What it approves
Installation of replacement fuel cell assemblies.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to
Part * of the Regulations.
Installation of replacement fuel cell assemblies according to FFC Manufacturing Drawings B-2622-1-1, B2622-1-2 dated February 17, 1995 and FFC Manufacturing Drawings B231-1 and B231-2 dated January 04, 1995 or later FAA approved revision.
Limitations and Conditions: This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effects upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
(See continuation 3 of 3)
FFC Manufacturing 4010 Pilot Dr., Suite 103 Memphis, TN 38118 A12CE Make: Beech Model: (SEE CONTINUATION 3 OF 3) Date reissued: November 6, 2008; April 16, 2009
( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office
( Title)
Date of application: March 15, 1995
Date of issuance: May 12, 1995
FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES
Number SA00722AT-D
FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES
Number SA00722AT-D
Model: Continuation
FFC replacement part numbers 2622-1 (-2) are eligible for installation on all serial series on Beech aircraft models 60, A60, and B60.
Limitations and Conditions – Continued:
FFC part numbers 2622-1 and 2622-2 will be replacement for Beech part numbers 60-389022-1 and 60-389022-2.
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.