What it approves
Installation of a target towing winch system. (S/N 617 only)
What the certificate saysOCR
This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA00081DE This certificate issued to: Skyline Aviation Part 3 of the Civil Air Regulations.
Original Product -Type Certificate Number: A2PC Make: Mitsubishi Model: MU-2B-35 (Serial Number 617 only) Description of Type Design Change:
Installation of a Target Towing Winch System in accordance with Branson Aircraft Corporation Drawing Numbers 56E001, Rev. A, dated June 8, 1993 and 56E002, Rev. A, dated June 8, 1993 or later FAA approved revisions.
1. This approval should not be extended to aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft.
2. Data pertaining to this modification are considered inadequate for duplication in other aircraft. This approval is limited to the installation in a Mitsubishi MU-2B-35, Serial Number 617 only.
3. FAA Approved Airplane Flight Manual Supplement, Rev. N/C, dated February 10, 1994 or later FAA approved revision is required and will be strictly adhered to.
Date of Application: October 20, 1992 Date Reissued: September 1, 1994 Date of Issuance: February 10, 1994 Date Amended:
FEDERAL AVIATION By Direction of the Administrator RICHARD E. JENNINGS (Signature) Manager TOMINIST RATION Denver Aircraft Certification Field Office Northwest Mountain Region, Denver, Colorado (Title)
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA00081DE
4. This aircraft will be operated in Restricted Category only when this modification is installed.
5. Restraint harness, wirecutter tool, and knife are required additional safety equipment to be on board during operations with this STC configuration.
6. A copy of this Certificate, Continuation Sheet, and FAA Airplane Flight Manual Supplement, dated February 10, 1994 or later approved revision must be maintained as part of the permanent records for the modified aircraft.
-----END-----
FAA FORM 8110-2- 1 (10-69) PAGE 3 OF 3 PAGES
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Mitsubishi Heavy Industries Ltd. | MU-2B-35 | A10SW |