STC SA00275SE

Supplemental type certificate · Cub Crafters Inc

Holder
Cub Crafters Inc · United States
Status
Current · Reissued
Status date
January 26, 2012
Applied
July 5, 1994
Product
Aircraft · Single-Engine
Certification basis
Part 3, Part 21
Data sheet
TCDS1A2

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 5, 2025.

What it approves

Fabrication and installation of vortex generators mounted on the wings and a tail strake mounted on either side of the empennage.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

Number SA00275SE This certificate, issued to Cub Crafters, Inc.

1918 South 16th Avenue Yakima, WA 98903-1212 Part 3 of the Civil Aviation Regulations.

Original ProductType Certificate Number: 1A2 Make: Piper Model: PA-18, PA-18S, PA-18 “105,” PA-18S “105,” PA-18A, PA-18 “125,” PA-18S “125,” PA-18 “135,” PA-18S “135,” PA-18A “135,” PA-18AS “135,” PA-18 “150,” PA-18A “150,” PA-18S “150,” PA-18AS “150,” PA-19, PA-19S

Description of the Type Design Change: Fabrication and installation of vortex generators mounted on the wings and a tail strake mounted on either side of the empennage in accordance with a Federal Aviation Administration (FAA) approved copy of Cub Crafters, Inc. Master Drawing List No. CR122900, Revision A, October 28, 2002, or later FAA-approved revision.

Limitations and Conditions: Approval of this change in type design applies to the standard Landplane, Floatplane, and Skiplane configurations of the airplane models listed above only. This approval should not be extended to other aircraft on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this certificate must be maintained as part of the permanent records for the modified aircraft.

The Cub Crafters, Inc. modification consists of seventy-two (72) vortex generators mounted on the wings and two

(2) tail strakes mounted on either side of the empennage. If more than six (6) vortex generators are missing or damaged, or if a tail strake is missing or damaged, the aircraft is not airworthy and must be repaired before flight.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: July 5, 1994 Date reissued: 3/6/98; 5/27/99; 6/30/99; 1/26/12 Date of issuance: January 5, 1996 Date amended: August 14, 1998; December 6, 2002

(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 16

MakeModelData sheet
Piper Aircraft Inc.PA-181A2
Piper Aircraft Inc.PA-18-105 (Special)1A2
Piper Aircraft Inc.PA-18-125 (Army L-21A)1A2
See all 16 models