STC SA00715CH

SA00715CH Crown MN Aviation, LLC 33361 Cobalt Circle NW Cambridge, MN 55008 Part 23 Federal Aviation Regulations See attached Eligibility list for a list of approved aircraft models and applicable airworthiness regulations.

1. Continued Airworthiness Instructions: Repairs to the fuel gauge and/or its installation shall meet the requirements of 14 Code of Federal Regulations 43.13(b).

Limitations and Conditions: continued on page 3 of 3) 07/08/1996 08/22/1997 06/09/2010 Christina M. Underwood Manager, East Certification Branch Compliance & Airworthiness Division Aircraft Certification Service 3 Installation of an Air-Energy Service, Inc. (AESI) P/N J-3-212 ball type, sight fuel tank quantity gauge on the side of an AESI P/N AESI-125 twelve-gallon wing tank per Installation Instructions Drawing No. AESI-J-3-210, revision original, dated March 19, 1997, or later FAA approved revision.

10/08/2004, 02/09/2009, 06/26/2018, 09/10/2024

SA00715CH 09/10/2024 3

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA00715CH Effective Date: 09/10/2024 Limitations and Conditions: continued:

2. Compatibility of this design with previously approved modifications must be determined by the installer.

3. Eligibility List:

Piper Model Approved Type Type Certificate Number: Certification Basis J-3 660 Aeronautics Bulletin 7-A Amended October 01, 1934 J-3C-40, J-3C-50, J-3C-50S, J-3C-65, A-691 CAR 4a J-3C-65S, L-4, L-4A, L-4B, L-4H, Amended April 07, 1950 L-4J, PA-11, PA-11S J-3F-50, J-3F-50S, J-3F-60, J-3F-60S, A-692 CAR 4a J-3F-65 (Army L-4D), J-3F-65S Amended April 07, 1950 J-3P 695 CAR 04 Amended November 01, 1943 J-3L, J-3L-S, J-3L-65 (Army L-4C), A-698 CAR 4a J-3L-65S Amended April 07, 1950 --END--