STC SA00341BO

the Federal Aviation Regulations.

SA00341BO ATI Engineering Services, LLC 469 Airport Road, Hangar 9 Johnstown, Pennsylvania 15904 Part 23

A37CE Cessna 208B

1. The Airplane Flight Manual Supplement FMS-131024, Revision -, dated May 14, 2014, or later FAA-approved revision must be carried on the airplane during all flights.

2. Maintenance must be in accordance with the Instructions for Continued Airworthiness (ICA) ICA-131024, Revision -, dated April 14, 2014, or later FAA-approved revision.

(Limitations and Conditions continued on page 3 of 3) 12/13/2013 08/27/2019 08/05/2024 05/20/2014 Christina M. Underwood Manager, East Certification Branch Compliance & Airworthiness Division Aircraft Certification Service 3 Installation of an NVIS / NVG Compatible Lighting System in accordance with Installation Drawing List IDL-131024, Revision 3, dated May 9, 2014, or later FAA-approved revision.

11/26/2021

SA00341BO 08/05/2024 3

SA00341BO 08/05/2024 Limitations and Conditions continued:

3. The ICA must be made available to the operator at the time of installation.

4. Installation of this NVIS system does not authorize the operator to use NVGs. If the type of operation requires an operational authorization, the operator must coordinate with the FAA or with the responsible aviation authority to obtain this authorization.

5. Once an airplane is modified with this STC, any future interior or exterior modification that adds or changes systems that emit or reflect light has the potential to adversely affect NVG compatibility and may require a reevaluation by the response FAA Aircraft Certification Office.

6. Compatibility of this design with previously approved modifications must be determined by the installer.

Certification Basis:

Based on 14 CFR § 21.115 and § 21.101, and the FAA policy for design changes that are identified as not significant in FAA Order 8110.48, the certification basis for the Cessna 208B aircraft with the installation of the NVIS / NVG Compatible Lighting System is as follows:

a. The type certification basis for parts not changed or not affected by the change is shown on TCDS A37CE.

b. The modification certification basis for parts changed or affected by the change since the reference application date, December 13, 2014, is based upon part 23 as amended by Amendment 23-62 as follows:

Regulations at the latest amendment 23-0 through 23-62

23.1, 23.25(a), 23.771(a), 23.773(a)(2), 23.853(a), 23.867(a), 23.1301, 23.1308,

23.1309(a)(c), 23.1311(a)(1)(2), 23.1321(e), 23.1322, 23.1351(a), 23.1357(a)(b)(c),

23.1359(a)(c), 23.1367, 23.1381(a)(b), 23.1383, 23.1385, 23.1387, 23.1389, 23.1391,

23.1393, 23.1395, 23.1397, 23.1401, 23.1431(b), 23.1501, 23.1523, 23.1525, 23.1527,

23.1529, 23.1559(c), 23.1581, 23.1583(g)(h) Regulations at an intermediate amendment None Regulations at the amendment level in TCDS A37CE None ------------------------------------------------------END-------------------------------------------------- 3 3 Add Page