On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Text · 3
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © XtremeAir. Filed by the FAA in regulations.gov docket FAA-2018-0284; AD 2018-07-15 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '1fc5f54065e4a498180bfdac2ac56427a36c63ce2b95f51586dd989ac1a229f0' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '1fc5f54065e4a498180bfdac2ac56427a36c63ce2b95f51586dd989ac1a229f0' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
XtremeAir GmbH, Harzstr.2, D-39444 Hecklingen Document No.
SB-XA42-2018-006 Tel: +49 39267 60999 0, Fax: +49 39267 60999 20 www.xtremeair.de info@xtremeair.de Issue: A.00 DOA-Nr.: EASA.21J.360 Service Bulletin Date: 2 MAR 2018
Replaces Service Bulletin No. / Date:
Page 1 / 3 FDO-0010-331 C.00
MANDATORY
Subject: Engine Mount Inspection Aircraft models affected: XA42 & XA41 Applicability: Manufacturers serial numbers (MSN) 01 to 07 and 101 to 149 equipped with engine mount P/N XA42-7120-151 Compliance: Mandatory Time of Compliance: 1.) Initial visual inspection within the first 50 hours of operation of the engine mount or before the next flight
2.) Repetitive visual inspections after each 10 aerobatic flights* Purpose: To detect a potentially unsafe condition.
Background: A crack was detected on an engine mount frame diagonal strut during a scheduled maintenance inspection. If not detected, the crack could grow and subsequent partial or complete failure of the stru ctural joint possibly result in in -flight detachment of the engine and consequent loss of control of the aeroplane.
Manpower: Approximately ten (10) minutes are required to perform each inspection Materials: An inspection mirror and a flashlight are required to perform the inspection without removal of the cowling.
Accomplishment Instructions: Prior to the next flight and after each ten (10) aerobatic flights* thereafter, visually inspect the area of the junction of the L/H diagonal struts of the engine mount, forward of the oil cooler, for cracks.
* each flight during which a load factor of 6 g is exceeded
XtremeAir GmbH, Harzstr.2, D-39444 Hecklingen Document No.
SB-XA42-2018-006 Tel: +49 39267 60999 0, Fax: +49 39267 60999 20 www.xtremeair.de info@xtremeair.de Issue: A.00 DOA-Nr.: EASA.21J.360 Service Bulletin Date: 2 MAR 2018
Replaces Service Bulletin No. / Date:
Page 2 / 3 FDO-0010-331 C.00
LOOK FOR
CRACK HERE
XtremeAir GmbH, Harzstr.2, D-39444 Hecklingen Document No.
SB-XA42-2018-006 Tel: +49 39267 60999 0, Fax: +49 39267 60999 20 www.xtremeair.de info@xtremeair.de Issue: A.00 DOA-Nr.: EASA.21J.360 Service Bulletin Date: 2 MAR 2018
Replaces Service Bulletin No. / Date:
Page 3 / 3 FDO-0010-331 C.00
If a crack exists, remove and replace the engine mount.
Record execution of the inspection in the aircraft/airframe logbook.
Approval: The technical content of this document is approved under the authority of DOA ref. EASA. 21J.360.