What it approves
Outer Mold Line (OML) modification to include aircraft survivability equipment provisions, structural provisions for a new mission antenna suite and relocation of existing antenna
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
SA00159MC Sierra Nevada Company, LLC 18632 Jarkey Drive Hagerstown, MD 21742, United States 23 Chapter 14 CFR A24CE Textron Aviation Inc.
Models B300, B300C Outer Mold Line (OML) modification to include aircraft survivability equipment provisions, structural provisions for a new mission antenna suite and relocation of existing antenna in accordance with
1) Sierra Nevada Company Master Data List, Document Number 03120000, Revision A, dated August 27, 2018, FAA Approved November 13, 2018, or later FAA approved revision continued on page 3
1) A prerequisite to this installation are the installation of the Sierra Nevada Company STC SA03349NY, configuration 1, and Sierra Nevada Company STC SA03087NY.
continued on page 3 August 17, 2016 11/19/2018; 07/05/2019; 07/09/2024 November 13, 2018 William Eckler ODA administrator, ODA-833355-CE 3
SA00159MC 3
SA00159MC Description, continued from page 1
2) Instruction for Continued Airworthiness, Document Number 03120102, Revision B, dated June 14, 2018, FAA accepted November 13, 2018, or later FAA accepted revision
3) Airplane Flight Manual Supplement, Document Number 03120103, Revision A, dated October 15, 2018, or later FAA approved revision
Limitations, continued from page 1
2) A prerequisite to this installation is the modification per Hawker Beechcraft drawing 130M000030 or kit drawing 130-4014 for increased gross weights and increased fuel capacity, or modification per Hawker Beechcraft drawing 130M000009 or kit drawing 130-4030 for increased gross weights.
3) The FAA has not certified the equipment for which these provisions are intended.
You must get additional FAA approval to install this equipment. The FAA must evaluate the installation to ensure it complies with the applicable airworthiness standards.
4) If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of permission.
5. The installer must determine whether this design change is compatible with previously approved modifications.
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 2
Every issue · 4
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| July 9, 2024 | Reissued, current | Certificate |
| July 5, 2019 | Reissued, current | Certificate |
| November 19, 2018 | Reissued, earlier issue | Certificate |
| November 13, 2018 | Issued, earlier issue | Certificate |