STC SA00622DE

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate FAA Form 8110-2 (5/14) Page 1 of 3

Number: SA00622DE This certificate issued to:

Aeroptic LLC 250 Clark Street North Andover, MA 01845 Part 23 of the Federal; Aviation Regulations.

See attached FAA Approved Model List (AML), Document No.

AMLSA00622DE, Revision A, FAA approved on January 18, 2007, or later FAA approved revision, for the list of approved airplane models, applicable installation data requirements, and specific limitations.

Installation of John Deere AGRI Services, Inc. JD3 Aerial Imaging System, in accordance with Master Drawing List (MDL), Document No. JD3MDL, Rev C, dated January 11, 2007, FAA approved January 18, 20017, or later FAA approved revision.

1. Compatibility of this design with previously approved modifications must be determined by the installer.

(continued on Page 3 of 3)

Date of Application: August 14, 2006 Date reissued: November 15, 2007, November 29, 2017 Date of Issuance: January 18, 2007 Date amended:

By Direction of the Administrator Signature Kevin Dickert Manager, Boston ACO Branch Title

This

TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number._ To (Name and address of transferee) Make:

Address (Number and Street, City, State, and ZIP Code):

From (Name and address of grantor) Make:

Address (Number and Street, City, State, and ZIP Code):

This

FAA Form 8110-2 (5/14) Page 2 of 3

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate FAA Form 8110-2 (5/14) Page 3 of 3

(Continuation Sheet) Number: SA00622DE

Limitations and Conditions: (continued from Page 1 of 3)

2. Operation must be in accordance with the applicable Aircraft Flight Manual Supplement (AFMS) as listed in AMLSA00622DE Revision A, or later FAA approved revision.

The AFMS must be carried in the aircraft during all flights.

3. Maintenance must be in accordance with Instructions for Continued Airworthiness (ICA), Document number JD3-ICA, Revision B, dated January 18, 2007, or later FAA accepted revision.

The ICA must be made available to the operator at the time of installation.

4. Compatibility of this design with previously approved modifications must be determined by the installer.

Certification Basis:

Based on 14 CFR § 21.115 and § 21.101, and the FAA policy for design changes that are identified as not significant in FAA Order 8110.48, the certification basis for the AMLSA00622DE listed Make Model aircraft is as follows:

a. The type certification basis for parts not changed or not affected by the change is shown on the applicable TCDS.

b. The modification certification basis for parts changed or affected by the change is based upon part 23 as follows:

Regulations at the latest amendment Not captured.

Regulations at an intermediate amendment Not captured.

Regulations at the amendment level in the applicable TCDS Not captured.

------------------------------------------------------------END-------------------------------------------------------

This