What it approves
Installation of replacement fuel cell assemblies
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part * of the Regulations.
Description of Type Design Change: Installation of replacement fuel cell assemblies according to FFC Manufacturing Drawings, B-214-1 and B-214-2 dated March 1, 1995 and FFC Manufacturing Drawings B-2013-1 dated February 17. 1995 or later FAA approved revisions.
Limitations and Conditions: This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effects upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
(See continuation 3 of 3)
FFC Manufacturing 4010 Pilot Dr., Suite 103 Memphis, TN 38118 A14CE Make: Beech Kingair 100,Serial Series B-1, B-90 except B-93, BE-1 and after Model:
Date reissued: April 27, 2009
( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office
( Title)
Date of application: May 17, 1995
Date of issuance: June 20, 1995
FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES
Number SA00726AT-D
FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES
Number SA00726AT-D
FFC Manufacturing part numbers 2013-3(-4) will be replacements for Beech part numbers 002- 920013-3(-4).
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Hawker Beechcraft Corporation | 100 | A14CE |