STC SA00033IB

IMPORT SA00033IB Exploits Valley Air Services Ltd.

70 C.L. Dobbin Drive Gander, Newfoundland and Labrador Canada A1V 1W7 Part 23 Title 14 Code of Federal Regulations A24CE Textron Aviation Inc.

1900D

1. Installation of Cargo Conversion must be in accordance with IMP Aerospace Engineering Data List Part A, MISC-6533/20001, Issue 1, Transport Canada Civil Aviation (TCCA) approved September 15, 2020, or later TCCA approved revision.

2. Operation must be in accordance with IMP Aerospace Engineering Flight Manual Supplement CIV-R024, Revision C, TCCA approved September 21, 2020, or later TCCA approved revision.

(Description of Type Design Change Continued on Page 3 of 3)

1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

(Limitations and Conditions Continued on Page 3 of 3) May 16, 2022 May 19, 2022

Anthony E. Gallo Manager, International Validation Branch (AIR-730) Compliance & Airworthiness Division Aircraft Certification Service (AIR) 3

IMPORT SA00033IB SA00033IB 3

IMPORT SA00033IB Date of Issuance: May 19, 2022

Description of Type Design Change (continued):

3. Maintenance must be done in accordance with IMP Aerospace Engineering Instructions for Continued Airworthiness Report CIV-R023, Revision D, dated September 11, 2020, or later TCCA accepted revision.

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. This STC is applicable to all serial numbers for this Make and Model.

4. Barrier nets are not to be installed at FS220.75 and FS250.75 unless an Emergency Exit is installed on the right-hand side of the fuselage forward of FS213.25.

5. Compliance with the Airworthiness Limitation contained in the Instructions for Continued Airworthiness Report CIV-R023, Revision D, dated September 11, 2020, is mandatory.

----------END---------- 3 3