What it approves
Installation of replacement fuel cell assemblies
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to
Part * of the Regulations.
Description of Type Design Change: Installation of replacement fuel cell assemblies according to FFC Drawing P569-1, -2, -3 and P570-1, -2, -3 dated 10/10/94 or FAA approved revisions.
Limitations and Conditions: This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effects upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of t h a t p e r m i s s i o n .
(See continuation 3of 3)
FFC Manufacturing 4010 Pilot Dr., Suite 103 Memphis, TN 38118 1A10 Make: Piper Model: (See continuation 3 of 3) Date reissued: April 16, 2009
( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office
( Title)
Date of application: August 10, 1994
Date of issuance: October 21, 1994
FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES
Number SA00519AT-D
FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES
Number SA00519AT-D
Model (continued):
Model: Piper Aztec PA23-250 Serial Number: 7654001 AND UP
Limitations and Conditions – Continued:
FFC Manufacturing part numbers 569 (left hand) and 570 (right hand) are replacements for Piper part numbers 454-369 (left hand) and 454-370 (right hand) for the above models.
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Piper Aircraft Inc. | PA-E23-250 | 1A10 |