STC SA00018IB

United States of America Department of Transportation Federal AviationAdministration Supplemental Type Certificate IMPORT Number: SA00018IB BERINGER AERO This certificate issued to:

AEROPOLE 05130 TALLARD, FRANCE Part 23 of Code of Federal Regulations. .

A00012NY Make: Diamond Aircraft Industries Inc.

Model: DA 62 Description of Type Design Change:

1) Installation of Main wheel, Nose wheel, brake assembly, axle, master cylinder and brake lines in accordance with Master Data List document MDL-STC-021, Revision 03, dated May 20, 2021 or later EASA approved revisions.

(See Description of Type Design Change continued on Page 3 of 3)

1) The installer must determine whether this design change is compatible with previously approved modifications.

(See Limitations and Conditions continued on Page 3 of 3)

Date of Application: April 5, 2021 Date Reissued:

Date of Issuance: October 15, 2021 Date Amended:

Anthony E. Gallo Title:

Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service

United States of America Department of Transportation Federal AviationAdministration Supplemental Type Certificate IMPORT Number: SA00018IB

United States of America Department of Transportation Federal AviationAdministration Supplemental Type Certificate IMPORT

(Continuation Sheet) Number: SA00018IB Description of Type Design Change: (continued from page 1 of 3)

2) Maintenance is in accordance with Instructions for Continued Airworthiness document, ICA-STC-021, Revision 01, dated May 20, 2021 or later EASA accepted revisions.

Limitation and Conditions: (continued from page 1 of 3)

2) If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

3) This STC is applicable to all serial numbers for Diamond Model DA 62

-----END-----