What it approves
Installation of Special Mission Equipment including Surveillance and Mission Radio Systems
What the certificate saysOCR
This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA00024MC This certificate issued to: ATK 236 Citation Drive Fort Worth, Texas 76106 Part 23 of the Federal Aviation Regulations.
Original Product - Type Certificate Number: A18SW Make: M7 Aerospace LP (Fairchild Aircraft, Inc.)
Model: SA 227-DC (C-26B) Description of Type Design Change:
Installation of Special Mission Equipment including Surveillance and Mission Radio Systems in accordance with ATK STC Data List, Document Number C26B.DALST.001, Revision G, dated April 17, 2009, or later FAA approved revision. Use of this STC requires FAA approved Airplane Flight Manual Supplement document number C26B.TMASP. 003, Revision IR, dated April 20, 2009, or later FAA approved revision and Instructions for Continued Airworthiness document number ATK6276, revision C, dated March 30, 2009, or later FAA approved revisions.
1. This approval is for U.S. Government use only and is limited to installations completed at the ATK facility in Fort Worth, Texas.
(See continuation sheet 3 of 3 for additional limitations)
Date of Application: August 15, 2007 Date Reissued:
Date of Issuance: April 20, 2009 Date Amended:
FEDERAL AVIATION By Direction of the Administrator tonald K. Pathneber Signature Ronald K. Rathgeber TOMNISTRATIO Manager Military Certification Office
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA00024MC Limitations and Conditions:
2. Installations not completed at ATK will require an FAA approved Installation Manual.
3. All installations will require completion of the EMI/RFI portion of the Ground Test Plan, ATK document number C26BR0000001-GTP, revision A, and the EMI/RFI portion of the Flight Test Plan, ATK document number C26BR0000003-FTP, revision A, or later FAA approved revision.
4. Following the replacement of government furnished equipment (GFE) or commercial offthe-shelf (COTS) equipment listed in Instructions for Continued Airworthiness ATK 6276, revision C, or later FAA approved revision, table 2-1, conduct a ground EMI survey with engines running in accordance with the EMI/RFI portion of the Ground Test Plan, ATK document number C26BR0000001-GTP, revision A, or later FAA approved revision.
5. This approval is limited to aircraft previously modified by installation of Lockheed Fort Worth STC SA8838SW.
6. This STC is intended for Military or Public Use only. Installation on commercial aircraft is prohibited.
7. This installation is placarded to prohibit flight into known icing conditions.
8. Eddy-Current inspection of the front wing spar is reduced to 5600 hours and every 2000 hours in accordance with the FAA approved Instructions for Continued Airworthiness (ICA) Revision C, dated March 30, 2009 or later FAA approved revision.
9. Maximum Takeoff Weight is limited to 15,150 pounds to maintain previously approved climb for noise control.
10. The compatibility of this modification with the installation of previously installed modifications is the responsibility of the installer.
---END
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| M7 Aerospace LP | SA227-DC (C-26B) | A18SW |