STC SA00122MC

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title 3 SA00122MC L3 Vertex Aerospace 8970 Hangar Road San Angelo, TX 76904 Federal Aviation Regulations 23 Add WAAS/LPV functionality in accordance with Global Aviation Technologies Master Drawing List (MDL) MDL502913-34507, Revision A, dated January 29, 2015 and FAA approved February 27, 2015, or later FAA approved revision.

1. A prerequisite to this installation is the installation of the following STCs and Service Bulletins, inclusive of all limitations noted on the certificate:

a. STC SA10965SC-Rockwell Collins Pro-Line 21 Upgrade

b. STC SA00098MC-Aural Warning Engine Exceedance

c. STC SA01434WI-D-Collins GPS-4000 Installation (See continuation sheet 3 of 3 for additional limitations) Derek Morgan Manager Military Certification Office Beechcraft Corportation B300 and B300C (UC-12W)

March 11, 2016 September 2, 2014 February 27, 2015 A24CE

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

4 SA00122MC

FAA Form 8110-2 (5/14) Page 3 of

1. Prerequisites continued:

d. The following Rockwell Collins Service Bulletins: SB504, SB507, SB536, SB543, SB544, SB547, SB555, SB557

2. Instructions for Continued Airworthiness, document ICA502913-34507, Revision A, titled: "Instructions for the Continued Airworthiness for the WAAS/LPV Installation in the Beechcraft B300/B300C aircraft”, dated January 22, 2015, or later FAA accepted revision is required for this installation and shall be made available to the operator at the time of this installation for incorporation into the operator’s maintenance program.

3. Airplane Flight Manual Supplement for Beechcraft Models B300/B300C with WAAS/SBAS/LPV Installation, document FMS502913-34507, Revision IR, dated and FAA approved February 27, 2015, shall be made available to the operator at the time of this installation for incorporation into the operator’s flight manual.

4. Compatibility of this design change with previously approved modifications must be determined by the installer.

5. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of the permission.

-----------------------------------------------------------------------------------END-------------------------------------------------------------------------------------

SA00122MC