STC SA00092MC

Number SA00092MC This Certificate issued to L-3 Communications Integrated Systems, L.P.

10001 Jack Finney Blvd.

Greenville, TX 75402 Part 23* of the Federal Aviation Regulations.

Original Product Type Certificate Number: A24CE *SEE PAGE 3 Make : Hawker Beechcraft Corporation Model : B300 Description of Type Design Change: Installation of an air-to-ground communication system. The Type Design Change is defined in accordance with L-3 Communications Mission Integration Division Sealed Drawing List SDL 10288-1 Revision A, dated 09 January 2013 or later FAA/ODA approved revisions.

1. This installation should not be incorporated in any aircraft unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft.

2. This approval is limited to only the installation made to this aircraft as defined in L-3 Communications Mission Integration Division Sealed Drawing List SDL 10288-1 Revision A, dated 09 January 2013, or later FAA/ODA approved revision, and is valid only as long as this aircraft is operated for governmental use.

Date of application : 13 March 2012 Date reissued :

Date of issuance : 11 January 2013 Date amended :

Dr. Michael E. Hopper(Signature) ODA-750173-SW Administrator

(Title)

Transfer the ownership of Supplemental Type Certificate Number

to (Name of transferee) (Address of transferee) (Number and street)

(City, State, and Zip code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street)

(City, State and Zip code) Extent of Authority (if licensing agreement):

Signature of grantor (In ink):

Number SA00092MC Date of Issuance: 11 January 2013

Limitations and Conditions: (Continued)

3. Instructions for Continued Airworthiness (ICA), L-3 Communications Mission Integration Division Document No. G10288.28.08 Revision NC, dated 03 December 2012, or later FAA accepted revision, must be made available to the operator at the time of installation.

4. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

5. Compatibility of this design change with previously approved modifications must be determined by the installer.

6. Installation of STC SA10688SC-D is a prerequisite for this STC.

Certification Basis:

Based on 14 CFR §§ 21.115 and 21.101, the certification basis for the Hawker Beechcraft B300 aircraft is as shown on TCDS A24CE .

--------------------------------------------------END-----------------------------------------------