STC SA00711DE

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA00711DE This certificate issued to: KNR-INC.

P.O. Box 1010.

2150 County Rd. 111 Evanston, WY 82931 Part 23 of the Federal Aviation Poegulations. *Certification basis established in Type Certificate Data Sheet applicable to the listed models in AML SA00711DE Rev.IR or later FAA approved revisions.

Original Product - Type Certificate Number: See attached FAA Approved Model List (AML), Document No. SA00711DE Rev.

Make: IR or later FAA approved revisions for Model: applicable installation data requirements the list of approved airplane models, and specific limitations Description of Type Design Change:

Installation of an Aero Vision International, Inc. Metal Halide High Intensity Discharge (HID) lamp for use in the landing and taxi lighting system, in accordance with the applicable Master Drawing List, as listed in AML SA00711DE Revision IR, dated May 13, 2010, FAA approved May 13, 2010, or later FAA approved revision.

1.) Compatibility of this design change with previously approved modifications must be determined by the installer.

2.) Instructions for Continued Airworthiness, Document No. as listed in AML SA00711DE Rev. IR, dated May 13, 2010 or later FAA approved revision, required for this installation.

3.) A copy of this certificate must be maintained as part of the permanent records of the aircraft.

If the holder agrees to permit another person to use this certificate, the holder shall give the other person written

suspended, revoked or a termination date is otherwise established by the Administrator of the Federal Aviation Administration Date of Application: July 6, 2007 Date Reissued:

Date of Issuance: May 13, 2010 Date Amended:

FEDERAL AVIATION By Direction of the Administrator Todd G. Dixon TOMINISTRATO Manager Denver Aircraft Certification Office (Title)