What it approves
Installation of an Airborne Operator Workstation
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
the Title 14 Code of Regulations.
SA00419BO ATI Engineering Services, LLC 469 Airport Road, Hangar 9 Johnstown, Pennsylvania 15904 Part 23
A37CE Textron Aviation, Inc.
208B
1. This STC is applicable to all serial numbers for this Textron Aviation Model 208B aircraft.
(Limitations and Conditions continued on Page 3 of 3) 09/09/2022 06/11/2024 05/30/2024 Christina M. Underwood Manager, East Certification Branch Compliance & Airworthiness Division Aircraft Certification Service 3
1. Installation of an Airborne Operator Workstation in accordance with ATI Engineering Services Installation/Manufacturing Document List, Document no. IDL-210928, Revision 7, dated October 30, 2023, or later FAA approved revision.
2. Flight Manual Supplement (FMS) Document no. FMS-210928, Revision IR, FAA approved on June 6, 2024, or later FAA approved revision.
3. Instructions for Continued Airworthiness (ICA), Document no. ICA-210928, Revision 2, dated December 4, 2023, or later FAA accepted revision.
08/05/2024
SA00419BO 08/05/2024 3
SA00419BO 08/05/2024 Limitations and Conditions continued:
2. The approved configurations for this STC are for provisions only and the equipment are non-operational. The FAA has not certified the equipment for which these provisions are intended.
Additional FAA approval is required to activate any installed equipment.
3. Operation of the aircraft must be in accordance with the limitation section of the FMS as referenced in the Description of Type Design Change above.
4. The installer must determine whether this design change is compatible with previously approved modifications.
5. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
Certification Basis:
Based on 14 CFR § 21.115 and § 21.101, and the FAA policy for design changes that are identified as not significant in FAA Order 8110.48A, the certification basis for the Textron Aviation Model 208B aircraft is as follows:
a. The type certification basis for parts not changed or not affected by the change is shown on TCDS A37CE.
b. The modification certification basis for parts changed or affected by the change since the reference application date, September 9, 2022, is based upon part 23 as amended by Amendment 23-50 as follows:
Regulations at the latest amendment 23-0 through 23-50
23.1, 23.301, 23.305(a), 23.561(b), 23.607, 23.611, 23.613, 23.615, 23.807, 23.853(d)(3)(i),
23.1525, 23.1589(a) Regulations at an intermediate amendment None Regulations at the amendment level in TCDS A37CE
23.21, 23.29, 23.303, 23.305(a), 23.307(a), 23.561(a), 23.601, 23.603(a)(2)(3)(b), 23.605(a),
23.609, 23.625(a), 23.853(a), 23.1301(a)(b)(c), 23.1501(b), 23.1524, 23.1529, 23.1557(a),
23.1581(a)(1)(2)(b)(2)(i)(ii)(3)(d), 23.1583(c)(d)(h)(l) ------------------------------------------------------END-------------------------------------------------- 3 3 Add Page
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Textron Aviation Inc. | 208B | A37CE |
Every issue · 3
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| August 5, 2024 | Reissued, current | Certificate |
| June 11, 2024 | Reissued, earlier issue | Certificate |
| May 30, 2024 | Issued, earlier issue | Certificate |