STC SA00422WI

Supplemental type certificate · Air Plains Services Corporation

Holder
Air Plains Services Corporation · United States
Status
Current · Amended
Status date
December 18, 2018
Applied
March 15, 1996
Product
Aircraft · Single-Engine
Certification basis
Part 21
Data sheet
TCDS3A21

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 5, 2025.

What it approves

Installation of McCauley Propeller Model D3A34C402/90DFA -8, -10 and associated changes.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title Air Plains Services Corporation 439 North West Road Wellington, KS 67202 3 SA00422WI Civil Air Regulations 3

1. For all models listed above, the installation of McCauley D3A34C402/90DFA-( ) propeller is limited to not over 82 inches and not under 78 inches diameter range with no operating restriction placard for use with IO-520-A, IO-520-J, and IO-520-L engines.

Continued on page 3.

Textron Aviation (formerly Cessna) 210E, F, G, H, J, K, L, M, N, R Installation of McCauley Propeller Model D3A34C402/90DFA-8, -10 and associated changes. Data required:

1. C S Industries Installation Instructions No. 402A, Rev -, dated April 19, 1996; or

2. Air Plains Master Document List No. 402A-MDL, Rev 2, dated December 18, 2018; and

3. Air Plains Airplane Flight Manual Supplement No. 402A-FM, Rev 1, dated December 18, 2018, or later FAA Approved revision to 1, 2, or 3.

September 22, 2005 December 18, 2018 March 15, 1996 April 19, 1996 3A21 Charles Riddle Associate ACO Manager, AIR-7K2 Wichita ACO Office

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 SA00422WI

FAA Form 8110-2 (5/14) Page 3 of

3 Date issued: December 18, 2018

Limitations & Conditions (continued):

2. For Models 210K, L, M, N, R, the installation of McCauley D3A34C402/90DFA-( ) propeller is limited to not over 82 inches and not under 78 inches diameter range with no operating restriction placard for use with IO-550-L engines.

3. Compatibility of this design change with previously approved modifications must be determined by the installer.

---- END ---- SA00422WI

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 10

MakeModelData sheet
The Cessna Aircraft Company210E3A21
The Cessna Aircraft Company210F3A21
The Cessna Aircraft Company210G3A21
The Cessna Aircraft Company210H3A21
The Cessna Aircraft Company210J3A21
The Cessna Aircraft Company210K3A21
The Cessna Aircraft Company210L3A21
The Cessna Aircraft Company210M3A21
The Cessna Aircraft Company210N3A21
The Cessna Aircraft Company210R3A21

Every issue · 2

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
December 18, 2018Amended, currentCertificate
September 22, 2005Reissued, earlier issueCertificate