Clamps

3. ACCOMPLISHMENT INSTRUCTIONS (Continued) October 2705 Page 7 20-00-00

SA TD1480_1 92552-04102 (REF) 92552-01117 (REF) INSTALL:

MS21919WDG12 CLAMP - 1 REQ’D SS7563-10NBC CLAMP - 1 REQ’D MS27039-1-08 SCREW - 1 REQ’D NAS1149D0332K WASHER - 1 REQ’D MS21044N3 NUT - 1 REQ’D STA 270.5 RBL 24.5 WL 269.5 UP FWD FIGURE 1. LOCATION LOOKING DOWN AND INBOARD RIGHT HAND SIDE No. 92-20-001 October 2705 Page 8 20-00-00

SA TD1480_2 92552-04102 (REF) 92552-01117 (REF) INSTALL:

MS21919WDG12 CLAMP - 1 REQ’D SS7563-16NBC CLAMP - 1 REQ’D MS27039-1-08 SCREW - 1 REQ’D NAS1149D0332K WASHER - 1 REQ’D MS21044N3 NUT - 1 REQ’D STA 289.5 RBL 26.8 WL 271.5 INBD FWD FIGURE 2. LOOKING DOWN AND INBOARD RIGHT HAND SIDE No. 92-20-001 October 2705 Page 9 20-00-00

SA TD1480_3 92552-04102 (REF) 92552-01117 (REF) INSTALL:

MS21919WDG13 CLAMP - 1 REQ’D MS27039-1-08 SCREW - 1 REQ’D NAS1149D0332K WASHER - 1 REQ’D MS21044N3 NUT - 1 REQ’D MS9592-101 CLIP - 1 REQ’D STA 297 RBL 23.8 WL 271 UP AFT 92552-07104 (REF) INSTALL:

MS27039C1-48 SCREW - 1 REQ’D FIGURE 3. LOOKING DOWN AND AFT RIGHT HAND SIDE No. 92-20-001 October 2705 Page 10 20-00-00

SA TD1480_4

REDRESS GROUND BLOCK

WIRE ROUTING TO AVOID

HYD LINES STA 303 RBL 21.3 WL 268 OUTBD 92552-07104 (REF) 92552-07104 (REF)

REDRESS GROUND BLOCK

WIRE ROUTING TO AVOID

HYD LINES 92552-04102 (REF) 92552-01117 (REF) AFT FIGURE 4. LOOKING DOWN AND INBOARD RIGHT HAND SIDE No. 92-20-001 October 2705 Page 11 20-00-00

SA TD1480_5 92552-04102 (REF) 92552-01117 (REF) INSTALL:

MS21919WDG10 CLAMP - 1 REQ’D SS7563-16NBC CLAMP - 1 REQ’D MS21919WDG7 CLAMP - 1 REQ’D SS7563-8NBC CLAMP - 1 REQ’D MS27039-1-25 SCREW - 1 REQ’D NAS1149D0332K WASHER - 1 REQ’D NA43DD3-60 SPACER - 1 REQ’D MS21044N3 NUT - 1 REQ’D STA 304 RBL 25 WL 270 UP FWD 92552-07104 (REF) FIGURE 5. LOOKING DOWN AND INBOARD RIGHT HAND SIDE No. 92-20-001 October 2705 Page 12 20-00-00