What it approves
Installation of the provisions for wireless connection of a PED/EFB to Garmin G3000 avionics via Garmin FS-510
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
IMPORT SA00093IB
CESSNA DUESSELDORF CITATION
SERVICE CENTER GMBH 40474 DUESSELDORF
GERMANY 23 Title 14 of Code of Federal Regulations A1WI Textron Aviation Inc.
Textron 525, 525B
1. Installation of the provisions for wireless connection of a PED/EFB to Garmin G3000 avionics via Garmin FS-510 in accordance with Master Drawing List, 2020-24-16, rev IR dated July 20, 2020 or later EASA approved revisions.
(Description of Type Design Change continued on page 3 of 4)
1. The installer must determine whether this design change is compatible with previously approved modifications.
(Limitations and Conditions continued on page 3 of 4) February 21, 2021 January 30, 2023 Anthony E. Gallo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 4
IMPORT SA00093IB 4
IMPORT SA00093IB Date Issued: January 30, 2023 Description of Type Design Change: (continued from page 1 of 4)
2. Operation must be in accordance with Airplane Flight Manual Supplement, 2020-24-8,rev B dated September 29, 2020 or later EASA approved revisions.
3. Maintenance must be in accordance with Instructions for Continued Airworthiness, 202-24-10, rev B, dated December 12, 2022 or later EASA approved revisions.
Limitations and Conditions: (continued from page 1 of 4)
2. The EASA approved Airworthiness Limitations section of the Instructions for Continued Airworthiness referenced in the Description of the Type Design Section of this STC is mandatory.
3. The aircraft must be operated in accordance with the operations limitations section of the Airplane Flight Manual Supplement referenced in the Description of Type Design section of this STC.
4. This STC is only applicable to Textron 525: MSN 525-0685, MSN 525-0800 and onwards; and Textron 525B MSN 525-B-0057, MSN 525B-0451 and onwards.
5. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
Certification Basis:
Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for changes that are not significant in FAA order 8110.48A, the certification basis for this modification are as follows:
a. The Type Certification basis for the 525 series is shown on TCDS A1WI for parts not changed or not affected by the change.
(Certification Basis Continued on Page 4 of 4) 3 4
IMPORT SA00093IB Date Issued: January 30, 2023 (Certification Basis Continued from Page 3 of 4)
b. The Type Certification basis for the 525 series on A1WI for parts changed or affected by the change except for the following:
Regulations at latest amendment 23-0 through 23-63: §§ 23.1301,
23.1303, 23.1309, 23.131.
----END---- 4 4
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.