Service bulletin · Partenavia

On this page

Copies · 2

Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

No revision namedNOR10 707-30C - SECTION 5 · 36 pages · 1.3 MB

© Vulcanair. Filed by the FAA in regulations.gov docket FAA-2015-3656, the docket of AD 2015-18-01. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2015-3656 (document 0002) · AD 2015-18-01

No revision namedNOR10 707-30C - SUPPLEMENT F · 42 pages · 1.4 MB

© Vulcanair. Filed by the FAA in regulations.gov docket FAA-2015-3656, the docket of AD 2015-18-01. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2015-3656 (document 0002) · AD 2015-18-01

Manufacturer
Partenavia
Type
Service Bulletin
Number
R10 707-30C

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

Text · 36Partly OCR

No revision named, the newest copy. Some pages are OCR from a scan. OCR can misread letters and numbers. © Vulcanair. Filed by the FAA in regulations.gov docket FAA-2015-3656, the docket of AD 2015-18-01. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '00dd1bd796dbeb44d8d5967de984f1dcb624235d35a4da5796d7e59b46f5a211'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

A.F.M. P/N NOR10.707-30C Section 5 P.68R PERFORMANCE

Rev. 27 DATE: 23 April 2015 5-i

SECTION 5

PERFORMANCE

TABLE OF CONTENTS

PARAGRAPH PAGE

5.1 GENERAL 5-1

5.2 INTRODUCTION - PERFORMANCE CHARTS 5-1

5.3 FLIGHT PLANNING EXAMPLE 5-2

5.4 AIRSPEED CALIBRATION 5-8

5.5 ALTIMETER CORRECTION 5-9

5.6 ALTERNATE STATIC SOURCE 5-9

5.7 TEMPERATURE CORRECTION CHART 5-9

5.8 WIND COMPONENT 5-9

5.9 STALL SPEED 5-12

5.10 TAKE-OFF DISTANCE 5-13

5.11 TWIN ENGINE CLIMB - MCP CLIMB 5-15

5.12 ONE ENGINE INOPERATIVE CLIMB 5-17

5.13 BALKED LANDING CLIMB 5-19

5.14 TIME, FUEL AND DISTANCE TO CLIMB - MCP CLIMB 5-21

A.F.M. P/N NOR10.707-30C Section 5 PERFORMANCE P.68R

Rev. 27 5-ii DATE: 23 April 2015

SECTION 5

PERFORMANCE

TABLE OF CONTENTS

PARAGRAPH PAGE

5.15 CRUISE PERFORMANCE - BEST ECONOMY MIXTURE

• SEA LEVEL 5-23

• 3000 FT 5-24

• 6000 FT 5-25

• 9000 FT 5-26

• 12000 FT 5-27

5.16 OPERATING ENVELOPE 5-28

5.17 RANGE PROFILE 5-29

5.18 TIME, FUEL AND DISTANCE TO DESCENT 5-31

5.19 LANDING DISTANCE TO CLEAR 50 FT

OBSTACLE 5-33

A.F.M. P/N NOR10.707-30C Section 5 P.68R PERFORMANCE

Rev. 27 DATE: 23 April 2015 5-1

SECTION 5

PERFORMANCE

5.1 GENERAL This section provides performance information applicable to the P .68R, required by certification regulations and useful for flight planning.

Performance information associated with those optional systems and equipment which required flight manual supplements are provided by Section 8 (Supplements).

5.2 INTRODUCTION - PERFORMANCE CHARTS Performance data charts present ed in this Section may be used to know what to expect from the aircraft under various conditions , and also to facilitate the planning of flights with reasonable accuracy.

The performance charts are unfactored and do not make any allowance for varying degre es of pilot proficiency or airframe material or mechanical deterioration.

NOTE Performance loss should be expected when incorporating external modifications causing a significant increase in the aerodynamic drag.

A.F.M. P/N NOR10.707-30C Section 5 PERFORMANCE P.68R

Rev. 27 5-2 DATE: 23 April 2015

5.3 FLIGHT PLANNING EXAMPLE This paragraph provides information t o facilitate the flight planning by using the pertinent performance data charts presented in this Section.

The following example illustrates the correct use of the performance charts.

NOTE To obtain the fuel quantity in US Gal divide the fuel quantity expressed in lbs by 6.01.

Associated Conditions:

AIRCRAFT Take-Off Weight 4200 lbs Usable fuel 587.3 lbs (97.7 US Gal)

TAKE-OFF AIRPORT Outside Air Temperature 21°C (ISA +10°C) Pressure altitude 2000 ft Wind direction and speed 180° at 8 Kts Runway direction 330° CRUISE Outside Air Temperature ISA Pressure altitude 6000 ft En-Route Distance 400 nM

ARRIVAL AIRPORT Outside Air Temperature 21°C (ISA +10°C) Pressure altitude 2000 ft Wind direction and speed 330° at 12 Kts Runway direction 300° Procedure:

Take-Off Distance The measured take -off distance s are reported as a function of ambient temperature, including variations for weight change and wind influence.

