STC SA00198MC

SA00198MC Spec Ops Technology, LLC.

37 Greenwich Dr.

Jackson, NJ 08527 23 Title 14 CFR A62CE Costruzioni Aeronautiche Tecnam S.P.A P2006T Installation of mission equipment, to include operator console, RADAR, radome, equipment rack and various antenna in accordance with Master Data List document number 16SOT01, Revision A, dated Aug.

25, 2021, FAA Approved Sept. 3, 2021 or later FAA approved revision; Instructions for Continued Airworthiness document number 16SOT01-ICA, Revision -, dated Nov. 13, 2020, FAA Approved Sept. 3, 2020, or later FAA approved revision; (Continued on page 3)

1) The installer must determine whether this design change is compatible with previously approved modifications.

(Continued on page 3) August 1, 2021 September 3, 2021 Trenton Shepherd, Acting Manager, MCO Branch 3

SA00198MC 3

SA00198MC Description of Change (Continued)

and Aircraft Flight manual Supplement document number 16SOT01-AFM, Revision IR, FAA Approved Aug. 31, 2021 or later FAA approved revision.

Limitations and Conditions (Continued)

2) You cannot use descriptive data from this design change to duplicate other products.

This approval is limited to only the installation made in Costruzioni Aeronautiche Tecnam S.P.A, Model P2006T, Serial Number 160/US. This STC does not permit manufacturing of parts for multiple installations.

3) The following Costruzioni Aeronautiche Tecnam S.P.A Design Changes must be installed as a prerequisite for this STC:

i) MOD2006/207 Cabin hatch for camera installation ii) MOD2006/261 Tail Cone Hatch iii) MOD2006/202 Replacement of existing 40A alternators with 70A alternators iv) MOD2006/204 Installation of Converter Box

v) MOD2006/015 Weight Increment

4) This STC is limited to military/government use only.

Certification Basis:

The certification basis for this alteration is the same as the basic aircraft (shown on TCDS A62CE) with the following exception: 14 CFR 23.1306 Amendment 61

---END--- 3 3