1. Calculate the angle between wind direction and runway direction 180°-330°= -50°

2. Calculate the wind component parallel to runway (from Figure 5-3) 5 Kts - tailwind

A.F.M. P/N NOR10.707-30C Section 5 P.68R PERFORMANCE

Rev. 27 DATE: 23 April 2015 5-3

3. Enter Figure 5-5 at 21° OAT

4. Proceed horizontally right up to the 2000 ft airport altitude line

5. Proceed vertically downwards to the reference line

6. Follow the slope of the adiacent take -off lines until intersecting the horizontal 4200 lbs line

7. Proceed vertically downwards to the reference line

8. Follow the slope of the adiacent take -off lines until intersecting the horizontal 5 Kts - tailwind line

9. Proceed vertically downwards to obtain the required take -off distance of 1680 ft (512 m) Rate of climb – AEO MCP climb

1. Enter Figure 5-6 at 21° OAT

2. Proceed vertically upwards until intersecting the 2000 ft rate- of-climb graph

3. Proceed horizontally right up to the reference line

4. Follow the slope of the adiacent rate of climb lines until intersecting the vertical 4200 lbs line

5. Proceed horizontally right to obtain the AEO MCP rate of climb of 1170 ft/min Rate of climb – OEI climb

1. Enter Figure 5-7 at 2000 ft airport altitude

2. Proceed horizontally right up to the rate of climb at ISA +10°C

3. Proceed vertically downwards to the reference line

4. Follow the slope of the adiacent rate -of-climb lines until intersecting the horizontal 4200 lbs line

5. Proceed vertically downwards to obtain the OEI rate of climb of 250 ft/min Rate of climb – Balked landing climb

1. Enter Figure 5-8 at 2000 ft airport altitude

2. Proceed horizontally right up to the rate of climb at ISA +10°C

3. Proceed vertically downwards the reference line

4. Follow the slope of the adiacent rate- of-climb lines until intersecting the horizontal 4200 lbs line

5. Proceed vertically downwards to obtain the OEI rate of climb of 770 ft/min

A.F.M. P/N NOR10.707-30C Section 5 PERFORMANCE P.68R

Rev. 27 5-4 DATE: 23 April 2015 Time, Fuel and Distance to Climb – MCP climb Time, fuel and distance to climb are determin ed by calculating the difference between the airport and cruise conditions, thus the indicated procedure must be followed twice: the first for the airport conditions and the second for the cruise conditions.

1. Enter Figure 5-9 at the given altitude (airport or cruise)

2. Proceed horizontally right up to the time -to-climb line at given temperature

3. Proceed vertically downwards to the reference line

4. Follow the slope of the adiacent time -to-climb lines until intersecting the horizontal 4200 lbs line

5. Proceed vertical ly downwards to obtain the time to climb at the given altitude

6. Repeat the steps from 1 to 5 to calculate the fuel to climb at the given altitude

7. Repeat the steps from 1 to 5 to calculate the distance to climb at the given altitude In this example the calculation gives the following results:

Airport Time to Climb 1.5 min Cruise Time to Climb 5.2 min Time to Climb 5.2 - 1.5 = 3.7 min Airport Fuel to Climb 4.4 lbs Cruise Fuel to Climb 13.9 lbs Fuel to Climb 13.9 - 4.4 = 9.5 lbs (1.6 US Gal) Airport Distance to Climb 3.0 nM Cruise Distance to Climb 7.0 nM Distance to Climb 7.0 - 3.0 = 4.0 nM Time, Fuel and Distance to Descent Time, fuel and distance to descent are determined by calculating the difference between the cruise and landing airport conditio ns, thus the indicated procedure must be followed twice: the first for the cruise conditions and the second for the landing airport conditions.

1. Enter Figure 5-13 at the given altitude (cruise or airport)

2. Proceed vertically up to the time -to-descent line relating to selected R/S and read the required time to descent

A.F.M. P/N NOR10.707-30C Section 5 P.68R PERFORMANCE

Rev. 27 DATE: 23 April 2015 5-5

3. Proceed vertically up to the fuel -to-descent line relating to selected R/S and read the required fuel to descent

4. Proceed vertically up to the distance -to-descent line relating to selected R/S and read the required distance to descent In this example the calculation gives the following results , with a selected R/S of 500 fpm:

Landing Airport Time to Descent 4.0 min Cruise Fuel to Descent 12.5 min Time to Descent 12.5 - 4.0 = 8.5 min Landing Airport Fuel to Descent 3.5 lbs Cruise Fuel to Descent 11.5 lbs Fuel to Descent 11.5 - 3.5 = 8.0 lbs (1.3 US Gal) Landing Airport Distance to Descent 12.1 nM Cruise Distance to Descent 36.5 nM Distance to Descent 36.5 - 12.1 = 24.4 nM Cruise Performance – Best Economy Mixture The cruise distance is obtained by subtracting the calculated distance to climb and distance to descent from the total en-route distance:

Cruise Distance = En-route Distance - Climb Distance - Descent Distance = 400 - 4.0 - 24.4 = 371.6 nM The cruise power setting should be determined on the basis of the required and available fuel load.

From the Cruise Performance Table (figure 5 -10), at a cruise altitude of 6 000 ft (ISA) and a power rating of 6 5.5% (2350 RPM and 22 " Hg), the cruise airspeed is 159 KTAS at MTOW . Due to the lower take-off weight the cruise airspeed must be increased by 1 Kt.

From the same table, the fuel flow is 18.1 GPH (108.8 lbs/hr) total.

Cruise time and fuel may be calculated by the following formulas:

Cruise Time = Cruise Distance / Cruise Speed = 371.6 / 160 = 2.32 hours or 139.3 min Cruise Fuel = Fuel Flow x Cruise Time = 18.1 x 2.32 = 42.0 US Gal (252.4 lbs)

A.F.M. P/N NOR10.707-30C Section 5 PERFORMANCE P.68R

Rev. 27 5-6 DATE: 23 April 2015 Total Flight Time The total flight time is determined by adding time to climb, cruise time, and time to descent:

Total Flight Time = Time to Climb + Cruise Time + Time to Descent = 3.7 + 139.3 + 8.5 = 151.5 min Total Required Fuel The total required fuel is obtained by adding fuel for start, taxi and take -off (20 lbs), fuel to climb, cruise fuel, and fuel to descent:

Total Required Fuel = Fuel for Start, Taxi and Take- Off + Fuel to Climb + Cruise Fuel + Fuel to Descent = 20.0 + 9.5 + 252.4 + 8.0 = 289.9 lbs (48.2 US Gal) Reserve Fuel The reserve fuel is determined by subtracting the calculated t otal required fuel from the usable fuel:

Reserve Fuel = Usable Fuel - Total Required Fuel = 587.3 – 289.9 = 297.4 lbs (49.5 US Gal) Reserve fuel must exceed 60 lbs to allow a minimum of 45 minutes of flight time at 45% power (2200 RPM).

Landing Distance The measured landing distances (ove r 50 ft obstacle) are reported as a function of ambient temperature, including variations for weight change and wind influence.

1. Calculate the landing weight by substracting the total required fuel from the take-off weight = 4200 - 289.9 = 3910.1 lbs

2. Calculate the angle between wind direction and runway direction 330°-300°= 30°

3. Calculate the wind component parallel to runway (from Figure 5-3) 10 Kts - headwind

4. Enter Figure 5-14 at 21° OAT

5. Proceed horizontally right up to the 2000 ft landing airport altitude line

6. Proceed vertically downwards to the reference line

7. Follow the slope of the adiacent landing distance lines until intersecting the horizontal 3910 lbs line

A.F.M. P/N NOR10.707-30C Section 5 P.68R PERFORMANCE

Rev. 27 DATE: 23 April 2015 5-7

8. Proceed vertically downwards to the reference line

9. Follow th e slope of the adiacent take -off lines until intersecting the horizontal 10 Kts - headwind line

10. Proceed vertically downwards to obtain the required landing distance of 1360 ft (414 m)

Page 10OCROpen in PDF

A.F.M. P/N NOR10.707-30C vulcanair Section 5 aircraft PERFORMANCE P.68R

5.4 AIRSPEED CALIBRATION

a. Airspeed Indicator System Error vs. I.A.S.

Knots

TAKE-OFF FLAPS ANDING ERROR "E" L/G LANDING GEAR & FLAPS UP C.A.S. = I.A.S. - E DOWN 2- 60 80 100 120 140 160 180 I.A.S. Knots

b. Airspeed Indicator System Error vs. C.A.S.

Knots 5 LIG ANDING FL TAKE-OFF FLAPS APS (35° ANDING FEAR & FLAPS UP DOWN I.A.S. = C.A.S. + E 60 80 100 120 140 160 180 C.A.S. Knots Figure 5-1

AIRSPEED CALIBRATION Rev. 27 5-8 DATE: 23 April 2015

A.F.M. P/N NOR10.707-30C Section 5 P.68R PERFORMANCE

Rev. 27 DATE: 23 April 2015 5-9

5.5 ALTIMETER CORRECTION The maximum static error correction to be applied to the altimeter reading does not exceed 30 feet.

5.6 ALTERNATE STATIC SOURCE The alternate source valve is located on the left side of the control pedestal.

No static error correction must be applied to the altitude and airspeed indicator readings when static air is supplied by the alternate static source.

5.7 TEMPERATURE CORRECTION CHART See Figure 5-2.

5.8 WIND COMPONENT See Figure 5-3.

Maximum demonstrated crosswind velocity for take -off and landing is 25 Kts.

A.F.M. P/N NOR10.707-30C Section 5 PERFORMANCE P.68R

Rev. 27 5-10 DATE: 23 April 2015

Figure 5-2

TEMPERATURE CONVERSION